mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-05 10:33:42 +08:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
268 lines
5.9 KiB
Plaintext
268 lines
5.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Altera Corporation
|
|
*
|
|
* This file is generated by sopc2dts.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "Altera NiosII Max10";
|
|
compatible = "altr,niosii-max10";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu: cpu@0 {
|
|
u-boot,dm-pre-reloc;
|
|
device_type = "cpu";
|
|
compatible = "altr,nios2-1.1";
|
|
reg = <0x00000000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
altr,exception-addr = <0xc8000120>;
|
|
altr,fast-tlb-miss-addr = <0xc0000100>;
|
|
altr,has-div = <1>;
|
|
altr,has-initda = <1>;
|
|
altr,has-mmu = <1>;
|
|
altr,has-mul = <1>;
|
|
altr,implementation = "fast";
|
|
altr,pid-num-bits = <8>;
|
|
altr,reset-addr = <0xd4000000>;
|
|
altr,tlb-num-entries = <256>;
|
|
altr,tlb-num-ways = <16>;
|
|
altr,tlb-ptr-sz = <8>;
|
|
clock-frequency = <75000000>;
|
|
dcache-line-size = <32>;
|
|
dcache-size = <32768>;
|
|
icache-line-size = <32>;
|
|
icache-size = <32768>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x08000000 0x08000000>,
|
|
<0x00000000 0x00000400>;
|
|
};
|
|
|
|
sopc0: sopc@0 {
|
|
device_type = "soc";
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "altr,avalon", "simple-bus";
|
|
bus-frequency = <75000000>;
|
|
|
|
jtag_uart: serial@18001530 {
|
|
compatible = "altr,juart-1.0";
|
|
reg = <0x18001530 0x00000008>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <7>;
|
|
};
|
|
|
|
a_16550_uart_0: serial@18001600 {
|
|
compatible = "altr,16550-FIFO32", "ns16550a";
|
|
reg = <0x18001600 0x00000200>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <1>;
|
|
auto-flow-control = <1>;
|
|
clock-frequency = <50000000>;
|
|
fifo-size = <32>;
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
ext_flash: quadspi@0x180014a0 {
|
|
compatible = "altr,quadspi-1.0";
|
|
reg = <0x180014a0 0x00000020>,
|
|
<0x14000000 0x04000000>;
|
|
reg-names = "avl_csr", "avl_mem";
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
flash0: nor0@0 {
|
|
compatible = "micron,n25q512a";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
sysid: sysid@18001528 {
|
|
compatible = "altr,sysid-1.0";
|
|
reg = <0x18001528 0x00000008>;
|
|
};
|
|
|
|
rgmii_0_eth_tse_0: ethernet@400 {
|
|
compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0";
|
|
reg = <0x00000400 0x00000400>,
|
|
<0x00000820 0x00000020>,
|
|
<0x00000800 0x00000020>,
|
|
<0x000008c0 0x00000008>,
|
|
<0x00000840 0x00000020>,
|
|
<0x00000860 0x00000020>;
|
|
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp",
|
|
"tx_csr", "tx_desc";
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <2 3>;
|
|
interrupt-names = "rx_irq", "tx_irq";
|
|
rx-fifo-depth = <8192>;
|
|
tx-fifo-depth = <8192>;
|
|
address-bits = <48>;
|
|
max-frame-size = <1518>;
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
altr,has-supplementary-unicast;
|
|
altr,enable-sup-addr = <1>;
|
|
altr,has-hash-multicast-filter;
|
|
altr,enable-hash = <1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&phy0>;
|
|
rgmii_0_eth_tse_0_mdio: mdio {
|
|
compatible = "altr,tse-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet_pll: clock@0 {
|
|
compatible = "altr,pll-1.0";
|
|
#clock-cells = <1>;
|
|
|
|
enet_pll_c0: enet_pll_c0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "enet_pll-c0";
|
|
};
|
|
|
|
enet_pll_c1: enet_pll_c1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
clock-output-names = "enet_pll-c1";
|
|
};
|
|
|
|
enet_pll_c2: enet_pll_c2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <2500000>;
|
|
clock-output-names = "enet_pll-c2";
|
|
};
|
|
};
|
|
|
|
sys_pll: clock@1 {
|
|
compatible = "altr,pll-1.0";
|
|
#clock-cells = <1>;
|
|
|
|
sys_pll_c0: sys_pll_c0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sys_pll-c0";
|
|
};
|
|
|
|
sys_pll_c1: sys_pll_c1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "sys_pll-c1";
|
|
};
|
|
|
|
sys_pll_c2: sys_pll_c2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <75000000>;
|
|
clock-output-names = "sys_pll-c2";
|
|
};
|
|
};
|
|
|
|
sys_clk_timer: timer@18001440 {
|
|
compatible = "altr,timer-1.0";
|
|
reg = <0x18001440 0x00000020>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <0>;
|
|
clock-frequency = <75000000>;
|
|
};
|
|
|
|
led_pio: gpio@180014d0 {
|
|
compatible = "altr,pio-1.0";
|
|
reg = <0x180014d0 0x00000010>;
|
|
altr,gpio-bank-width = <4>;
|
|
resetvalue = <15>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-bank-name = "led";
|
|
};
|
|
|
|
uart_0: serial@0x18001420 {
|
|
compatible = "altr,uart-1.0";
|
|
reg = <0x18001420 0x00000020>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <1>;
|
|
clock-frequency = <75000000>;
|
|
current-speed = <115200>;
|
|
};
|
|
|
|
button_pio: gpio@180014c0 {
|
|
compatible = "altr,pio-1.0";
|
|
reg = <0x180014c0 0x00000010>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <6>;
|
|
altr,gpio-bank-width = <3>;
|
|
altr,interrupt-type = <2>;
|
|
edge_type = <1>;
|
|
level_trigger = <0>;
|
|
resetvalue = <0>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-bank-name = "button";
|
|
};
|
|
|
|
sys_clk_timer_1: timer@880 {
|
|
compatible = "altr,timer-1.0";
|
|
reg = <0x00000880 0x00000020>;
|
|
interrupt-parent = <&cpu>;
|
|
interrupts = <5>;
|
|
clock-frequency = <75000000>;
|
|
};
|
|
|
|
fpga_leds: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_fpga0: fpga0 {
|
|
label = "fpga_led0";
|
|
gpios = <&led_pio 0 1>;
|
|
};
|
|
|
|
led_fpga1: fpga1 {
|
|
label = "fpga_led1";
|
|
gpios = <&led_pio 1 1>;
|
|
};
|
|
|
|
led_fpga2: fpga2 {
|
|
label = "fpga_led2";
|
|
gpios = <&led_pio 2 1>;
|
|
};
|
|
|
|
led_fpga3: fpga3 {
|
|
label = "fpga_led3";
|
|
gpios = <&led_pio 3 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "debug console=ttyS0,115200";
|
|
stdout-path = &a_16550_uart_0;
|
|
};
|
|
};
|