u-boot/arch/arm/lib/lib1funcs.S
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

428 lines
8.6 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
*
* Author: Nicolas Pitre <nico@fluxnic.net>
* - contributed to gcc-3.4 on Sep 30, 2003
* - adapted for the Linux kernel on Oct 2, 2003
*/
/*
* Copyright 1995, 1996, 1998, 1999, 2000, 2003 Free Software Foundation, Inc.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* U-Boot compatibility bit, define empty UNWIND() macro as, since we
* do not support stack unwinding and define CONFIG_AEABI to make all
* of the functions available without diverging from Linux code.
*/
#ifdef __UBOOT__
#define UNWIND(x...)
#define CONFIG_AEABI
#endif
.macro ARM_DIV_BODY dividend, divisor, result, curbit
#if __LINUX_ARM_ARCH__ >= 5
clz \curbit, \divisor
clz \result, \dividend
sub \result, \curbit, \result
mov \curbit, #1
mov \divisor, \divisor, lsl \result
mov \curbit, \curbit, lsl \result
mov \result, #0
#else
@ Initially shift the divisor left 3 bits if possible,
@ set curbit accordingly. This allows for curbit to be located
@ at the left end of each 4 bit nibbles in the division loop
@ to save one loop in most cases.
tst \divisor, #0xe0000000
moveq \divisor, \divisor, lsl #3
moveq \curbit, #8
movne \curbit, #1
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
1: cmp \divisor, #0x10000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #4
movlo \curbit, \curbit, lsl #4
blo 1b
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
1: cmp \divisor, #0x80000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #1
movlo \curbit, \curbit, lsl #1
blo 1b
mov \result, #0
#endif
@ Division loop
1: cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
orrhs \result, \result, \curbit
cmp \dividend, \divisor, lsr #1
subhs \dividend, \dividend, \divisor, lsr #1
orrhs \result, \result, \curbit, lsr #1
cmp \dividend, \divisor, lsr #2
subhs \dividend, \dividend, \divisor, lsr #2
orrhs \result, \result, \curbit, lsr #2
cmp \dividend, \divisor, lsr #3
subhs \dividend, \dividend, \divisor, lsr #3
orrhs \result, \result, \curbit, lsr #3
cmp \dividend, #0 @ Early termination?
movsne \curbit, \curbit, lsr #4 @ No, any more bits to do?
movne \divisor, \divisor, lsr #4
bne 1b
.endm
.macro ARM_DIV2_ORDER divisor, order
#if __LINUX_ARM_ARCH__ >= 5
clz \order, \divisor
rsb \order, \order, #31
#else
cmp \divisor, #(1 << 16)
movhs \divisor, \divisor, lsr #16
movhs \order, #16
movlo \order, #0
cmp \divisor, #(1 << 8)
movhs \divisor, \divisor, lsr #8
addhs \order, \order, #8
cmp \divisor, #(1 << 4)
movhs \divisor, \divisor, lsr #4
addhs \order, \order, #4
cmp \divisor, #(1 << 2)
addhi \order, \order, #3
addls \order, \order, \divisor, lsr #1
#endif
.endm
.macro ARM_MOD_BODY dividend, divisor, order, spare
#if __LINUX_ARM_ARCH__ >= 5
clz \order, \divisor
clz \spare, \dividend
sub \order, \order, \spare
mov \divisor, \divisor, lsl \order
#else
mov \order, #0
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
1: cmp \divisor, #0x10000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #4
addlo \order, \order, #4
blo 1b
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
1: cmp \divisor, #0x80000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #1
addlo \order, \order, #1
blo 1b
#endif
@ Perform all needed subtractions to keep only the reminder.
@ Do comparisons in batch of 4 first.
subs \order, \order, #3 @ yes, 3 is intended here
blt 2f
1: cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
cmp \dividend, \divisor, lsr #1
subhs \dividend, \dividend, \divisor, lsr #1
cmp \dividend, \divisor, lsr #2
subhs \dividend, \dividend, \divisor, lsr #2
cmp \dividend, \divisor, lsr #3
subhs \dividend, \dividend, \divisor, lsr #3
cmp \dividend, #1
mov \divisor, \divisor, lsr #4
subsge \order, \order, #4
bge 1b
tst \order, #3
teqne \dividend, #0
beq 5f
@ Either 1, 2 or 3 comparison/subtractions are left.
2: cmn \order, #2
blt 4f
beq 3f
cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
mov \divisor, \divisor, lsr #1
3: cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
mov \divisor, \divisor, lsr #1
4: cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
5:
.endm
.pushsection .text.__udivsi3, "ax"
ENTRY(__udivsi3)
ENTRY(__aeabi_uidiv)
UNWIND(.fnstart)
subs r2, r1, #1
reteq lr
bcc Ldiv0
cmp r0, r1
bls 11f
tst r1, r2
beq 12f
ARM_DIV_BODY r0, r1, r2, r3
mov r0, r2
ret lr
11: moveq r0, #1
movne r0, #0
ret lr
12: ARM_DIV2_ORDER r1, r2
mov r0, r0, lsr r2
ret lr
UNWIND(.fnend)
ENDPROC(__udivsi3)
ENDPROC(__aeabi_uidiv)
.popsection
.pushsection .text.__umodsi3, "ax"
ENTRY(__umodsi3)
UNWIND(.fnstart)
subs r2, r1, #1 @ compare divisor with 1
bcc Ldiv0
cmpne r0, r1 @ compare dividend with divisor
moveq r0, #0
tsthi r1, r2 @ see if divisor is power of 2
andeq r0, r0, r2
retls lr
ARM_MOD_BODY r0, r1, r2, r3
ret lr
UNWIND(.fnend)
ENDPROC(__umodsi3)
.popsection
.pushsection .text.__divsi3, "ax"
ENTRY(__divsi3)
ENTRY(__aeabi_idiv)
UNWIND(.fnstart)
cmp r1, #0
eor ip, r0, r1 @ save the sign of the result.
beq Ldiv0
rsbmi r1, r1, #0 @ loops below use unsigned.
subs r2, r1, #1 @ division by 1 or -1 ?
beq 10f
movs r3, r0
rsbmi r3, r0, #0 @ positive dividend value
cmp r3, r1
bls 11f
tst r1, r2 @ divisor is power of 2 ?
beq 12f
ARM_DIV_BODY r3, r1, r0, r2
cmp ip, #0
rsbmi r0, r0, #0
ret lr
10: teq ip, r0 @ same sign ?
rsbmi r0, r0, #0
ret lr
11: movlo r0, #0
moveq r0, ip, asr #31
orreq r0, r0, #1
ret lr
12: ARM_DIV2_ORDER r1, r2
cmp ip, #0
mov r0, r3, lsr r2
rsbmi r0, r0, #0
ret lr
UNWIND(.fnend)
ENDPROC(__divsi3)
ENDPROC(__aeabi_idiv)
.popsection
.pushsection .text.__modsi3, "ax"
ENTRY(__modsi3)
UNWIND(.fnstart)
cmp r1, #0
beq Ldiv0
rsbmi r1, r1, #0 @ loops below use unsigned.
movs ip, r0 @ preserve sign of dividend
rsbmi r0, r0, #0 @ if negative make positive
subs r2, r1, #1 @ compare divisor with 1
cmpne r0, r1 @ compare dividend with divisor
moveq r0, #0
tsthi r1, r2 @ see if divisor is power of 2
andeq r0, r0, r2
bls 10f
ARM_MOD_BODY r0, r1, r2, r3
10: cmp ip, #0
rsbmi r0, r0, #0
ret lr
UNWIND(.fnend)
ENDPROC(__modsi3)
.popsection
#ifdef CONFIG_AEABI
.pushsection .text.__aeabi_uidivmod, "ax"
ENTRY(__aeabi_uidivmod)
UNWIND(.fnstart)
UNWIND(.save {r0, r1, ip, lr} )
stmfd sp!, {r0, r1, ip, lr}
bl __aeabi_uidiv
ldmfd sp!, {r1, r2, ip, lr}
mul r3, r0, r2
sub r1, r1, r3
ret lr
UNWIND(.fnend)
ENDPROC(__aeabi_uidivmod)
.popsection
.pushsection .text.__aeabi_uidivmod, "ax"
ENTRY(__aeabi_idivmod)
UNWIND(.fnstart)
UNWIND(.save {r0, r1, ip, lr} )
stmfd sp!, {r0, r1, ip, lr}
bl __aeabi_idiv
ldmfd sp!, {r1, r2, ip, lr}
mul r3, r0, r2
sub r1, r1, r3
ret lr
UNWIND(.fnend)
ENDPROC(__aeabi_idivmod)
.popsection
#endif
.pushsection .text.Ldiv0, "ax"
Ldiv0:
UNWIND(.fnstart)
UNWIND(.pad #4)
UNWIND(.save {lr})
str lr, [sp, #-8]!
bl __div0
mov r0, #0 @ About as wrong as it could be.
ldr pc, [sp], #8
UNWIND(.fnend)
ENDPROC(Ldiv0)
.popsection
/* Thumb-1 specialities */
#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) && !defined(CONFIG_HAS_THUMB2)
.pushsection .text.__gnu_thumb1_case_sqi, "ax"
ENTRY(__gnu_thumb1_case_sqi)
push {r1}
mov r1, lr
lsrs r1, r1, #1
lsls r1, r1, #1
ldrsb r1, [r1, r0]
lsls r1, r1, #1
add lr, lr, r1
pop {r1}
bx lr
ENDPROC(__gnu_thumb1_case_sqi)
.popsection
.pushsection .text.__gnu_thumb1_case_uqi, "ax"
ENTRY(__gnu_thumb1_case_uqi)
push {r1}
mov r1, lr
lsrs r1, r1, #1
lsls r1, r1, #1
ldrb r1, [r1, r0]
lsls r1, r1, #1
add lr, lr, r1
pop {r1}
bx lr
ENDPROC(__gnu_thumb1_case_uqi)
.popsection
.pushsection .text.__gnu_thumb1_case_shi, "ax"
ENTRY(__gnu_thumb1_case_shi)
push {r0, r1}
mov r1, lr
lsrs r1, r1, #1
lsls r0, r0, #1
lsls r1, r1, #1
ldrsh r1, [r1, r0]
lsls r1, r1, #1
add lr, lr, r1
pop {r0, r1}
bx lr
ENDPROC(__gnu_thumb1_case_shi)
.popsection
.pushsection .text.__gnu_thumb1_case_uhi, "ax"
ENTRY(__gnu_thumb1_case_uhi)
push {r0, r1}
mov r1, lr
lsrs r1, r1, #1
lsls r0, r0, #1
lsls r1, r1, #1
ldrh r1, [r1, r0]
lsls r1, r1, #1
add lr, lr, r1
pop {r0, r1}
bx lr
ENDPROC(__gnu_thumb1_case_uhi)
.popsection
#endif