mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-27 21:53:25 +08:00
3fb22bc2f8
Some SoCs in the mpc83xx family, e.g. mpc8309, have a dedicated spi chip select, SPISEL_BOOT, that is used by the boot code to boot from flash. This chip select will typically be used to select a SPI boot flash. The SPISEL_BOOT signal is controlled by a single bit in the SPI_CS register. Implement a gpio driver for the spi chip select register. This allows a spi driver capable of using gpios as chip select, to bind a chip select to SPISEL_BOOT. It may be a little odd to do this as a GPIO driver, since the signal is neither GP or I, but it is quite convenient to present it to the spi driver that way. The alternative it to teach mpc8xxx_spi to handle the SPISEL_BOOT signal itself (that is how it's done in the linux kernel, see commit 69b921acae8a) Signed-off-by: Klaus H. Sorensen <khso@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
149 lines
3.4 KiB
C
149 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 DEIF A/S
|
|
*
|
|
* GPIO driver to set/clear SPISEL_BOOT pin on mpc83xx.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <mapmem.h>
|
|
#include <asm/gpio.h>
|
|
|
|
struct mpc83xx_spisel_boot {
|
|
u32 __iomem *spi_cs;
|
|
ulong addr;
|
|
uint gpio_count;
|
|
ulong type;
|
|
};
|
|
|
|
static u32 gpio_mask(uint gpio)
|
|
{
|
|
return (1U << (31 - (gpio)));
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_direction_input(struct udevice *dev, uint gpio)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_set_value(struct udevice *dev, uint gpio, int value)
|
|
{
|
|
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
|
|
|
|
debug("%s: gpio=%d, value=%u, gpio_mask=0x%08x\n", __func__,
|
|
gpio, value, gpio_mask(gpio));
|
|
|
|
if (value)
|
|
setbits_be32(data->spi_cs, gpio_mask(gpio));
|
|
else
|
|
clrbits_be32(data->spi_cs, gpio_mask(gpio));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_direction_output(struct udevice *dev, uint gpio, int value)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_get_value(struct udevice *dev, uint gpio)
|
|
{
|
|
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
|
|
|
|
return !!(in_be32(data->spi_cs) & gpio_mask(gpio));
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_get_function(struct udevice *dev, uint gpio)
|
|
{
|
|
return GPIOF_OUTPUT;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static int mpc83xx_spisel_boot_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
|
|
fdt_addr_t addr;
|
|
u32 reg[2];
|
|
|
|
dev_read_u32_array(dev, "reg", reg, 2);
|
|
addr = dev_translate_address(dev, reg);
|
|
|
|
plat->addr = addr;
|
|
plat->size = reg[1];
|
|
plat->ngpios = dev_read_u32_default(dev, "ngpios", 1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mpc83xx_spisel_boot_platdata_to_priv(struct udevice *dev)
|
|
{
|
|
struct mpc83xx_spisel_boot *priv = dev_get_priv(dev);
|
|
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
|
|
unsigned long size = plat->size;
|
|
ulong driver_data = dev_get_driver_data(dev);
|
|
|
|
if (size == 0)
|
|
size = 0x04;
|
|
|
|
priv->addr = plat->addr;
|
|
priv->spi_cs = map_sysmem(plat->addr, size);
|
|
|
|
if (!priv->spi_cs)
|
|
return -ENOMEM;
|
|
|
|
priv->gpio_count = plat->ngpios;
|
|
|
|
priv->type = driver_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc83xx_spisel_boot_probe(struct udevice *dev)
|
|
{
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
|
|
char name[32], *str;
|
|
|
|
mpc83xx_spisel_boot_platdata_to_priv(dev);
|
|
|
|
snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
|
|
str = strdup(name);
|
|
|
|
if (!str)
|
|
return -ENOMEM;
|
|
|
|
uc_priv->bank_name = str;
|
|
uc_priv->gpio_count = data->gpio_count;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops mpc83xx_spisel_boot_ops = {
|
|
.direction_input = mpc83xx_spisel_boot_direction_input,
|
|
.direction_output = mpc83xx_spisel_boot_direction_output,
|
|
.get_value = mpc83xx_spisel_boot_get_value,
|
|
.set_value = mpc83xx_spisel_boot_set_value,
|
|
.get_function = mpc83xx_spisel_boot_get_function,
|
|
};
|
|
|
|
static const struct udevice_id mpc83xx_spisel_boot_ids[] = {
|
|
{ .compatible = "fsl,mpc8309-spisel-boot" },
|
|
{ .compatible = "fsl,mpc83xx-spisel-boot" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(spisel_boot_mpc83xx) = {
|
|
.name = "spisel_boot_mpc83xx",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &mpc83xx_spisel_boot_ops,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.ofdata_to_platdata = mpc83xx_spisel_boot_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mpc8xxx_gpio_plat),
|
|
.of_match = mpc83xx_spisel_boot_ids,
|
|
#endif
|
|
.probe = mpc83xx_spisel_boot_probe,
|
|
.priv_auto_alloc_size = sizeof(struct mpc83xx_spisel_boot),
|
|
};
|