u-boot/drivers/gpio/stm32_gpio.c
Simon Glass 336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00

224 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <fdtdec.h>
#include <asm/arch/gpio.h>
#include <asm/arch/stm32.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/errno.h>
#include <linux/io.h>
#define MODE_BITS(gpio_pin) (gpio_pin * 2)
#define MODE_BITS_MASK 3
#define BSRR_BIT(gpio_pin, value) BIT(gpio_pin + (value ? 0 : 16))
#ifndef CONFIG_SPL_BUILD
/*
* convert gpio offset to gpio index taking into account gpio holes
* into gpio bank
*/
int stm32_offset_to_index(struct udevice *dev, unsigned int offset)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
unsigned int idx = 0;
int i;
for (i = 0; i < STM32_GPIOS_PER_BANK; i++) {
if (priv->gpio_range & BIT(i)) {
if (idx == offset)
return idx;
idx++;
}
}
/* shouldn't happen */
return -EINVAL;
}
static int stm32_gpio_direction_input(struct udevice *dev, unsigned offset)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
int bits_index;
int mask;
int idx;
idx = stm32_offset_to_index(dev, offset);
if (idx < 0)
return idx;
bits_index = MODE_BITS(idx);
mask = MODE_BITS_MASK << bits_index;
clrsetbits_le32(&regs->moder, mask, STM32_GPIO_MODE_IN << bits_index);
return 0;
}
static int stm32_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
int bits_index;
int mask;
int idx;
idx = stm32_offset_to_index(dev, offset);
if (idx < 0)
return idx;
bits_index = MODE_BITS(idx);
mask = MODE_BITS_MASK << bits_index;
clrsetbits_le32(&regs->moder, mask, STM32_GPIO_MODE_OUT << bits_index);
writel(BSRR_BIT(idx, value), &regs->bsrr);
return 0;
}
static int stm32_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
int idx;
idx = stm32_offset_to_index(dev, offset);
if (idx < 0)
return idx;
return readl(&regs->idr) & BIT(idx) ? 1 : 0;
}
static int stm32_gpio_set_value(struct udevice *dev, unsigned offset, int value)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
int idx;
idx = stm32_offset_to_index(dev, offset);
if (idx < 0)
return idx;
writel(BSRR_BIT(idx, value), &regs->bsrr);
return 0;
}
static int stm32_gpio_get_function(struct udevice *dev, unsigned int offset)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
int bits_index;
int mask;
int idx;
u32 mode;
idx = stm32_offset_to_index(dev, offset);
if (idx < 0)
return idx;
bits_index = MODE_BITS(idx);
mask = MODE_BITS_MASK << bits_index;
mode = (readl(&regs->moder) & mask) >> bits_index;
if (mode == STM32_GPIO_MODE_OUT)
return GPIOF_OUTPUT;
if (mode == STM32_GPIO_MODE_IN)
return GPIOF_INPUT;
if (mode == STM32_GPIO_MODE_AN)
return GPIOF_UNUSED;
return GPIOF_FUNC;
}
static const struct dm_gpio_ops gpio_stm32_ops = {
.direction_input = stm32_gpio_direction_input,
.direction_output = stm32_gpio_direction_output,
.get_value = stm32_gpio_get_value,
.set_value = stm32_gpio_set_value,
.get_function = stm32_gpio_get_function,
};
#endif
static int gpio_stm32_probe(struct udevice *dev)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct clk clk;
fdt_addr_t addr;
int ret;
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
priv->regs = (struct stm32_gpio_regs *)addr;
#ifndef CONFIG_SPL_BUILD
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct ofnode_phandle_args args;
const char *name;
int i;
name = dev_read_string(dev, "st,bank-name");
if (!name)
return -EINVAL;
uc_priv->bank_name = name;
i = 0;
ret = dev_read_phandle_with_args(dev, "gpio-ranges",
NULL, 3, i, &args);
if (ret == -ENOENT) {
uc_priv->gpio_count = STM32_GPIOS_PER_BANK;
priv->gpio_range = GENMASK(STM32_GPIOS_PER_BANK - 1, 0);
}
while (ret != -ENOENT) {
priv->gpio_range |= GENMASK(args.args[2] + args.args[0] - 1,
args.args[0]);
uc_priv->gpio_count += args.args[2];
ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3,
++i, &args);
}
dev_dbg(dev, "addr = 0x%p bank_name = %s gpio_count = %d gpio_range = 0x%x\n",
(u32 *)priv->regs, uc_priv->bank_name, uc_priv->gpio_count,
priv->gpio_range);
#endif
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
ret = clk_enable(&clk);
if (ret) {
dev_err(dev, "failed to enable clock\n");
return ret;
}
debug("clock enabled for device %s\n", dev->name);
return 0;
}
U_BOOT_DRIVER(gpio_stm32) = {
.name = "gpio_stm32",
.id = UCLASS_GPIO,
.probe = gpio_stm32_probe,
#ifndef CONFIG_SPL_BUILD
.ops = &gpio_stm32_ops,
#endif
.flags = DM_UC_FLAG_SEQ_ALIAS,
.priv_auto_alloc_size = sizeof(struct stm32_gpio_priv),
};