u-boot/drivers/gpio/intel_ich6_gpio.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

241 lines
6.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2012 The Chromium OS Authors.
*/
/*
* This is a GPIO driver for Intel ICH6 and later. The x86 GPIOs are accessed
* through the PCI bus. Each PCI device has 256 bytes of configuration space,
* consisting of a standard header and a device-specific set of registers. PCI
* bus 0, device 31, function 0 gives us access to the chipset GPIOs (among
* other things). Within the PCI configuration space, the GPIOBASE register
* tells us where in the device's I/O region we can find more registers to
* actually access the GPIOs.
*
* PCI bus/device/function 0:1f:0 => PCI config registers
* PCI config register "GPIOBASE"
* PCI I/O space + [GPIOBASE] => start of GPIO registers
* GPIO registers => gpio pin function, direction, value
*
*
* Danger Will Robinson! Bank 0 (GPIOs 0-31) seems to be fairly stable. Most
* ICH versions have more, but the decoding the matrix that describes them is
* absurdly complex and constantly changing. We'll provide Bank 1 and Bank 2,
* but they will ONLY work for certain unspecified chipsets because the offset
* from GPIOBASE changes randomly. Even then, many GPIOs are unimplemented or
* reserved or subject to arcane restrictions.
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <pch.h>
#include <pci.h>
#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/pci.h>
DECLARE_GLOBAL_DATA_PTR;
#define GPIO_PER_BANK 32
struct ich6_bank_priv {
/* These are I/O addresses */
uint16_t use_sel;
uint16_t io_sel;
uint16_t lvl;
u32 lvl_write_cache;
bool use_lvl_write_cache;
};
#define GPIO_USESEL_OFFSET(x) (x)
#define GPIO_IOSEL_OFFSET(x) (x + 4)
#define GPIO_LVL_OFFSET(x) (x + 8)
static int _ich6_gpio_set_value(struct ich6_bank_priv *bank, unsigned offset,
int value)
{
u32 val;
if (bank->use_lvl_write_cache)
val = bank->lvl_write_cache;
else
val = inl(bank->lvl);
if (value)
val |= (1UL << offset);
else
val &= ~(1UL << offset);
outl(val, bank->lvl);
if (bank->use_lvl_write_cache)
bank->lvl_write_cache = val;
return 0;
}
static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
{
u32 val;
if (!dir) {
val = inl(base);
val |= (1UL << offset);
outl(val, base);
} else {
val = inl(base);
val &= ~(1UL << offset);
outl(val, base);
}
return 0;
}
static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
u32 gpiobase;
int offset;
int ret;
ret = pch_get_gpio_base(dev->parent, &gpiobase);
if (ret)
return ret;
offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "reg", -1);
if (offset == -1) {
debug("%s: Invalid register offset %d\n", __func__, offset);
return -EINVAL;
}
plat->offset = offset;
plat->base_addr = gpiobase + offset;
plat->bank_name = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
"bank-name", NULL);
return 0;
}
static int ich6_gpio_probe(struct udevice *dev)
{
struct ich6_bank_platdata *plat = dev_get_platdata(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct ich6_bank_priv *bank = dev_get_priv(dev);
const void *prop;
uc_priv->gpio_count = GPIO_PER_BANK;
uc_priv->bank_name = plat->bank_name;
bank->use_sel = plat->base_addr;
bank->io_sel = plat->base_addr + 4;
bank->lvl = plat->base_addr + 8;
prop = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
"use-lvl-write-cache", NULL);
if (prop)
bank->use_lvl_write_cache = true;
else
bank->use_lvl_write_cache = false;
bank->lvl_write_cache = 0;
return 0;
}
static int ich6_gpio_request(struct udevice *dev, unsigned offset,
const char *label)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
/*
* Make sure that the GPIO pin we want isn't already in use for some
* built-in hardware function. We have to check this for every
* requested pin.
*/
tmplong = inl(bank->use_sel);
if (!(tmplong & (1UL << offset))) {
debug("%s: gpio %d is reserved for internal use\n", __func__,
offset);
return -EPERM;
}
return 0;
}
static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
return _ich6_gpio_set_direction(bank->io_sel, offset, 0);
}
static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
int ret;
struct ich6_bank_priv *bank = dev_get_priv(dev);
ret = _ich6_gpio_set_direction(bank->io_sel, offset, 1);
if (ret)
return ret;
return _ich6_gpio_set_value(bank, offset, value);
}
static int ich6_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
int r;
tmplong = inl(bank->lvl);
if (bank->use_lvl_write_cache)
tmplong |= bank->lvl_write_cache;
r = (tmplong & (1UL << offset)) ? 1 : 0;
return r;
}
static int ich6_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
return _ich6_gpio_set_value(bank, offset, value);
}
static int ich6_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 mask = 1UL << offset;
if (!(inl(bank->use_sel) & mask))
return GPIOF_FUNC;
if (inl(bank->io_sel) & mask)
return GPIOF_INPUT;
else
return GPIOF_OUTPUT;
}
static const struct dm_gpio_ops gpio_ich6_ops = {
.request = ich6_gpio_request,
.direction_input = ich6_gpio_direction_input,
.direction_output = ich6_gpio_direction_output,
.get_value = ich6_gpio_get_value,
.set_value = ich6_gpio_set_value,
.get_function = ich6_gpio_get_function,
};
static const struct udevice_id intel_ich6_gpio_ids[] = {
{ .compatible = "intel,ich6-gpio" },
{ }
};
U_BOOT_DRIVER(gpio_ich6) = {
.name = "gpio_ich6",
.id = UCLASS_GPIO,
.of_match = intel_ich6_gpio_ids,
.ops = &gpio_ich6_ops,
.ofdata_to_platdata = gpio_ich6_ofdata_to_platdata,
.probe = ich6_gpio_probe,
.priv_auto_alloc_size = sizeof(struct ich6_bank_priv),
.platdata_auto_alloc_size = sizeof(struct ich6_bank_platdata),
};