mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-05 10:33:42 +08:00
949eb228f3
Make sure to (if applicable) flush the D-cache, invalidate I-cache, and disable MMU and caches before jumping to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
817 lines
24 KiB
C
817 lines
24 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2012
|
|
* Texas Instruments, <www.ti.com>
|
|
*/
|
|
#ifndef _SPL_H_
|
|
#define _SPL_H_
|
|
|
|
#include <binman_sym.h>
|
|
#include <linker_lists.h>
|
|
|
|
/* Platform-specific defines */
|
|
#include <linux/compiler.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/spl.h>
|
|
#include <handoff.h>
|
|
|
|
struct blk_desc;
|
|
struct image_header;
|
|
|
|
/* Value in r0 indicates we booted from U-Boot */
|
|
#define UBOOT_NOT_LOADED_FROM_SPL 0x13578642
|
|
|
|
/* Boot type */
|
|
#define MMCSD_MODE_UNDEFINED 0
|
|
#define MMCSD_MODE_RAW 1
|
|
#define MMCSD_MODE_FS 2
|
|
#define MMCSD_MODE_EMMCBOOT 3
|
|
|
|
struct blk_desc;
|
|
struct image_header;
|
|
|
|
/*
|
|
* u_boot_first_phase() - check if this is the first U-Boot phase
|
|
*
|
|
* U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the
|
|
* build flags we can determine whether the current build is for the first
|
|
* phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If
|
|
* there is SPL but no TPL, the the first phase is SPL. If there is TPL, then
|
|
* it is the first phase.
|
|
*
|
|
* @returns true if this is the first phase of U-Boot
|
|
*
|
|
*/
|
|
static inline bool u_boot_first_phase(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_TPL)) {
|
|
if (IS_ENABLED(CONFIG_TPL_BUILD))
|
|
return true;
|
|
} else if (IS_ENABLED(CONFIG_SPL)) {
|
|
if (IS_ENABLED(CONFIG_SPL_BUILD))
|
|
return true;
|
|
} else {
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
enum u_boot_phase {
|
|
PHASE_NONE, /* Invalid phase, signifying before U-Boot */
|
|
PHASE_TPL, /* Running in TPL */
|
|
PHASE_SPL, /* Running in SPL */
|
|
PHASE_BOARD_F, /* Running in U-Boot before relocation */
|
|
PHASE_BOARD_R, /* Running in U-Boot after relocation */
|
|
};
|
|
|
|
/**
|
|
* spl_phase() - Find out the phase of U-Boot
|
|
*
|
|
* This can be used to avoid #ifdef logic and use if() instead.
|
|
*
|
|
* For example, to include code only in TPL, you might do:
|
|
*
|
|
* #ifdef CONFIG_TPL_BUILD
|
|
* ...
|
|
* #endif
|
|
*
|
|
* but with this you can use:
|
|
*
|
|
* if (spl_phase() == PHASE_TPL) {
|
|
* ...
|
|
* }
|
|
*
|
|
* To include code only in SPL, you might do:
|
|
*
|
|
* #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
|
|
* ...
|
|
* #endif
|
|
*
|
|
* but with this you can use:
|
|
*
|
|
* if (spl_phase() == PHASE_SPL) {
|
|
* ...
|
|
* }
|
|
*
|
|
* To include code only in U-Boot proper, you might do:
|
|
*
|
|
* #ifndef CONFIG_SPL_BUILD
|
|
* ...
|
|
* #endif
|
|
*
|
|
* but with this you can use:
|
|
*
|
|
* if (spl_phase() == PHASE_BOARD_F) {
|
|
* ...
|
|
* }
|
|
*
|
|
* @return U-Boot phase
|
|
*/
|
|
static inline enum u_boot_phase spl_phase(void)
|
|
{
|
|
#ifdef CONFIG_TPL_BUILD
|
|
return PHASE_TPL;
|
|
#elif CONFIG_SPL_BUILD
|
|
return PHASE_SPL;
|
|
#else
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
return PHASE_BOARD_F;
|
|
else
|
|
return PHASE_BOARD_R;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* spl_prev_phase() - Figure out the previous U-Boot phase
|
|
*
|
|
* @return the previous phase from this one, e.g. if called in SPL this returns
|
|
* PHASE_TPL, if TPL is enabled
|
|
*/
|
|
static inline enum u_boot_phase spl_prev_phase(void)
|
|
{
|
|
#ifdef CONFIG_TPL_BUILD
|
|
return PHASE_NONE;
|
|
#elif defined(CONFIG_SPL_BUILD)
|
|
return IS_ENABLED(CONFIG_TPL) ? PHASE_TPL : PHASE_NONE;
|
|
#else
|
|
return IS_ENABLED(CONFIG_SPL) ? PHASE_SPL : PHASE_NONE;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* spl_next_phase() - Figure out the next U-Boot phase
|
|
*
|
|
* @return the next phase from this one, e.g. if called in TPL this returns
|
|
* PHASE_SPL
|
|
*/
|
|
static inline enum u_boot_phase spl_next_phase(void)
|
|
{
|
|
#ifdef CONFIG_TPL_BUILD
|
|
return PHASE_SPL;
|
|
#else
|
|
return PHASE_BOARD_F;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* spl_phase_name() - Get the name of the current phase
|
|
*
|
|
* @return phase name
|
|
*/
|
|
static inline const char *spl_phase_name(enum u_boot_phase phase)
|
|
{
|
|
switch (phase) {
|
|
case PHASE_TPL:
|
|
return "TPL";
|
|
case PHASE_SPL:
|
|
return "SPL";
|
|
case PHASE_BOARD_F:
|
|
case PHASE_BOARD_R:
|
|
return "U-Boot";
|
|
default:
|
|
return "phase?";
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spl_phase_prefix() - Get the prefix of the current phase
|
|
*
|
|
* @phase: Phase to look up
|
|
* @return phase prefix ("spl", "tpl", etc.)
|
|
*/
|
|
static inline const char *spl_phase_prefix(enum u_boot_phase phase)
|
|
{
|
|
switch (phase) {
|
|
case PHASE_TPL:
|
|
return "tpl";
|
|
case PHASE_SPL:
|
|
return "spl";
|
|
case PHASE_BOARD_F:
|
|
case PHASE_BOARD_R:
|
|
return "";
|
|
default:
|
|
return "phase?";
|
|
}
|
|
}
|
|
|
|
/* A string name for SPL or TPL */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
# ifdef CONFIG_TPL_BUILD
|
|
# define SPL_TPL_NAME "TPL"
|
|
# else
|
|
# define SPL_TPL_NAME "SPL"
|
|
# endif
|
|
# define SPL_TPL_PROMPT SPL_TPL_NAME ": "
|
|
#else
|
|
# define SPL_TPL_NAME ""
|
|
# define SPL_TPL_PROMPT ""
|
|
#endif
|
|
|
|
struct spl_image_info {
|
|
const char *name;
|
|
u8 os;
|
|
uintptr_t load_addr;
|
|
uintptr_t entry_point;
|
|
#if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL)
|
|
void *fdt_addr;
|
|
#endif
|
|
u32 boot_device;
|
|
u32 offset;
|
|
u32 size;
|
|
u32 flags;
|
|
void *arg;
|
|
#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
|
|
ulong dcrc_data;
|
|
ulong dcrc_length;
|
|
ulong dcrc;
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* Information required to load data from a device
|
|
*
|
|
* @dev: Pointer to the device, e.g. struct mmc *
|
|
* @priv: Private data for the device
|
|
* @bl_len: Block length for reading in bytes
|
|
* @filename: Name of the fit image file.
|
|
* @read: Function to call to read from the device
|
|
*/
|
|
struct spl_load_info {
|
|
void *dev;
|
|
void *priv;
|
|
int bl_len;
|
|
const char *filename;
|
|
/**
|
|
* read() - Read from device
|
|
*
|
|
* @load: Information about the load state
|
|
* @sector: Sector number to read from (each @load->bl_len bytes)
|
|
* @count: Number of sectors to read
|
|
* @buf: Buffer to read into
|
|
* @return number of sectors read, 0 on error
|
|
*/
|
|
ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
|
|
void *buf);
|
|
};
|
|
|
|
/*
|
|
* We need to know the position of U-Boot in memory so we can jump to it. We
|
|
* allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin,
|
|
* u-boot.img), hence the '_any'. These is no checking here that the correct
|
|
* image is found. For example if u-boot.img is used we don't check that
|
|
* spl_parse_image_header() can parse a valid header.
|
|
*
|
|
* Similarly for SPL, so that TPL can jump to SPL.
|
|
*/
|
|
binman_sym_extern(ulong, u_boot_any, image_pos);
|
|
binman_sym_extern(ulong, u_boot_any, size);
|
|
binman_sym_extern(ulong, spl, image_pos);
|
|
binman_sym_extern(ulong, spl, size);
|
|
|
|
/**
|
|
* spl_get_image_pos() - get the image position of the next phase
|
|
*
|
|
* This returns the image position to use to load the next phase of U-Boot
|
|
*/
|
|
ulong spl_get_image_pos(void);
|
|
|
|
/**
|
|
* spl_get_image_size() - get the size of the next phase
|
|
*
|
|
* This returns the size to use to load the next phase of U-Boot
|
|
*/
|
|
ulong spl_get_image_size(void);
|
|
|
|
/**
|
|
* spl_get_image_text_base() - get the text base of the next phase
|
|
*
|
|
* This returns the address that the next stage is linked to run at, i.e.
|
|
* CONFIG_SPL_TEXT_BASE or CONFIG_SYS_TEXT_BASE
|
|
*
|
|
* @return text-base address
|
|
*/
|
|
ulong spl_get_image_text_base(void);
|
|
|
|
/**
|
|
* spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
|
|
* image processing during spl_load_simple_fit().
|
|
*
|
|
* Return true to skip FIT processing, false to preserve the full code flow
|
|
* of spl_load_simple_fit().
|
|
*/
|
|
bool spl_load_simple_fit_skip_processing(void);
|
|
|
|
/**
|
|
* spl_load_simple_fit_fix_load() - Hook to make fixes
|
|
* after fit image header is loaded
|
|
*
|
|
* Returns pointer to fit
|
|
*/
|
|
void *spl_load_simple_fit_fix_load(const void *fit);
|
|
|
|
/**
|
|
* spl_load_simple_fit() - Loads a fit image from a device.
|
|
* @spl_image: Image description to set up
|
|
* @info: Structure containing the information required to load data.
|
|
* @sector: Sector number where FIT image is located in the device
|
|
* @fdt: Pointer to the copied FIT header.
|
|
*
|
|
* Reads the FIT image @sector in the device. Loads u-boot image to
|
|
* specified load address and copies the dtb to end of u-boot image.
|
|
* Returns 0 on success.
|
|
*/
|
|
int spl_load_simple_fit(struct spl_image_info *spl_image,
|
|
struct spl_load_info *info, ulong sector, void *fdt);
|
|
|
|
#define SPL_COPY_PAYLOAD_ONLY 1
|
|
#define SPL_FIT_FOUND 2
|
|
|
|
/**
|
|
* spl_load_legacy_img() - Loads a legacy image from a device.
|
|
* @spl_image: Image description to set up
|
|
* @load: Structure containing the information required to load data.
|
|
* @header: Pointer to image header (including appended image)
|
|
*
|
|
* Reads an legacy image from the device. Loads u-boot image to
|
|
* specified load address.
|
|
* Returns 0 on success.
|
|
*/
|
|
int spl_load_legacy_img(struct spl_image_info *spl_image,
|
|
struct spl_load_info *load, ulong header);
|
|
|
|
/**
|
|
* spl_load_imx_container() - Loads a imx container image from a device.
|
|
* @spl_image: Image description to set up
|
|
* @info: Structure containing the information required to load data.
|
|
* @sector: Sector number where container image is located in the device
|
|
*
|
|
* Reads the container image @sector in the device. Loads u-boot image to
|
|
* specified load address.
|
|
*/
|
|
int spl_load_imx_container(struct spl_image_info *spl_image,
|
|
struct spl_load_info *info, ulong sector);
|
|
|
|
/* SPL common functions */
|
|
void preloader_console_init(void);
|
|
u32 spl_boot_device(void);
|
|
|
|
/**
|
|
* spl_mmc_boot_mode() - Lookup function for the mode of an MMC boot source.
|
|
* @boot_device: ID of the device which the MMC driver wants to read
|
|
* from. Common values are e.g. BOOT_DEVICE_MMC1,
|
|
* BOOT_DEVICE_MMC2, BOOT_DEVICE_MMC2_2.
|
|
*
|
|
* This function should return one of MMCSD_MODE_FS, MMCSD_MODE_EMMCBOOT, or
|
|
* MMCSD_MODE_RAW for each MMC boot source which is defined for the target. The
|
|
* boot_device parameter tells which device the MMC driver is interested in.
|
|
*
|
|
* If not overridden, it is weakly defined in common/spl/spl_mmc.c.
|
|
*
|
|
* Note: It is important to use the boot_device parameter instead of e.g.
|
|
* spl_boot_device() as U-Boot is not always loaded from the same device as SPL.
|
|
*/
|
|
u32 spl_mmc_boot_mode(const u32 boot_device);
|
|
|
|
/**
|
|
* spl_mmc_boot_partition() - MMC partition to load U-Boot from.
|
|
* @boot_device: ID of the device which the MMC driver wants to load
|
|
* U-Boot from.
|
|
*
|
|
* This function should return the partition number which the SPL
|
|
* should load U-Boot from (on the given boot_device) when
|
|
* CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is set.
|
|
*
|
|
* If not overridden, it is weakly defined in common/spl/spl_mmc.c.
|
|
*/
|
|
int spl_mmc_boot_partition(const u32 boot_device);
|
|
|
|
struct mmc;
|
|
/**
|
|
* default_spl_mmc_emmc_boot_partition() - eMMC boot partition to load U-Boot from.
|
|
* mmc: Pointer for the mmc device structure
|
|
*
|
|
* This function should return the eMMC boot partition number which
|
|
* the SPL should load U-Boot from (on the given boot_device).
|
|
*/
|
|
int default_spl_mmc_emmc_boot_partition(struct mmc *mmc);
|
|
|
|
/**
|
|
* spl_mmc_emmc_boot_partition() - eMMC boot partition to load U-Boot from.
|
|
* mmc: Pointer for the mmc device structure
|
|
*
|
|
* This function should return the eMMC boot partition number which
|
|
* the SPL should load U-Boot from (on the given boot_device).
|
|
*
|
|
* If not overridden, it is weakly defined in common/spl/spl_mmc.c
|
|
* and calls default_spl_mmc_emmc_boot_partition();
|
|
*/
|
|
int spl_mmc_emmc_boot_partition(struct mmc *mmc);
|
|
|
|
void spl_set_bd(void);
|
|
|
|
/**
|
|
* spl_set_header_raw_uboot() - Set up a standard SPL image structure
|
|
*
|
|
* This sets up the given spl_image which the standard values obtained from
|
|
* config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START,
|
|
* CONFIG_SYS_TEXT_BASE.
|
|
*
|
|
* @spl_image: Image description to set up
|
|
*/
|
|
void spl_set_header_raw_uboot(struct spl_image_info *spl_image);
|
|
|
|
/**
|
|
* spl_parse_image_header() - parse the image header and set up info
|
|
*
|
|
* This parses the legacy image header information at @header and sets up
|
|
* @spl_image according to what is found. If no image header is found, then
|
|
* a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is
|
|
* enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not
|
|
* enabled then U-Boot gives up. Otherwise U-Boot sets up the image using
|
|
* spl_set_header_raw_uboot(), or possibly the bootz header.
|
|
*
|
|
* @spl_image: Image description to set up
|
|
* @header image header to parse
|
|
* @return 0 if a header was correctly parsed, -ve on error
|
|
*/
|
|
int spl_parse_image_header(struct spl_image_info *spl_image,
|
|
const struct image_header *header);
|
|
|
|
void spl_board_prepare_for_linux(void);
|
|
|
|
/**
|
|
* spl_board_prepare_for_optee() - Prepare board for an OPTEE payload
|
|
*
|
|
* Prepares the board for booting an OP-TEE payload. Initialization is platform
|
|
* specific, and may include configuring the TrustZone memory, and other
|
|
* initialization steps required by OP-TEE.
|
|
* Note that @fdt is not used directly by OP-TEE. OP-TEE passes this @fdt to
|
|
* its normal world target. This target is not guaranteed to be u-boot, so @fdt
|
|
* changes that would normally be done by u-boot should be done in this step.
|
|
*
|
|
* @fdt: Devicetree that will be passed on, or NULL
|
|
*/
|
|
void spl_board_prepare_for_optee(void *fdt);
|
|
void spl_board_prepare_for_boot(void);
|
|
int spl_board_ubi_load_image(u32 boot_device);
|
|
int spl_board_boot_device(u32 boot_device);
|
|
|
|
/**
|
|
* jump_to_image_linux() - Jump to a Linux kernel from SPL
|
|
*
|
|
* This jumps into a Linux kernel using the information in @spl_image.
|
|
*
|
|
* @spl_image: Image description to set up
|
|
*/
|
|
void __noreturn jump_to_image_linux(struct spl_image_info *spl_image);
|
|
|
|
/**
|
|
* jump_to_image_linux() - Jump to OP-TEE OS from SPL
|
|
*
|
|
* This jumps into OP-TEE OS using the information in @spl_image.
|
|
*
|
|
* @spl_image: Image description to set up
|
|
*/
|
|
void __noreturn jump_to_image_optee(struct spl_image_info *spl_image);
|
|
|
|
/**
|
|
* spl_start_uboot() - Check if SPL should start the kernel or U-Boot
|
|
*
|
|
* This is called by the various SPL loaders to determine whether the board
|
|
* wants to load the kernel or U-Boot. This function should be provided by
|
|
* the board.
|
|
*
|
|
* @return 0 if SPL should start the kernel, 1 if U-Boot must be started
|
|
*/
|
|
int spl_start_uboot(void);
|
|
|
|
/**
|
|
* spl_display_print() - Display a board-specific message in SPL
|
|
*
|
|
* If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function
|
|
* immediately after displaying the SPL console banner ("U-Boot SPL ...").
|
|
* This function should be provided by the board.
|
|
*/
|
|
void spl_display_print(void);
|
|
|
|
/**
|
|
* struct spl_boot_device - Describes a boot device used by SPL
|
|
*
|
|
* @boot_device: A number indicating the BOOT_DEVICE type. There are various
|
|
* BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently
|
|
* numbered.
|
|
* @boot_device_name: Named boot device, or NULL if none.
|
|
*
|
|
* Note: Additional fields can be added here, bearing in mind that SPL is
|
|
* size-sensitive and common fields will be present on all boards. This
|
|
* struct can also be used to return additional information about the load
|
|
* process if that becomes useful.
|
|
*/
|
|
struct spl_boot_device {
|
|
uint boot_device;
|
|
const char *boot_device_name;
|
|
};
|
|
|
|
/**
|
|
* Holds information about a way of loading an SPL image
|
|
*
|
|
* @name: User-friendly name for this method (e.g. "MMC")
|
|
* @boot_device: Boot device that this loader supports
|
|
* @load_image: Function to call to load image
|
|
*/
|
|
struct spl_image_loader {
|
|
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
const char *name;
|
|
#endif
|
|
uint boot_device;
|
|
/**
|
|
* load_image() - Load an SPL image
|
|
*
|
|
* @spl_image: place to put image information
|
|
* @bootdev: describes the boot device to load from
|
|
*/
|
|
int (*load_image)(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev);
|
|
};
|
|
|
|
/* Helper function for accessing the name */
|
|
static inline const char *spl_loader_name(const struct spl_image_loader *loader)
|
|
{
|
|
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
return loader->name;
|
|
#else
|
|
return NULL;
|
|
#endif
|
|
}
|
|
|
|
/* Declare an SPL image loader */
|
|
#define SPL_LOAD_IMAGE(__name) \
|
|
ll_entry_declare(struct spl_image_loader, __name, spl_image_loader)
|
|
|
|
/*
|
|
* _priority is the priority of this method, 0 meaning it will be the top
|
|
* choice for this device, 9 meaning it is the bottom choice.
|
|
* _boot_device is the BOOT_DEVICE_... value
|
|
* _method is the load_image function to call
|
|
*/
|
|
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \
|
|
SPL_LOAD_IMAGE(_boot_device ## _priority ## _method) = { \
|
|
.name = _name, \
|
|
.boot_device = _boot_device, \
|
|
.load_image = _method, \
|
|
}
|
|
#else
|
|
#define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \
|
|
SPL_LOAD_IMAGE(_boot_device ## _priority ## _method) = { \
|
|
.boot_device = _boot_device, \
|
|
.load_image = _method, \
|
|
}
|
|
#endif
|
|
|
|
/* SPL FAT image functions */
|
|
int spl_load_image_fat(struct spl_image_info *spl_image,
|
|
struct blk_desc *block_dev, int partition,
|
|
const char *filename);
|
|
int spl_load_image_fat_os(struct spl_image_info *spl_image,
|
|
struct blk_desc *block_dev, int partition);
|
|
|
|
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);
|
|
|
|
/* SPL EXT image functions */
|
|
int spl_load_image_ext(struct spl_image_info *spl_image,
|
|
struct blk_desc *block_dev, int partition,
|
|
const char *filename);
|
|
int spl_load_image_ext_os(struct spl_image_info *spl_image,
|
|
struct blk_desc *block_dev, int partition);
|
|
|
|
/**
|
|
* spl_early_init() - Set up device tree and driver model in SPL if enabled
|
|
*
|
|
* Call this function in board_init_f() if you want to use device tree and
|
|
* driver model early, before board_init_r() is called.
|
|
*
|
|
* If this is not called, then driver model will be inactive in SPL's
|
|
* board_init_f(), and no device tree will be available.
|
|
*/
|
|
int spl_early_init(void);
|
|
|
|
/**
|
|
* spl_init() - Set up device tree and driver model in SPL if enabled
|
|
*
|
|
* You can optionally call spl_early_init(), then optionally call spl_init().
|
|
* This function will be called from board_init_r() if not called earlier.
|
|
*
|
|
* Both spl_early_init() and spl_init() perform a similar function except that
|
|
* the latter will not set up the malloc() area if
|
|
* CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is enabled, since it is assumed to
|
|
* already be done by a calll to spl_relocate_stack_gd() before board_init_r()
|
|
* is reached.
|
|
*
|
|
* This function will be called from board_init_r() if not called earlier.
|
|
*
|
|
* If this is not called, then driver model will be inactive in SPL's
|
|
* board_init_f(), and no device tree will be available.
|
|
*/
|
|
int spl_init(void);
|
|
|
|
#ifdef CONFIG_SPL_BOARD_INIT
|
|
void spl_board_init(void);
|
|
#endif
|
|
|
|
/**
|
|
* spl_was_boot_source() - check if U-Boot booted from SPL
|
|
*
|
|
* This will normally be true, but if U-Boot jumps to second U-Boot, it will
|
|
* be false. This should be implemented by board-specific code.
|
|
*
|
|
* @return true if U-Boot booted from SPL, else false
|
|
*/
|
|
bool spl_was_boot_source(void);
|
|
|
|
/**
|
|
* spl_dfu_cmd- run dfu command with chosen mmc device interface
|
|
* @param usb_index - usb controller number
|
|
* @param mmc_dev - mmc device nubmer
|
|
*
|
|
* @return 0 on success, otherwise error code
|
|
*/
|
|
int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
|
|
|
|
int spl_mmc_load_image(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev);
|
|
|
|
/**
|
|
* spl_mmc_load() - Load an image file from MMC/SD media
|
|
*
|
|
* @param spl_image Image data filled in by loading process
|
|
* @param bootdev Describes which device to load from
|
|
* @param filename Name of file to load (in FS mode)
|
|
* @param raw_part Partition to load from (in RAW mode)
|
|
* @param raw_sect Sector to load from (in RAW mode)
|
|
*
|
|
* @return 0 on success, otherwise error code
|
|
*/
|
|
int spl_mmc_load(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev,
|
|
const char *filename,
|
|
int raw_part,
|
|
unsigned long raw_sect);
|
|
|
|
/**
|
|
* spl_usb_load() - Load an image file from USB mass storage
|
|
*
|
|
* @param spl_image Image data filled in by loading process
|
|
* @param bootdev Describes which device to load from
|
|
* @param raw_part Fat partition to load from
|
|
* @param filename Name of file to load
|
|
*
|
|
* @return 0 on success, otherwise error code
|
|
*/
|
|
int spl_usb_load(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev,
|
|
int partition, const char *filename);
|
|
|
|
int spl_ymodem_load_image(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev);
|
|
|
|
/**
|
|
* spl_invoke_atf - boot using an ARM trusted firmware image
|
|
*/
|
|
void spl_invoke_atf(struct spl_image_info *spl_image);
|
|
|
|
/**
|
|
* bl2_plat_get_bl31_params() - return params for bl31.
|
|
* @bl32_entry: address of BL32 executable (secure)
|
|
* @bl33_entry: address of BL33 executable (non secure)
|
|
* @fdt_addr: address of Flat Device Tree
|
|
*
|
|
* This is a weak function which might be overridden by the board code. By
|
|
* default it will just call bl2_plat_get_bl31_params_default().
|
|
*
|
|
* If you just want to manipulate or add some parameters, you can override
|
|
* this function, call bl2_plat_get_bl31_params_default and operate on the
|
|
* returned bl31 params.
|
|
*
|
|
* Return: bl31 params structure pointer
|
|
*/
|
|
struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl32_entry,
|
|
uintptr_t bl33_entry,
|
|
uintptr_t fdt_addr);
|
|
|
|
/**
|
|
* bl2_plat_get_bl31_params_default() - prepare params for bl31.
|
|
* @bl32_entry: address of BL32 executable (secure)
|
|
* @bl33_entry: address of BL33 executable (non secure)
|
|
* @fdt_addr: address of Flat Device Tree
|
|
*
|
|
* This is the default implementation of bl2_plat_get_bl31_params(). It assigns
|
|
* a pointer to the memory that the platform has kept aside to pass platform
|
|
* specific and trusted firmware related information to BL31. This memory is
|
|
* allocated by allocating memory to bl2_to_bl31_params_mem structure which is
|
|
* a superset of all the structure whose information is passed to BL31
|
|
*
|
|
* NOTE: The memory is statically allocated, thus this function should be
|
|
* called only once. All subsequent calls will overwrite any changes.
|
|
*
|
|
* Return: bl31 params structure pointer
|
|
*/
|
|
struct bl31_params *bl2_plat_get_bl31_params_default(uintptr_t bl32_entry,
|
|
uintptr_t bl33_entry,
|
|
uintptr_t fdt_addr);
|
|
|
|
/**
|
|
* bl2_plat_get_bl31_params_v2() - return params for bl31
|
|
* @bl32_entry: address of BL32 executable (secure)
|
|
* @bl33_entry: address of BL33 executable (non secure)
|
|
* @fdt_addr: address of Flat Device Tree
|
|
*
|
|
* This function does the same as bl2_plat_get_bl31_params() except that is is
|
|
* used for the new LOAD_IMAGE_V2 option, which uses a slightly different
|
|
* method to pass the parameters.
|
|
*
|
|
* Return: bl31 params structure pointer
|
|
*/
|
|
struct bl_params *bl2_plat_get_bl31_params_v2(uintptr_t bl32_entry,
|
|
uintptr_t bl33_entry,
|
|
uintptr_t fdt_addr);
|
|
|
|
/**
|
|
* bl2_plat_get_bl31_params_v2_default() - prepare params for bl31.
|
|
* @bl32_entry: address of BL32 executable (secure)
|
|
* @bl33_entry: address of BL33 executable (non secure)
|
|
* @fdt_addr: address of Flat Device Tree
|
|
*
|
|
* This is the default implementation of bl2_plat_get_bl31_params_v2(). It
|
|
* prepares the linked list of the bl31 params, populates the image types and
|
|
* set the entry points for bl32 and bl33 (if available).
|
|
*
|
|
* NOTE: The memory is statically allocated, thus this function should be
|
|
* called only once. All subsequent calls will overwrite any changes.
|
|
*
|
|
* Return: bl31 params structure pointer
|
|
*/
|
|
struct bl_params *bl2_plat_get_bl31_params_v2_default(uintptr_t bl32_entry,
|
|
uintptr_t bl33_entry,
|
|
uintptr_t fdt_addr);
|
|
/**
|
|
* spl_optee_entry - entry function for optee
|
|
*
|
|
* args defind in op-tee project
|
|
* https://github.com/OP-TEE/optee_os/
|
|
* core/arch/arm/kernel/generic_entry_a32.S
|
|
* @arg0: pagestore
|
|
* @arg1: (ARMv7 standard bootarg #1)
|
|
* @arg2: device tree address, (ARMv7 standard bootarg #2)
|
|
* @arg3: non-secure entry address (ARMv7 bootarg #0)
|
|
*/
|
|
void __noreturn spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
|
|
|
|
/**
|
|
* spl_invoke_opensbi - boot using a RISC-V OpenSBI image
|
|
*/
|
|
void spl_invoke_opensbi(struct spl_image_info *spl_image);
|
|
|
|
/**
|
|
* board_return_to_bootrom - allow for boards to continue with the boot ROM
|
|
*
|
|
* If a board (e.g. the Rockchip RK3368 boards) provide some
|
|
* supporting functionality for SPL in their boot ROM and the SPL
|
|
* stage wants to return to the ROM code to continue booting, boards
|
|
* can implement 'board_return_to_bootrom'.
|
|
*/
|
|
int board_return_to_bootrom(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev);
|
|
|
|
/**
|
|
* board_spl_fit_post_load - allow process images after loading finished
|
|
* @fit: Pointer to a valid Flattened Image Tree blob
|
|
*/
|
|
void board_spl_fit_post_load(const void *fit);
|
|
|
|
/**
|
|
* board_spl_fit_size_align - specific size align before processing payload
|
|
*
|
|
*/
|
|
ulong board_spl_fit_size_align(ulong size);
|
|
|
|
/**
|
|
* spl_perform_fixups() - arch/board-specific callback before processing
|
|
* the boot-payload
|
|
*/
|
|
void spl_perform_fixups(struct spl_image_info *spl_image);
|
|
|
|
/*
|
|
* spl_get_load_buffer() - get buffer for loading partial image data
|
|
*
|
|
* Returns memory area which can be populated by partial image data,
|
|
* ie. uImage or fitImage header.
|
|
*/
|
|
struct image_header *spl_get_load_buffer(ssize_t offset, size_t size);
|
|
|
|
void spl_save_restore_data(void);
|
|
#endif
|