u-boot/board/imgtec/malta/lowlevel_init.S
Tom Rini aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00

232 lines
6.2 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
*/
#include <config.h>
#include <gt64120.h>
#include <msc01.h>
#include <pci.h>
#include <asm/addrspace.h>
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/malta.h>
#include <asm/mipsregs.h>
#ifdef CONFIG_SYS_BIG_ENDIAN
#define CPU_TO_GT32(_x) ((_x))
#else
#define CPU_TO_GT32(_x) ( \
(((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
(((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
#endif
.text
.set noreorder
.globl lowlevel_init
lowlevel_init:
/* detect the core card */
PTR_LI t0, CKSEG1ADDR(MALTA_REVISION)
lw t0, 0(t0)
srl t0, t0, MALTA_REVISION_CORID_SHF
andi t0, t0, (MALTA_REVISION_CORID_MSK >> \
MALTA_REVISION_CORID_SHF)
/* core cards using the gt64120 system controller */
li t1, MALTA_REVISION_CORID_CORE_LV
beq t0, t1, _gt64120
/* core cards using the MSC01 system controller */
li t1, MALTA_REVISION_CORID_CORE_FPGA6
beq t0, t1, _msc01
nop
/* unknown system controller */
b .
nop
/*
* Load BAR registers of GT64120 as done by YAMON
*
* based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
* to the barebox mailing list.
* The subject of the original patch:
* 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
* URL:
* http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
*
* based on write_bootloader() in qemu.git/hw/mips_malta.c
* see GT64120 manual and qemu.git/hw/gt64xxx.c for details
*/
_gt64120:
/* move GT64120 registers from 0x14000000 to 0x1be00000 */
PTR_LI t1, CKSEG1ADDR(GT_DEF_BASE)
li t0, CPU_TO_GT32(0xdf000000)
sw t0, GT_ISD_OFS(t1)
/* setup MEM-to-PCI0 mapping */
PTR_LI t1, CKSEG1ADDR(MALTA_GT_BASE)
/* setup PCI0 io window to 0x18000000-0x181fffff */
li t0, CPU_TO_GT32(0xc0000000)
sw t0, GT_PCI0IOLD_OFS(t1)
li t0, CPU_TO_GT32(0x40000000)
sw t0, GT_PCI0IOHD_OFS(t1)
/* setup PCI0 mem windows */
li t0, CPU_TO_GT32(0x80000000)
sw t0, GT_PCI0M0LD_OFS(t1)
li t0, CPU_TO_GT32(0x3f000000)
sw t0, GT_PCI0M0HD_OFS(t1)
li t0, CPU_TO_GT32(0xc1000000)
sw t0, GT_PCI0M1LD_OFS(t1)
li t0, CPU_TO_GT32(0x5e000000)
sw t0, GT_PCI0M1HD_OFS(t1)
jr ra
nop
/*
*
*/
_msc01:
/* setup peripheral bus controller clock divide */
PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_PBC_BASE)
li t1, 0x1 << MSC01_PBC_CLKCFG_SHF
sw t1, MSC01_PBC_CLKCFG_OFS(t0)
/* tweak peripheral bus controller timings */
li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \
(0x1 << MSC01_PBC_CS0TIM_CAT_SHF)
sw t1, MSC01_PBC_CS0TIM_OFS(t0)
li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \
(0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \
(0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \
(0x2 << MSC01_PBC_CS0RW_WAT_SHF)
sw t1, MSC01_PBC_CS0RW_OFS(t0)
lw t1, MSC01_PBC_CS0CFG_OFS(t0)
li t2, MSC01_PBC_CS0CFG_DTYP_MSK
and t1, t2
ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \
(0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \
(0x10 << MSC01_PBC_CS0CFG_WS_SHF)
sw t1, MSC01_PBC_CS0CFG_OFS(t0)
/* setup basic address decode */
PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_BIU_BASE)
li t1, 0x0
li t2, -CFG_SYS_SDRAM_SIZE
sw t1, MSC01_BIU_MCBAS1L_OFS(t0)
sw t2, MSC01_BIU_MCMSK1L_OFS(t0)
sw t1, MSC01_BIU_MCBAS2L_OFS(t0)
sw t2, MSC01_BIU_MCMSK2L_OFS(t0)
/* initialise IP1 - unused */
li t1, MALTA_MSC01_IP1_BASE
li t2, -MALTA_MSC01_IP1_SIZE
sw t1, MSC01_BIU_IP1BAS1L_OFS(t0)
sw t2, MSC01_BIU_IP1MSK1L_OFS(t0)
sw t1, MSC01_BIU_IP1BAS2L_OFS(t0)
sw t2, MSC01_BIU_IP1MSK2L_OFS(t0)
/* initialise IP2 - PCI */
li t1, MALTA_MSC01_IP2_BASE1
li t2, -MALTA_MSC01_IP2_SIZE1
sw t1, MSC01_BIU_IP2BAS1L_OFS(t0)
sw t2, MSC01_BIU_IP2MSK1L_OFS(t0)
li t1, MALTA_MSC01_IP2_BASE2
li t2, -MALTA_MSC01_IP2_SIZE2
sw t1, MSC01_BIU_IP2BAS2L_OFS(t0)
sw t2, MSC01_BIU_IP2MSK2L_OFS(t0)
/* initialise IP3 - peripheral bus controller */
li t1, MALTA_MSC01_IP3_BASE
li t2, -MALTA_MSC01_IP3_SIZE
sw t1, MSC01_BIU_IP3BAS1L_OFS(t0)
sw t2, MSC01_BIU_IP3MSK1L_OFS(t0)
sw t1, MSC01_BIU_IP3BAS2L_OFS(t0)
sw t2, MSC01_BIU_IP3MSK2L_OFS(t0)
/* setup PCI memory */
PTR_LI t0, CKSEG1ADDR(MALTA_MSC01_PCI_BASE)
li t1, MALTA_MSC01_PCIMEM_BASE
li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK
li t3, MALTA_MSC01_PCIMEM_MAP
sw t1, MSC01_PCI_SC2PMBASL_OFS(t0)
sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0)
sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0)
/* setup PCI I/O */
li t1, MALTA_MSC01_PCIIO_BASE
li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK
li t3, MALTA_MSC01_PCIIO_MAP
sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0)
sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0)
sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0)
/* setup PCI_BAR0 memory window */
li t1, -CFG_SYS_SDRAM_SIZE
sw t1, MSC01_PCI_BAR0_OFS(t0)
/* setup PCI to SysCon/CPU translation */
sw t1, MSC01_PCI_P2SCMSKL_OFS(t0)
sw zero, MSC01_PCI_P2SCMAPL_OFS(t0)
/* setup PCI vendor & device IDs */
li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \
(PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF)
sw t1, MSC01_PCI_HEAD0_OFS(t0)
/* setup PCI subsystem vendor & device IDs */
sw t1, MSC01_PCI_HEAD11_OFS(t0)
/* setup PCI class, revision */
li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \
(0x1 << MSC01_PCI_HEAD2_REV_SHF)
sw t1, MSC01_PCI_HEAD2_OFS(t0)
/* ensure a sane setup */
sw zero, MSC01_PCI_HEAD3_OFS(t0)
sw zero, MSC01_PCI_HEAD4_OFS(t0)
sw zero, MSC01_PCI_HEAD5_OFS(t0)
sw zero, MSC01_PCI_HEAD6_OFS(t0)
sw zero, MSC01_PCI_HEAD7_OFS(t0)
sw zero, MSC01_PCI_HEAD8_OFS(t0)
sw zero, MSC01_PCI_HEAD9_OFS(t0)
sw zero, MSC01_PCI_HEAD10_OFS(t0)
sw zero, MSC01_PCI_HEAD12_OFS(t0)
sw zero, MSC01_PCI_HEAD13_OFS(t0)
sw zero, MSC01_PCI_HEAD14_OFS(t0)
sw zero, MSC01_PCI_HEAD15_OFS(t0)
/* setup PCI command register */
li t1, (PCI_COMMAND_FAST_BACK | \
PCI_COMMAND_SERR | \
PCI_COMMAND_PARITY | \
PCI_COMMAND_MASTER | \
PCI_COMMAND_MEMORY)
sw t1, MSC01_PCI_HEAD1_OFS(t0)
/* setup PCI byte swapping */
#ifdef CONFIG_SYS_BIG_ENDIAN
li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \
(0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF)
sw t1, MSC01_PCI_SWAP_OFS(t0)
#else
sw zero, MSC01_PCI_SWAP_OFS(t0)
#endif
/* enable PCI host configuration cycles */
lw t1, MSC01_PCI_CFG_OFS(t0)
li t2, MSC01_PCI_CFG_RA_MSK | \
MSC01_PCI_CFG_G_MSK | \
MSC01_PCI_CFG_EN_MSK
or t1, t1, t2
sw t1, MSC01_PCI_CFG_OFS(t0)
jr ra
nop