u-boot/include/configs/rk3328_common.h
Klaus Goger 0c8e0b319f rockchip: add text_offset to kernel_addr_r on aarch64 platforms
Booting a aarch64 Linux kernel requires the image to be placed
text_offset bytes from a 2MB aligned address.
See https://www.kernel.org/doc/Documentation/arm64/booting.txt

booti_setup() takes care about this alignment and will relocate the
image if not properly aligned with memmove(). This can require up
to double the size of the loaded image and therefore accidentally
overwrite content placed there (i.e ramdisk_addr_r) for large kernel
images.

By adding text_offset to the default kernel_addr_r we can prevent that
from happening for kernels larger 18MB and also save a few cycles.

We can assume a text_offset of 0x80000 for most cases, all others will be
handled by booti_setup() anyway.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13 18:12:35 +01:00

61 lines
1.3 KiB
C

/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3328_COMMON_H
#define __CONFIG_RK3328_COMMON_H
#include "rockchip-common.h"
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_MAX_SIZE 0xff000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00500000\0" \
"pxefile_addr_r=0x00600000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02080000\0" \
"ramdisk_addr_r=0x04000000\0"
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"partitions=" PARTS_DEFAULT \
BOOTENV
#endif
/* rockchip ohci host driver */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#endif