u-boot/include/configs/odroid_xu3.h
Tom Rini 6828e602b7 dfu: Migrate to Kconfig
Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for
CMD_DFU (as we must have the DFU command enabled to do anything DFU).
Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add
options for all of the back end choices that DFU can make use of.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-27 10:46:45 -04:00

129 lines
3.5 KiB
C

/*
* Copyright (C) 2013 Samsung Electronics
* Hyungwon Hwang <human.hwang@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ODROID_XU3_H
#define __CONFIG_ODROID_XU3_H
#include "exynos5420-common.h"
#include <configs/exynos5-common.h>
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_BOARD_COMMON
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
/* select serial console configuration */
#define CONFIG_SERIAL2 /* use SERIAL 2 */
#define TZPC_BASE_OFFSET 0x10000
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
/* Reserve the last 22 MiB for the secure firmware */
#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
#define CONFIG_ENV_IS_IN_MMC
#undef CONFIG_ENV_SIZE
#undef CONFIG_ENV_OFFSET
#define CONFIG_ENV_SIZE (SZ_1K * 16)
#define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
/* DFU */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define DFU_MANIFEST_POLL_TIMEOUT 25000
/* THOR */
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_CMD_THOR_DOWNLOAD
/* UMS */
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
#undef CONFIG_EXYNOS_TMU
#undef CONFIG_TMU_CMD_DTT
#define CONFIG_DFU_ALT_SYSTEM \
"uImage fat 0 1;" \
"zImage fat 0 1;" \
"Image.itb fat 0 1;" \
"uInitrd fat 0 1;" \
"boot.scr fat 0 1;" \
"boot.cmd fat 0 1;" \
"exynos5422-odroidxu3.dtb fat 0 1;" \
"exynos5422-odroidxu3-lite.dtb fat 0 1;" \
"exynos5422-odroidxu4.dtb fat 0 1;" \
"boot part 0 1;" \
"root part 0 2\0"
#define CONFIG_DFU_ALT_BOOT_EMMC \
"u-boot raw 0x3e 0x800 mmcpart 1;" \
"bl1 raw 0x0 0x1e mmcpart 1;" \
"bl2 raw 0x1e 0x1d mmcpart 1;" \
"tzsw raw 0x83e 0x200 mmcpart 1;" \
"params.bin raw 0x1880 0x20\0"
#define CONFIG_DFU_ALT_BOOT_SD \
"u-boot raw 0x3f 0x800;" \
"bl1 raw 0x1 0x1e;" \
"bl2 raw 0x1f 0x1d;" \
"tzsw raw 0x83f 0x200;" \
"params.bin raw 0x1880 0x20\0"
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
#define CONFIG_MISC_COMMON
#define CONFIG_MISC_INIT_R
#define CONFIG_SET_DFU_ALT_INFO
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ODROID_REV_AIN 9
#define CONFIG_REVISION_TAG
#define CONFIG_BOARD_TYPES
#undef CONFIG_SYS_BOARD
#define CONFIG_SYS_BOARD "odroid"
/* Define new extra env settings, including DFU settings */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS \
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
"bootdelay=0\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"fdtfile=exynos5422-odroidxu3.dtb\0" \
"boardname=odroidxu3\0" \
"mmcbootdev=0\0" \
"mmcrootdev=0\0" \
"mmcbootpart=1\0" \
"mmcrootpart=2\0" \
"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
"dfu_alt_info=Autoset by THOR/DFU command run.\0"
#endif /* __CONFIG_H */