mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 20:54:24 +08:00
cdbb0cf8ec
Generic board support assumes a different method of specifying DRAM size on board, also it can be shared among all boards, notably only sh7763rdp board has a custom legacy dram_init(), however the difference is only in printing some additional information, this feature can be removed. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
139 lines
6.4 KiB
C
139 lines
6.4 KiB
C
/*
|
|
* Copyright (C) 2008
|
|
* Mark Jonas <mark.jonas@de.bosch.com>
|
|
*
|
|
* board/mpr2/mpr2.c
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("BOARD: MPR2\n");
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/*
|
|
* For MPR2 A.3 through A.7
|
|
*/
|
|
|
|
/* CS2: Ethernet (0xA8000000 - 0xABFFFFFF) */
|
|
__raw_writel(0x36db0400, CS2BCR); /* 4 idle cycles, normal space, 16 bit data bus */
|
|
__raw_writel(0x000003c0, CS2WCR); /* (WR:8), no ext. wait */
|
|
|
|
/* CS4: CAN1 (0xB0000000 - 0xB3FFFFFF) */
|
|
__raw_writel(0x00000200, CS4BCR); /* no idle cycles, normal space, 8 bit data bus */
|
|
__raw_writel(0x00100981, CS4WCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
|
|
|
|
/* CS5a: CAN2 (0xB4000000 - 0xB5FFFFFF) */
|
|
__raw_writel(0x00000200, CS5ABCR); /* no idle cycles, normal space, 8 bit data bus */
|
|
__raw_writel(0x00100981, CS5AWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
|
|
|
|
/* CS5b: CAN3 (0xB6000000 - 0xB7FFFFFF) */
|
|
__raw_writel(0x00000200, CS5BBCR); /* no idle cycles, normal space, 8 bit data bus */
|
|
__raw_writel(0x00100981, CS5BWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */
|
|
|
|
/* CS6a: Rotary (0xB8000000 - 0xB9FFFFFF) */
|
|
__raw_writel(0x00000200, CS6ABCR); /* no idle cycles, normal space, 8 bit data bus */
|
|
__raw_writel(0x001009C1, CS6AWCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
|
|
|
|
/* set Pin Select Register A: /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */
|
|
__raw_writew(0xAABC, PSELA); /* 10 10 10 10 10 11 11 00 */
|
|
|
|
/* set Pin Select Register B: /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */
|
|
__raw_writew(0x3C00, PSELB); /* 0 0 11 11 0 0 00000000 */
|
|
|
|
/* set Pin Select Register C: SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */
|
|
__raw_writew(0x0000, PSELC); /* 00 00 00 00 00000000 */
|
|
|
|
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */
|
|
__raw_writew(0x0000, PSELD); /* 0 00 00 00 00 00 00 00 0 */
|
|
|
|
/* OTH: (00) Other fuction
|
|
* GPO: (01) General Purpose Output
|
|
* GPI: (11) General Purpose Input
|
|
* GPI+: (10) General Purpose Input with internal pull-up
|
|
*-------------------------------------------------------
|
|
* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
|
|
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */
|
|
__raw_writew(0x5555, PACR); /* 01 01 01 01 01 01 01 01 */
|
|
|
|
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
|
|
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */
|
|
__raw_writew(0x5555, PBCR); /* 01 01 01 01 01 01 01 01 */
|
|
|
|
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
|
|
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */
|
|
__raw_writew(0x5500, PCCR); /* 01 01 01 01 00 00 00 00 */
|
|
|
|
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
|
|
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */
|
|
__raw_writew(0x5555, PDCR); /* 01 01 01 01 01 01 01 01 */
|
|
|
|
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
|
|
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */
|
|
__raw_writew(0x2800, PECR); /* 00 10 10 00 00 00 00 00 */
|
|
|
|
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
|
|
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */
|
|
__raw_writew(0x0002, PFCR); /* 00 00 00 00 00 00 00 10 */
|
|
|
|
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ);G4 GPI(KEY2);
|
|
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */
|
|
__raw_writew(0x03D5, PGCR); /* 00 00 00 11 11 01 01 01 */
|
|
|
|
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
|
|
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */
|
|
__raw_writew(0x0050, PHCR); /* 00 00 00 00 01 01 00 00 */
|
|
|
|
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
|
|
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */
|
|
__raw_writew(0x0000, PJCR); /* 00 00 00 00 00 00 00 00 */
|
|
|
|
/* K7 (x); K6 (x); K5 (x); K4 (x)
|
|
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nc); K0 PINT4(FLASH_READY); */
|
|
__raw_writew(0x00FB, PKCR); /* 00 00 00 00 11 11 10 11 */
|
|
|
|
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
|
|
* L3 TCK; L2 (x); L1 (x); L0 (x); */
|
|
__raw_writew(0x0000, PLCR); /* 00 00 00 00 00 00 00 00 */
|
|
|
|
/* M7 GPO(CURRENT_SINK);M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); M4 GPO(LAN_RESET);
|
|
* M3 GPO(BUZZER); M2 GPO(LCD_BL); M1 CS5B(CAN3_CS); M0 GPI+(nc); */
|
|
__raw_writew(0x5552, PMCR); /* 01 01 01 01 01 01 00 10 */
|
|
__raw_writeb(0xF0, PMDR); /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, LAN_RESET=off, BUZZER=off, LCD_BL=off */
|
|
|
|
/* P7 (x); P6 (x); P5 (x); P4 GPO(on pullup);
|
|
* P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ); */
|
|
__raw_writew(0x0100, PPCR); /* 00 00 00 01 00 00 00 00 */
|
|
__raw_writeb(0x10, PPDR); /* no current flow through pullup */
|
|
|
|
/* R7 A25; R6 A24; R5 A23; R4 A22;
|
|
* R3 A21; R2 A20; R1 A19; R0 A0; */
|
|
__raw_writew(0x0000, PRCR); /* 00 00 00 00 00 00 00 00 */
|
|
|
|
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
|
|
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */
|
|
__raw_writew(0x0140, PSCR); /* 00 00 00 01 01 00 00 00 */
|
|
|
|
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
|
|
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG); */
|
|
__raw_writew(0x0001, PTCR); /* 00 00 00 00 00 00 00 01 */
|
|
|
|
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
|
|
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */
|
|
__raw_writew(0x0240, PUCR); /* 00 00 00 10 01 00 00 00 */
|
|
|
|
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
|
|
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */
|
|
__raw_writew(0x0142, PVCR); /* 00 00 00 01 01 00 00 10 */
|
|
|
|
return 0;
|
|
}
|