u-boot

mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 12:44:23 +08:00

History

Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>		2021-02-02 15:33:42 -05:00
..
imximage.cfg	arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB	2020-06-26 10:29:06 -04:00
Kconfig
MAINTAINERS	meerkat96: fix typo in MAINTAINERS email address	2020-01-25 12:04:36 -05:00
Makefile
meerkat96.c	common: Drop asm/global_data.h from common header	2021-02-02 15:33:42 -05:00
README

README

* Build U-Boot for Meerkat96 board

  $ make mrproper
  $ make meerkat96_defconfig
  $ make

  It will generate the U-Boot binary called u-boot-dtb.imx

* Install U-Boot to MicroSD card

  Plug MicroSD card to a Linux machine (with card reader), find the
  device name and replace sd[x] with the name in the following command.

  $ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=512 seek=2

  It will install U-Boot to MicroSD card at 1KiB offset.  Insert the
  card to Meerkat96 MicroSD slot, power up the board, and U-Boot should
  boot from the card.