u-boot/configs/ad401_defconfig
Igor Prusov 1f0d2e870d board: amlogic: add support for AD401 board
The AD401 board is the Amlogic A1 SoC reference board

Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-6-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-28 10:05:34 +02:00

55 lines
1.2 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_TEXT_BASE=0x00000000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00200000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="meson-a1-ad401"
CONFIG_SYS_PROMPT="ad401 # "
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_MESON_A1=y
CONFIG_DEBUG_UART_BASE=0xfe001c00
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_DEBUG_UART=y
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run storeboot"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_ADC=y
CONFIG_SARADC_MESON=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MESON=y
CONFIG_LED=y
CONFIG_MISC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_PWM=y
CONFIG_PWM_MESON=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_WDT=y