u-boot/configs/pic32mzdask_defconfig
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

59 lines
1.4 KiB
Plaintext

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x9D004000
CONFIG_SYS_MALLOC_LEN=0x40000
CONFIG_SYS_MALLOC_F_LEN=0x600
CONFIG_ENV_SIZE=0x4000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
CONFIG_SYS_LOAD_ADDR=0x88500000
CONFIG_MACH_PIC32=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_SYS_MEMTEST_START=0x88000000
CONFIG_SYS_MEMTEST_END=0x88080000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007ffff
CONFIG_TIMESTAMP=y
CONFIG_BOOTDELAY=5
CONFIG_BOOTCOMMAND="run distro_bootcmd || run legacy_bootcmd"
CONFIG_SYS_MALLOC_BOOTPARAMS=y
CONFIG_SYS_BOOTPARAMS_LEN=0x1000
CONFIG_SYS_PROMPT="dask # "
CONFIG_SYS_PBSIZE=1048
# CONFIG_CMD_SAVEENV is not set
CONFIG_LOOPW=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_RARP=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ARP_TIMEOUT=500
CONFIG_NET_RETRY_COUNT=20
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_CLK=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PIC32=y
CONFIG_PHY_SMSC=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_PIC32_ETH=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_PIC32=y
CONFIG_FAT_WRITE=y
CONFIG_CMD_DHRYSTONE=y