Maxime Ripard de9b1771c3 mmc: sunxi: Support new mode ... Almost all of the newer Allwinner SoCs have a new operating mode for the eMMC clocks that needs to be enabled in both the clock and the MMC controller. Details about that mode are sparse, and the name itself (new mode vs old mode) doesn't give much details, but it seems that the it changes the sampling of the MMC clock. One side effect is also that it divides the parent clock rate by 2. Add support for it through a Kconfig option. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>		2017-08-28 22:36:44 +05:30
..
boot0.h	sunxi: A64: do an RMR switch if started in AArch32 mode	2017-01-04 16:37:42 +01:00
clock_sun4i.h	sunxi: Add missing macros to configure the NAND controller clk	2016-07-24 20:36:28 -05:00
clock_sun6i.h	sunxi: Add clock support for TV encoder	2017-05-15 21:22:57 +02:00
clock_sun8i_a83t.h	mmc: sunxi: Support new mode	2017-08-28 22:36:44 +05:30
clock_sun9i.h	sunxi: add initial clock setup for sun9i for SPL	2016-10-30 11:38:04 +01:00
clock.h	sunxi: Add support for Allwinner A64 SoCs	2016-04-01 09:52:28 +02:00
cpu_sun4i.h	sunxi: Add base address for TV encoder	2017-06-09 15:30:28 +02:00
cpu_sun9i.h	sunxi: Add support for SID e-fuses on sun9i	2016-10-30 11:38:04 +01:00
cpu.h	sunxi: Use H3/A64 DRAM initialization code for R40	2017-04-20 13:30:01 +02:00
cpucfg.h	sunxi: Add CPUCFG debug lock and sun7i cpu power controls	2016-06-20 22:44:00 +02:00
display2.h	sunxi: video: Add support for CSC and TVE to DE2 driver	2017-06-09 15:30:47 +02:00
display.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
dma_sun4i.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dma.h	sunxi: Add DMA definitions	2015-05-29 13:46:36 +02:00
dram_sun4i.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun6i.h	sun6i: Add dram initialization code	2014-11-13 14:49:01 +01:00
dram_sun8i_a23.h	sunxi: Make DRAM_ODT_EN Kconfig setting a bool	2015-05-19 18:46:44 +02:00
dram_sun8i_a33.h	sunxi: Add a33 dram init code	2015-05-04 16:51:51 +02:00
dram_sun8i_a83t.h	sunxi: Add support for LPDDR3 for A83T	2016-01-26 16:20:05 +01:00
dram_sun9i.h	sunxi: DRAM initialisation for sun9i	2016-10-30 11:38:04 +01:00
dram_sunxi_dw.h	sunxi: Add selective DRAM type and timing	2017-06-08 22:37:55 +05:30
dram.h	sunxi: makes an invisible option for H3-like DRAM controllers	2017-06-08 22:37:55 +05:30
gpio.h	sunxi: add basic V3s support	2017-04-21 09:23:17 +02:00
gtbus_sun9i.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
gtbus.h	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
i2c.h	sunxi: Add support for the I2C controller which is part of the PRCM	2016-01-21 07:30:01 +01:00
lcdc.h	sunxi: video: Convert lcdc to use struct display_timing	2017-04-20 13:34:52 +02:00
mmc.h	mmc: sunxi: Support new mode	2017-08-28 22:36:44 +05:30
p2wi.h	sun6i: Add new p2wi controller driver	2014-11-13 14:49:01 +01:00
pmic_bus.h	sunxi: axp: Move axp pmic register helpers to a separate file	2015-05-04 16:51:53 +02:00
prcm.h	sunxi: add PRCM secure switch register definition	2017-08-11 15:49:39 +05:30
pwm.h	sunxi: display: Use PWM to drive backlight where applicable	2016-08-26 16:58:37 +02:00
rsb.h	sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()	2015-02-02 13:55:14 +01:00
spl.h	sunxi: Store the device tree name in the SPL header	2017-05-17 23:23:58 +05:30
sys_proto.h	sunxi: Fix gmac not working due to cpu_eth_init no longer being called	2016-03-23 22:04:13 +01:00
timer.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00
tve.h	sunxi: video: Split out TVE code	2017-05-15 21:22:24 +02:00
tzpc.h	sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3	2016-01-26 16:20:04 +01:00
usb_phy.h	sunxi: musb: Power off OTG port VBUS when disabled	2016-09-17 14:37:40 +02:00
watchdog.h	sunxi: Fix watchdog reset function for R40	2017-04-20 13:30:00 +02:00