mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 05:04:23 +08:00
fbb0e15a42
This is most probably a typo, and in older u-uboot versions is same as 'saveenv', in the newer uboot versions there is a separate 'save' command that is different from 'saveenv'. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> |
||
|---|---|---|
| .. | ||
| develop-arm.txt | ||
| develop-common.txt | ||
| develop-ppc_8xx.txt | ||
| develop-ppc_82xx.txt | ||
| ramfs-arm.txt | ||
| ramfs-common.txt | ||
| ramfs-ppc_8xx.txt | ||
| ramfs-ppc_82xx.txt | ||
| README | ||
These scripts are needed for our development usecases. Copy this directory into your tftp root directory to be able to use this scripts. cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/ To load and configure these usecase, two environment variables in the u-boot default environment must be parsed: run develop : setup environment to configure for rootfs via nfs run ramfs : setup environment to configure for rootfs in ram Last change: 24.11.2011 develop-common.txt ============================ This file defines variables for working with rootfs via nfs for powerpc and arm. develop-<arch>.txt ============================ This file defines architecture specific variables for working with rootfs via nfs arm. ramfs-common.txt ============================ This file defines variables for working with rootfs inside the ram for powerpc and arm. ramfs-<arch>.txt ============================ This file defines architecture specific variables for working with rootfs inside ram.