u-boot/board/congatec/cgtqmx6eval/imximage.cfg
Nitin Garg 7972913512 imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board
Provide cgtqmx6eval board its own variant of ddr
setup config file. Move board/freescale/imx/ddr/
mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/
as this is was designed for the mx6sabresd board.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-09-22 16:09:56 +02:00

170 lines
4.0 KiB
INI

/*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
DATA 4 0x020e051c 0x00000030
DATA 4 0x020e0518 0x00000030
DATA 4 0x020e050c 0x00000030
DATA 4 0x020e05b8 0x00000030
DATA 4 0x020e05c0 0x00000030
DATA 4 0x020e05ac 0x00020030
DATA 4 0x020e05b4 0x00020030
DATA 4 0x020e0528 0x00020030
DATA 4 0x020e0520 0x00020030
DATA 4 0x020e0514 0x00020030
DATA 4 0x020e0510 0x00020030
DATA 4 0x020e05bc 0x00020030
DATA 4 0x020e05c4 0x00020030
DATA 4 0x020e056c 0x00020030
DATA 4 0x020e0578 0x00020030
DATA 4 0x020e0588 0x00020030
DATA 4 0x020e0594 0x00020030
DATA 4 0x020e057c 0x00020030
DATA 4 0x020e0590 0x00003000
DATA 4 0x020e0598 0x00003000
DATA 4 0x020e058c 0x00000000
DATA 4 0x020e059c 0x00003030
DATA 4 0x020e05a0 0x00003030
DATA 4 0x020e0784 0x00000030
DATA 4 0x020e0788 0x00000030
DATA 4 0x020e0794 0x00000030
DATA 4 0x020e079c 0x00000030
DATA 4 0x020e07a0 0x00000030
DATA 4 0x020e07a4 0x00000030
DATA 4 0x020e07a8 0x00000030
DATA 4 0x020e0748 0x00000030
DATA 4 0x020e074c 0x00000030
DATA 4 0x020e0750 0x00020000
DATA 4 0x020e0758 0x00000000
DATA 4 0x020e0774 0x00020000
DATA 4 0x020e078c 0x00000030
DATA 4 0x020e0798 0x000C0000
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
DATA 4 0x021b481c 0x33333333
DATA 4 0x021b4820 0x33333333
DATA 4 0x021b4824 0x33333333
DATA 4 0x021b4828 0x33333333
DATA 4 0x021b0018 0x00081740
DATA 4 0x021b001c 0x00008000
DATA 4 0x021b000c 0x555A7974
DATA 4 0x021b0010 0xDB538F64
DATA 4 0x021b0014 0x01FF00DB
DATA 4 0x021b002c 0x000026D2
DATA 4 0x021b0030 0x005A1023
DATA 4 0x021b0008 0x09444040
DATA 4 0x021b0004 0x00025576
DATA 4 0x021b0040 0x00000027
DATA 4 0x021b0000 0x831A0000
DATA 4 0x021b001c 0x04088032
DATA 4 0x021b001c 0x0408803A
DATA 4 0x021b001c 0x00008033
DATA 4 0x021b001c 0x0000803B
DATA 4 0x021b001c 0x00428031
DATA 4 0x021b001c 0x00428039
DATA 4 0x021b001c 0x19308030
DATA 4 0x021b001c 0x19308038
DATA 4 0x021b001c 0x04008040
DATA 4 0x021b001c 0x04008048
DATA 4 0x021b0800 0xA1380003
DATA 4 0x021b4800 0xA1380003
DATA 4 0x021b0020 0x00005800
DATA 4 0x021b0818 0x00022227
DATA 4 0x021b4818 0x00022227
DATA 4 0x021b083c 0x434B0350
DATA 4 0x021b0840 0x034C0359
DATA 4 0x021b483c 0x434B0350
DATA 4 0x021b4840 0x03650348
DATA 4 0x021b0848 0x4436383B
DATA 4 0x021b4848 0x39393341
DATA 4 0x021b0850 0x35373933
DATA 4 0x021b4850 0x48254A36
DATA 4 0x021b080c 0x001F001F
DATA 4 0x021b0810 0x001F001F
DATA 4 0x021b480c 0x00440044
DATA 4 0x021b4810 0x00440044
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b001c 0x00000000
DATA 4 0x021b0404 0x00011006
/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
/*
* Setup CCM_CCOSR register as follows:
*
* cko1_en = 1 --> CKO1 enabled
* cko1_div = 111 --> divide by 8
* cko1_sel = 1011 --> ahb_clk_root
*
* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
*/
DATA 4 0x020c4060 0x000000fb