mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-13 06:43:29 +08:00
2be296538e
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
205 lines
6.7 KiB
C
205 lines
6.7 KiB
C
/*
|
|
* pengwyn.h
|
|
*
|
|
* Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
|
|
*
|
|
* based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_PENGWYN_H
|
|
#define __CONFIG_PENGWYN_H
|
|
|
|
#define CONFIG_NAND
|
|
#define CONFIG_SERIAL1
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
#include <configs/ti_am335x_common.h>
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000
|
|
#define V_SCLK V_OSCK
|
|
|
|
/* set env size */
|
|
#define CONFIG_ENV_SIZE 0x4000
|
|
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x80200000\0" \
|
|
"fdtaddr=0x80F80000\0" \
|
|
"bootpart=0:2\0" \
|
|
"bootdir=/boot\0" \
|
|
"bootfile=zImage\0" \
|
|
"fdtfile=am335x-pengwyn.dtb\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"optargs=\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"rootpath=/export/rootfs\0" \
|
|
"nfsopts=nolock\0" \
|
|
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
|
"::off\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"bootenv=uEnv.txt\0" \
|
|
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
|
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"mmcloados=run mmcargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr};\0" \
|
|
"mmcboot=mmc dev ${mmcdev}; " \
|
|
"if mmc rescan; then " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootenv; then " \
|
|
"echo Loaded environment from ${bootenv};" \
|
|
"run importbootenv;" \
|
|
"fi;" \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loadimage; then " \
|
|
"run loadfdt;" \
|
|
"run mmcloados;" \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"setenv autoload no; " \
|
|
"dhcp; " \
|
|
"tftp ${loadaddr} ${bootfile}; " \
|
|
"tftp ${fdtaddr} ${fdtfile}; " \
|
|
"run netargs; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype}\0" \
|
|
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
|
|
"nandrootfstype=ubifs rootwait=1\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"nand read ${fdtaddr} u-boot-spl-os; " \
|
|
"nand read ${loadaddr} kernel; " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0"
|
|
#endif
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run mmcboot;" \
|
|
"run nandboot;"
|
|
|
|
/* NS16550 Configuration: primary UART via FTDI */
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000
|
|
|
|
/* I2C Configuration */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
/* SPL */
|
|
|
|
/* NAND support */
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_OMAP_GPMC
|
|
#define CONFIG_NAND_OMAP_ELM
|
|
|
|
/* NAND Configuration. */
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 4096
|
|
#define CONFIG_SYS_NAND_OOBSIZE 224
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\
|
|
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
|
|
34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\
|
|
50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\
|
|
66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\
|
|
82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\
|
|
98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
|
|
114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
|
|
134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
|
|
154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
|
|
174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
|
|
194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 26
|
|
#define CONFIG_SYS_NAND_ECCSTEPS 8
|
|
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
|
|
CONFIG_SYS_NAND_ECCSTEPS)
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
|
|
/* END NAND Configuration. */
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
|
|
|
|
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
|
/* Size must be a multiple of Nand erase size (524288 b) */
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(SPL)," \
|
|
"512k(SPL.backup1)," \
|
|
"512k(SPL.backup2)," \
|
|
"512k(SPL.backup3),1536k(u-boot)," \
|
|
"512k(u-boot-spl-os)," \
|
|
"512k(u-boot-env),5m(kernel),-(rootfs)"
|
|
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
|
|
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
|
/* NAND: SPL falcon mode configs */
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
|
|
#endif
|
|
|
|
/*
|
|
* USB configuration. We enable MUSB support, both for host and for
|
|
* gadget. We set USB0 as peripheral and USB1 as host, based on the
|
|
* board schematic and physical port wired to each. Then for host we
|
|
* add mass storage support.
|
|
*/
|
|
#define CONFIG_USB_MUSB_DSPS
|
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
|
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
|
#define CONFIG_AM335X_USB0
|
|
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
|
|
#define CONFIG_AM335X_USB1
|
|
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/* disable host part of MUSB in SPL */
|
|
/* Disable CPSW SPL support so we fit within the 101KiB limit. */
|
|
#endif
|
|
|
|
/* CPSW ethernet */
|
|
#define CONFIG_NET_MULTI
|
|
|
|
/* Network */
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_RESET 1
|
|
#define CONFIG_PHY_NATSEMI
|
|
#define CONFIG_PHY_REALTEK
|
|
|
|
/* CPSW support */
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
|
|
|
|
#endif /* ! __CONFIG_PENGWYN_H */
|