mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-13 06:43:29 +08:00
fbb0e15a42
This is most probably a typo, and in older u-uboot versions is same as 'saveenv', in the newer uboot versions there is a separate 'save' command that is different from 'saveenv'. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
16 lines
1.4 KiB
Plaintext
16 lines
1.4 KiB
Plaintext
addramfs=setenv bootargs "${bootargs} phram.phram=rootfs${boot_bank},${rootfsaddr},${rootfssize}"
|
|
boot_bank=-1
|
|
altbootcmd=run ${subbootcmds}
|
|
bootcmd=run ${subbootcmds}
|
|
subbootcmds=save_and_reset_once tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
|
|
save_and_reset_once=setenv save_and_reset_once true && saveenv && reset
|
|
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
|
|
configure=run set_uimage; run set_tftppath; km_setboardid && run try_import_rootfssize && saveenv && reset
|
|
setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
|
|
tftpfdt=if run set_fdthigh || test ${arch} != arm; then if tftpboot ${fdt_addr_r} ${tftppath}/fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; then; else tftpboot ${fdt_addr_r} ${tftppath}/${hostname}.dtb; fi; else true; fi
|
|
tftpkernel=tftpboot ${load_addr_r} ${tftppath}/${uimage}
|
|
tftpramfs=tftpboot ${rootfsaddr} ${tftppath}/rootfsImage
|
|
set_uimage=printenv uimage || setenv uimage uImage
|
|
set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi
|
|
try_import_rootfssize=if tftpboot ${load_addr_r} ${tftppath}/rootfssize.txt; then env import -t ${load_addr_r} ${filesize}; else echo no auto rootfs size; echo you can set rootfssize in /tftpboot/${tftppath}/rootfssize.txt and rerun ramfs; fi
|