mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-16 00:03:26 +08:00
1b0a936b52
Many Rockchip platforms require the same u-boot deploy procedure when TPL and SPL both enabled. The following examples are taken from doc/README.rockchip and board/theobroma-systems/lion_rk3368/README: RK3288: ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/mmcblk0 seek=64 RK3328: ./tools/mkimage -n rk3328 -T rksd -d ./tpl/u-boot-tpl.bin idbloader.img cat ./spl/u-boot-spl.bin >> idbloader.img sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 RK3368: ./tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img cat spl/u-boot-spl-dtb.bin >> spl-3368.img dd if=spl-3368.img of=/dev/sdb seek=64 RK3399: ./tools/mkimage -n rk3399 -T rksd -d ./tpl/u-boot-tpl-dtb.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/sdc seek=64 Here, we introduce generic idbloader.img target which is the TPL image followed by the SPL binary. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2084 lines
68 KiB
Makefile
2084 lines
68 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
|
|
VERSION = 2019
|
|
PATCHLEVEL = 10
|
|
SUBLEVEL =
|
|
EXTRAVERSION = -rc3
|
|
NAME =
|
|
|
|
# *DOCUMENTATION*
|
|
# To see a list of typical targets execute "make help"
|
|
# More info can be located in ./README
|
|
# Comments in this file are targeted only to the developer, do not
|
|
# expect to learn how to build the kernel reading this file.
|
|
|
|
# o Do not use make's built-in rules and variables
|
|
# (this increases performance and avoids hard-to-debug behaviour);
|
|
# o Look for make include files relative to root of kernel src
|
|
MAKEFLAGS += -rR --include-dir=$(CURDIR)
|
|
|
|
# Avoid funny character set dependencies
|
|
unexport LC_ALL
|
|
LC_COLLATE=C
|
|
LC_NUMERIC=C
|
|
export LC_COLLATE LC_NUMERIC
|
|
|
|
# Avoid interference with shell env settings
|
|
unexport GREP_OPTIONS
|
|
|
|
# We are using a recursive build, so we need to do a little thinking
|
|
# to get the ordering right.
|
|
#
|
|
# Most importantly: sub-Makefiles should only ever modify files in
|
|
# their own directory. If in some directory we have a dependency on
|
|
# a file in another dir (which doesn't happen often, but it's often
|
|
# unavoidable when linking the built-in.o targets which finally
|
|
# turn into vmlinux), we will call a sub make in that other dir, and
|
|
# after that we are sure that everything which is in that other dir
|
|
# is now up to date.
|
|
#
|
|
# The only cases where we need to modify files which have global
|
|
# effects are thus separated out and done before the recursive
|
|
# descending is started. They are now explicitly listed as the
|
|
# prepare rule.
|
|
|
|
# Beautify output
|
|
# ---------------------------------------------------------------------------
|
|
#
|
|
# Normally, we echo the whole command before executing it. By making
|
|
# that echo $($(quiet)$(cmd)), we now have the possibility to set
|
|
# $(quiet) to choose other forms of output instead, e.g.
|
|
#
|
|
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
|
|
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
|
|
#
|
|
# If $(quiet) is empty, the whole command will be printed.
|
|
# If it is set to "quiet_", only the short version will be printed.
|
|
# If it is set to "silent_", nothing will be printed at all, since
|
|
# the variable $(silent_cmd_cc_o_c) doesn't exist.
|
|
#
|
|
# A simple variant is to prefix commands with $(Q) - that's useful
|
|
# for commands that shall be hidden in non-verbose mode.
|
|
#
|
|
# $(Q)ln $@ :<
|
|
#
|
|
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
|
|
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
|
|
#
|
|
# To put more focus on warnings, be less verbose as default
|
|
# Use 'make V=1' to see the full commands
|
|
|
|
ifeq ("$(origin V)", "command line")
|
|
KBUILD_VERBOSE = $(V)
|
|
endif
|
|
ifndef KBUILD_VERBOSE
|
|
KBUILD_VERBOSE = 0
|
|
endif
|
|
|
|
ifeq ($(KBUILD_VERBOSE),1)
|
|
quiet =
|
|
Q =
|
|
else
|
|
quiet=quiet_
|
|
Q = @
|
|
endif
|
|
|
|
# If the user is running make -s (silent mode), suppress echoing of
|
|
# commands
|
|
|
|
ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
|
|
ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
|
|
quiet=silent_
|
|
endif
|
|
else # make-3.8x
|
|
ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
|
|
quiet=silent_
|
|
endif
|
|
endif
|
|
|
|
export quiet Q KBUILD_VERBOSE
|
|
|
|
# kbuild supports saving output files in a separate directory.
|
|
# To locate output files in a separate directory two syntaxes are supported.
|
|
# In both cases the working directory must be the root of the kernel src.
|
|
# 1) O=
|
|
# Use "make O=dir/to/store/output/files/"
|
|
#
|
|
# 2) Set KBUILD_OUTPUT
|
|
# Set the environment variable KBUILD_OUTPUT to point to the directory
|
|
# where the output files shall be placed.
|
|
# export KBUILD_OUTPUT=dir/to/store/output/files/
|
|
# make
|
|
#
|
|
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
|
|
# variable.
|
|
|
|
# KBUILD_SRC is set on invocation of make in OBJ directory
|
|
# KBUILD_SRC is not intended to be used by the regular user (for now)
|
|
ifeq ($(KBUILD_SRC),)
|
|
|
|
# OK, Make called in directory where kernel src resides
|
|
# Do we want to locate output files in a separate directory?
|
|
ifeq ("$(origin O)", "command line")
|
|
KBUILD_OUTPUT := $(O)
|
|
endif
|
|
|
|
# That's our default target when none is given on the command line
|
|
PHONY := _all
|
|
_all:
|
|
|
|
# Cancel implicit rules on top Makefile
|
|
$(CURDIR)/Makefile Makefile: ;
|
|
|
|
ifneq ($(KBUILD_OUTPUT),)
|
|
# Invoke a second make in the output directory, passing relevant variables
|
|
# check that the output directory actually exists
|
|
saved-output := $(KBUILD_OUTPUT)
|
|
KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
|
|
&& /bin/pwd)
|
|
$(if $(KBUILD_OUTPUT),, \
|
|
$(error failed to create output directory "$(saved-output)"))
|
|
|
|
PHONY += $(MAKECMDGOALS) sub-make
|
|
|
|
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
|
|
@:
|
|
|
|
sub-make: FORCE
|
|
$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
|
|
-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
|
|
|
|
# Leave processing to above invocation of make
|
|
skip-makefile := 1
|
|
endif # ifneq ($(KBUILD_OUTPUT),)
|
|
endif # ifeq ($(KBUILD_SRC),)
|
|
|
|
# We process the rest of the Makefile if this is the final invocation of make
|
|
ifeq ($(skip-makefile),)
|
|
|
|
# Do not print "Entering directory ...",
|
|
# but we want to display it when entering to the output directory
|
|
# so that IDEs/editors are able to understand relative filenames.
|
|
MAKEFLAGS += --no-print-directory
|
|
|
|
# Call a source code checker (by default, "sparse") as part of the
|
|
# C compilation.
|
|
#
|
|
# Use 'make C=1' to enable checking of only re-compiled files.
|
|
# Use 'make C=2' to enable checking of *all* source files, regardless
|
|
# of whether they are re-compiled or not.
|
|
#
|
|
# See the file "doc/sparse.txt" for more details, including
|
|
# where to get the "sparse" utility.
|
|
|
|
ifeq ("$(origin C)", "command line")
|
|
KBUILD_CHECKSRC = $(C)
|
|
endif
|
|
ifndef KBUILD_CHECKSRC
|
|
KBUILD_CHECKSRC = 0
|
|
endif
|
|
|
|
# Use make M=dir to specify directory of external module to build
|
|
# Old syntax make ... SUBDIRS=$PWD is still supported
|
|
# Setting the environment variable KBUILD_EXTMOD take precedence
|
|
ifdef SUBDIRS
|
|
KBUILD_EXTMOD ?= $(SUBDIRS)
|
|
endif
|
|
|
|
ifeq ("$(origin M)", "command line")
|
|
KBUILD_EXTMOD := $(M)
|
|
endif
|
|
|
|
# If building an external module we do not care about the all: rule
|
|
# but instead _all depend on modules
|
|
PHONY += all
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
_all: all
|
|
else
|
|
_all: modules
|
|
endif
|
|
|
|
ifeq ($(KBUILD_SRC),)
|
|
# building in the source tree
|
|
srctree := .
|
|
else
|
|
ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
|
|
# building in a subdirectory of the source tree
|
|
srctree := ..
|
|
else
|
|
srctree := $(KBUILD_SRC)
|
|
endif
|
|
endif
|
|
objtree := .
|
|
src := $(srctree)
|
|
obj := $(objtree)
|
|
|
|
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
|
|
|
|
export srctree objtree VPATH
|
|
|
|
# Make sure CDPATH settings don't interfere
|
|
unexport CDPATH
|
|
|
|
#########################################################################
|
|
|
|
HOSTARCH := $(shell uname -m | \
|
|
sed -e s/i.86/x86/ \
|
|
-e s/sun4u/sparc64/ \
|
|
-e s/arm.*/arm/ \
|
|
-e s/sa110/arm/ \
|
|
-e s/ppc64/powerpc/ \
|
|
-e s/ppc/powerpc/ \
|
|
-e s/macppc/powerpc/\
|
|
-e s/sh.*/sh/)
|
|
|
|
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
|
|
sed -e 's/\(cygwin\).*/cygwin/')
|
|
|
|
export HOSTARCH HOSTOS
|
|
|
|
#########################################################################
|
|
|
|
# set default to nothing for native builds
|
|
ifeq ($(HOSTARCH),$(ARCH))
|
|
CROSS_COMPILE ?=
|
|
endif
|
|
|
|
KCONFIG_CONFIG ?= .config
|
|
export KCONFIG_CONFIG
|
|
|
|
# SHELL used by kbuild
|
|
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
|
|
else if [ -x /bin/bash ]; then echo /bin/bash; \
|
|
else echo sh; fi ; fi)
|
|
|
|
HOSTCC = cc
|
|
HOSTCXX = c++
|
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
|
|
$(if $(CONFIG_TOOLS_DEBUG),-g)
|
|
HOSTCXXFLAGS = -O2
|
|
|
|
# With the move to GCC 6, we have implicitly upgraded our language
|
|
# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
|
|
# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
|
|
# have older compilers as their default, so we make it explicit for
|
|
# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
|
|
CSTD_FLAG := -std=gnu11
|
|
ifeq ($(HOSTOS),linux)
|
|
HOSTCFLAGS += $(CSTD_FLAG)
|
|
endif
|
|
|
|
ifeq ($(HOSTOS),cygwin)
|
|
HOSTCFLAGS += -ansi
|
|
endif
|
|
|
|
# Mac OS X / Darwin's C preprocessor is Apple specific. It
|
|
# generates numerous errors and warnings. We want to bypass it
|
|
# and use GNU C's cpp. To do this we pass the -traditional-cpp
|
|
# option to the compiler. Note that the -traditional-cpp flag
|
|
# DOES NOT have the same semantics as GNU C's flag, all it does
|
|
# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
|
|
#
|
|
# Apple's linker is similar, thanks to the new 2 stage linking
|
|
# multiple symbol definitions are treated as errors, hence the
|
|
# -multiply_defined suppress option to turn off this error.
|
|
#
|
|
ifeq ($(HOSTOS),darwin)
|
|
# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
|
|
DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
|
|
DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
|
|
|
|
os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
|
|
$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
|
|
|
|
os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
|
|
$(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
|
|
|
|
# Snow Leopards build environment has no longer restrictions as described above
|
|
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
|
|
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
|
|
HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
|
|
|
|
# since Lion (10.7) ASLR is on by default, but we use linker generated lists
|
|
# in some host tools which is a problem then ... so disable ASLR for these
|
|
# tools
|
|
HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
|
|
|
|
# macOS Mojave (10.14.X)
|
|
# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
|
|
HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
|
|
endif
|
|
|
|
# Decide whether to build built-in, modular, or both.
|
|
# Normally, just do built-in.
|
|
|
|
KBUILD_MODULES :=
|
|
KBUILD_BUILTIN := 1
|
|
|
|
# If we have only "make modules", don't compile built-in objects.
|
|
# When we're building modules with modversions, we need to consider
|
|
# the built-in objects during the descend as well, in order to
|
|
# make sure the checksums are up to date before we record them.
|
|
|
|
ifeq ($(MAKECMDGOALS),modules)
|
|
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
|
|
endif
|
|
|
|
# If we have "make <whatever> modules", compile modules
|
|
# in addition to whatever we do anyway.
|
|
# Just "make" or "make all" shall build modules as well
|
|
|
|
# U-Boot does not need modules
|
|
#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
|
|
# KBUILD_MODULES := 1
|
|
#endif
|
|
|
|
#ifeq ($(MAKECMDGOALS),)
|
|
# KBUILD_MODULES := 1
|
|
#endif
|
|
|
|
define size_check
|
|
actual=$$( wc -c $1 | awk '{print $$1}'); \
|
|
limit=$$( printf "%d" $2 ); \
|
|
if test $$actual -gt $$limit; then \
|
|
echo "$1 exceeds file size limit:" >&2; \
|
|
echo " limit: $$limit bytes" >&2; \
|
|
echo " actual: $$actual bytes" >&2; \
|
|
echo " excess: $$((actual - limit)) bytes" >&2; \
|
|
exit 1; \
|
|
fi
|
|
endef
|
|
export size_check
|
|
|
|
export KBUILD_MODULES KBUILD_BUILTIN
|
|
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
|
|
|
|
# We need some generic definitions (do not try to remake the file).
|
|
scripts/Kbuild.include: ;
|
|
include scripts/Kbuild.include
|
|
|
|
# Make variables (CC, etc...)
|
|
|
|
AS = $(CROSS_COMPILE)as
|
|
# Always use GNU ld
|
|
ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
|
|
LD = $(CROSS_COMPILE)ld.bfd
|
|
else
|
|
LD = $(CROSS_COMPILE)ld
|
|
endif
|
|
CC = $(CROSS_COMPILE)gcc
|
|
CPP = $(CC) -E
|
|
AR = $(CROSS_COMPILE)ar
|
|
NM = $(CROSS_COMPILE)nm
|
|
LDR = $(CROSS_COMPILE)ldr
|
|
STRIP = $(CROSS_COMPILE)strip
|
|
OBJCOPY = $(CROSS_COMPILE)objcopy
|
|
OBJDUMP = $(CROSS_COMPILE)objdump
|
|
LEX = flex
|
|
YACC = bison
|
|
AWK = awk
|
|
PERL = perl
|
|
PYTHON ?= python
|
|
PYTHON2 = python2
|
|
PYTHON3 = python3
|
|
DTC ?= $(objtree)/scripts/dtc/dtc
|
|
CHECK = sparse
|
|
|
|
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
|
|
-Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
|
|
|
|
KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
|
|
|
|
KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
|
|
-Wno-format-security \
|
|
-fno-builtin -ffreestanding $(CSTD_FLAG)
|
|
KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
|
|
KBUILD_AFLAGS := -D__ASSEMBLY__
|
|
|
|
# Don't generate position independent code
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
|
|
KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
|
|
|
|
# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
|
|
UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
|
|
UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
|
|
|
|
export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
|
|
export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
|
|
export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
|
|
export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
|
|
export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
|
|
export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
|
|
|
|
export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
|
|
export KBUILD_CFLAGS KBUILD_AFLAGS
|
|
|
|
# When compiling out-of-tree modules, put MODVERDIR in the module
|
|
# tree rather than in the kernel tree. The kernel tree might
|
|
# even be read-only.
|
|
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
|
|
|
|
# Files to ignore in find ... statements
|
|
|
|
export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
|
|
-name CVS -o -name .pc -o -name .hg -o -name .git \) \
|
|
-prune -o
|
|
export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
|
|
--exclude CVS --exclude .pc --exclude .hg --exclude .git
|
|
|
|
# ===========================================================================
|
|
# Rules shared between *config targets and build targets
|
|
|
|
# Basic helpers built in scripts/
|
|
PHONY += scripts_basic
|
|
scripts_basic:
|
|
$(Q)$(MAKE) $(build)=scripts/basic
|
|
$(Q)rm -f .tmp_quiet_recordmcount
|
|
|
|
# To avoid any implicit rule to kick in, define an empty command.
|
|
scripts/basic/%: scripts_basic ;
|
|
|
|
PHONY += outputmakefile
|
|
# outputmakefile generates a Makefile in the output directory, if using a
|
|
# separate output directory. This allows convenient use of make in the
|
|
# output directory.
|
|
outputmakefile:
|
|
ifneq ($(KBUILD_SRC),)
|
|
$(Q)ln -fsn $(srctree) source
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
|
|
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
|
|
endif
|
|
|
|
# To make sure we do not include .config for any of the *config targets
|
|
# catch them early, and hand them over to scripts/kconfig/Makefile
|
|
# It is allowed to specify more targets when calling make, including
|
|
# mixing *config targets and build targets.
|
|
# For example 'make oldconfig all'.
|
|
# Detect when mixed targets is specified, and make a second invocation
|
|
# of make so .config is not included in this case either (for *config).
|
|
|
|
version_h := include/generated/version_autogenerated.h
|
|
timestamp_h := include/generated/timestamp_autogenerated.h
|
|
defaultenv_h := include/generated/defaultenv_autogenerated.h
|
|
|
|
no-dot-config-targets := clean clobber mrproper distclean \
|
|
help %docs check% coccicheck \
|
|
ubootversion backup tests check qcheck
|
|
|
|
config-targets := 0
|
|
mixed-targets := 0
|
|
dot-config := 1
|
|
|
|
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
|
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
|
dot-config := 0
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
|
|
config-targets := 1
|
|
ifneq ($(words $(MAKECMDGOALS)),1)
|
|
mixed-targets := 1
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(mixed-targets),1)
|
|
# ===========================================================================
|
|
# We're called with mixed targets (*config and build targets).
|
|
# Handle them one by one.
|
|
|
|
PHONY += $(MAKECMDGOALS) __build_one_by_one
|
|
|
|
$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
|
|
@:
|
|
|
|
__build_one_by_one:
|
|
$(Q)set -e; \
|
|
for i in $(MAKECMDGOALS); do \
|
|
$(MAKE) -f $(srctree)/Makefile $$i; \
|
|
done
|
|
|
|
else
|
|
ifeq ($(config-targets),1)
|
|
# ===========================================================================
|
|
# *config targets only - make sure prerequisites are updated, and descend
|
|
# in scripts/kconfig to make the *config target
|
|
|
|
KBUILD_DEFCONFIG := sandbox_defconfig
|
|
export KBUILD_DEFCONFIG KBUILD_KCONFIG
|
|
|
|
config: scripts_basic outputmakefile FORCE
|
|
$(Q)$(MAKE) $(build)=scripts/kconfig $@
|
|
|
|
%config: scripts_basic outputmakefile FORCE
|
|
$(Q)$(MAKE) $(build)=scripts/kconfig $@
|
|
|
|
else
|
|
# ===========================================================================
|
|
# Build targets only - this includes vmlinux, arch specific targets, clean
|
|
# targets and others. In general all targets except *config targets.
|
|
|
|
# Additional helpers built in scripts/
|
|
# Carefully list dependencies so we do not try to build scripts twice
|
|
# in parallel
|
|
PHONY += scripts
|
|
scripts: scripts_basic include/config/auto.conf
|
|
$(Q)$(MAKE) $(build)=$(@)
|
|
|
|
ifeq ($(dot-config),1)
|
|
# Read in config
|
|
-include include/config/auto.conf
|
|
|
|
# Read in dependencies to all Kconfig* files, make sure to run
|
|
# oldconfig if changes are detected.
|
|
-include include/config/auto.conf.cmd
|
|
|
|
# To avoid any implicit rule to kick in, define an empty command
|
|
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
|
|
|
|
# If .config is newer than include/config/auto.conf, someone tinkered
|
|
# with it and forgot to run make oldconfig.
|
|
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
|
|
# we execute the config step to be sure to catch updated Kconfig files
|
|
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
|
|
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
|
|
@# If the following part fails, include/config/auto.conf should be
|
|
@# deleted so "make silentoldconfig" will be re-run on the next build.
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
|
|
{ rm -f include/config/auto.conf; false; }
|
|
@# include/config.h has been updated after "make silentoldconfig".
|
|
@# We need to touch include/config/auto.conf so it gets newer
|
|
@# than include/config.h.
|
|
@# Otherwise, 'make silentoldconfig' would be invoked twice.
|
|
$(Q)touch include/config/auto.conf
|
|
|
|
u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
|
|
|
|
-include include/autoconf.mk
|
|
-include include/autoconf.mk.dep
|
|
|
|
# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
|
|
# is up-to-date. When we switch to a different board configuration, old CONFIG
|
|
# macros are still remaining in include/config/auto.conf. Without the following
|
|
# gimmick, wrong config.mk would be included leading nasty warnings/errors.
|
|
ifneq ($(wildcard $(KCONFIG_CONFIG)),)
|
|
ifneq ($(wildcard include/config/auto.conf),)
|
|
autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
|
|
include/config/auto.conf)
|
|
ifeq ($(autoconf_is_old),)
|
|
include config.mk
|
|
include arch/$(ARCH)/Makefile
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# These are set by the arch-specific config.mk. Make sure they are exported
|
|
# so they can be used when building an EFI application.
|
|
export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
|
|
export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
|
|
export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
|
|
export CFLAGS_EFI # Compiler flags to add when building EFI app
|
|
export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
|
|
export EFI_TARGET # binutils target if EFI is natively supported
|
|
|
|
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
|
|
# that (or fail if absent). Otherwise, search for a linker script in a
|
|
# standard location.
|
|
|
|
ifndef LDSCRIPT
|
|
#LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
|
|
ifdef CONFIG_SYS_LDSCRIPT
|
|
# need to strip off double quotes
|
|
LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
|
|
endif
|
|
endif
|
|
|
|
# If there is no specified link script, we look in a number of places for it
|
|
ifndef LDSCRIPT
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
|
|
endif
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
|
|
endif
|
|
endif
|
|
|
|
else
|
|
# Dummy target needed, because used as prerequisite
|
|
include/config/auto.conf: ;
|
|
endif # $(dot-config)
|
|
|
|
#
|
|
# Xtensa linker script cannot be preprocessed with -ansi because of
|
|
# preprocessor operations on strings that don't make C identifiers.
|
|
#
|
|
ifeq ($(CONFIG_XTENSA),)
|
|
LDPPFLAGS += -ansi
|
|
endif
|
|
|
|
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
|
|
KBUILD_CFLAGS += -Os
|
|
else
|
|
KBUILD_CFLAGS += -O2
|
|
endif
|
|
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
|
|
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
|
|
|
|
# change __FILE__ to the relative path from the srctree
|
|
KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
|
|
|
|
KBUILD_CFLAGS += -g
|
|
# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
|
|
# option to the assembler.
|
|
KBUILD_AFLAGS += -g
|
|
|
|
# Report stack usage if supported
|
|
# ARC tools based on GCC 7.1 has an issue with stack usage
|
|
# with naked functions, see commit message for more details
|
|
ifndef CONFIG_ARC
|
|
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
|
|
KBUILD_CFLAGS += -fstack-usage
|
|
endif
|
|
endif
|
|
|
|
KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
|
|
ifeq ($(cc-name),clang)
|
|
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
|
|
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
|
|
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
|
|
endif
|
|
|
|
# turn jbsr into jsr for m68k
|
|
ifeq ($(ARCH),m68k)
|
|
ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
|
|
KBUILD_AFLAGS += -Wa,-gstabs,-S
|
|
endif
|
|
endif
|
|
|
|
# Prohibit date/time macros, which would make the build non-deterministic
|
|
KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
|
|
|
|
include scripts/Makefile.extrawarn
|
|
|
|
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
|
|
KBUILD_CPPFLAGS += $(KCPPFLAGS)
|
|
KBUILD_AFLAGS += $(KAFLAGS)
|
|
KBUILD_CFLAGS += $(KCFLAGS)
|
|
|
|
# Use UBOOTINCLUDE when you must reference the include/ directory.
|
|
# Needed to be compatible with the O= option
|
|
UBOOTINCLUDE := \
|
|
-Iinclude \
|
|
$(if $(KBUILD_SRC), -I$(srctree)/include) \
|
|
$(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
|
|
$(if $(CONFIG_HAS_THUMB2),, \
|
|
-I$(srctree)/arch/$(ARCH)/thumb1/include),) \
|
|
-I$(srctree)/arch/$(ARCH)/include \
|
|
-include $(srctree)/include/linux/kconfig.h
|
|
|
|
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
|
|
CHECKFLAGS += $(NOSTDINC_FLAGS)
|
|
|
|
# FIX ME
|
|
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
|
|
$(NOSTDINC_FLAGS)
|
|
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
|
|
|
|
#########################################################################
|
|
# U-Boot objects....order is important (i.e. start must be first)
|
|
|
|
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
|
|
|
|
libs-y += lib/
|
|
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
|
|
libs-$(CONFIG_OF_EMBED) += dts/
|
|
libs-y += fs/
|
|
libs-y += net/
|
|
libs-y += disk/
|
|
libs-y += drivers/
|
|
libs-y += drivers/dma/
|
|
libs-y += drivers/gpio/
|
|
libs-y += drivers/i2c/
|
|
libs-y += drivers/mtd/
|
|
libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
|
|
libs-y += drivers/mtd/onenand/
|
|
libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
|
|
libs-y += drivers/mtd/spi/
|
|
libs-y += drivers/net/
|
|
libs-y += drivers/net/phy/
|
|
libs-y += drivers/power/ \
|
|
drivers/power/domain/ \
|
|
drivers/power/fuel_gauge/ \
|
|
drivers/power/mfd/ \
|
|
drivers/power/pmic/ \
|
|
drivers/power/battery/ \
|
|
drivers/power/regulator/
|
|
libs-y += drivers/spi/
|
|
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
|
|
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
|
|
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
|
|
libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
|
|
libs-y += drivers/serial/
|
|
libs-y += drivers/usb/dwc3/
|
|
libs-y += drivers/usb/common/
|
|
libs-y += drivers/usb/emul/
|
|
libs-y += drivers/usb/eth/
|
|
libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
|
|
libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
|
|
libs-y += drivers/usb/host/
|
|
libs-y += drivers/usb/musb/
|
|
libs-y += drivers/usb/musb-new/
|
|
libs-y += drivers/usb/phy/
|
|
libs-y += drivers/usb/ulpi/
|
|
libs-y += cmd/
|
|
libs-y += common/
|
|
libs-y += env/
|
|
libs-$(CONFIG_API) += api/
|
|
libs-$(CONFIG_HAS_POST) += post/
|
|
libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
|
|
libs-$(CONFIG_UT_ENV) += test/env/
|
|
libs-$(CONFIG_UT_OVERLAY) += test/overlay/
|
|
|
|
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
|
|
|
|
libs-y := $(sort $(libs-y))
|
|
|
|
u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
|
|
|
|
u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
|
|
|
|
libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
|
|
|
|
u-boot-init := $(head-y)
|
|
u-boot-main := $(libs-y)
|
|
|
|
|
|
# Add GCC lib
|
|
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
|
|
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
|
|
else
|
|
PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
|
|
endif
|
|
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
|
|
|
|
ifdef CONFIG_CC_COVERAGE
|
|
KBUILD_CFLAGS += --coverage
|
|
PLATFORM_LIBGCC += -lgcov
|
|
endif
|
|
|
|
export PLATFORM_LIBS
|
|
export PLATFORM_LIBGCC
|
|
|
|
# Special flags for CPP when processing the linker script.
|
|
# Pass the version down so we can handle backwards compatibility
|
|
# on the fly.
|
|
LDPPFLAGS += \
|
|
-include $(srctree)/include/u-boot/u-boot.lds.h \
|
|
-DCPUDIR=$(CPUDIR) \
|
|
$(shell $(LD) --version | \
|
|
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
|
|
|
|
#########################################################################
|
|
#########################################################################
|
|
|
|
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
|
|
BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
|
|
else
|
|
BOARD_SIZE_CHECK =
|
|
endif
|
|
|
|
ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
|
|
SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
|
|
else
|
|
SPL_SIZE_CHECK =
|
|
endif
|
|
|
|
# Statically apply RELA-style relocations (currently arm64 only)
|
|
# This is useful for arm64 where static relocation needs to be performed on
|
|
# the raw binary, but certain simulators only accept an ELF file (but don't
|
|
# do the relocation).
|
|
ifneq ($(CONFIG_STATIC_RELA),)
|
|
# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
|
|
DO_STATIC_RELA = \
|
|
start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
|
|
end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
|
|
tools/relocate-rela $(2) $(3) $$start $$end
|
|
else
|
|
DO_STATIC_RELA =
|
|
endif
|
|
|
|
# Always append ALL so that arch config.mk's can add custom ones
|
|
ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
|
|
|
|
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
|
|
ifeq ($(CONFIG_SPL_FSL_PBL),y)
|
|
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
|
|
else
|
|
ifneq ($(CONFIG_SECURE_BOOT), y)
|
|
# For Secure Boot The Image needs to be signed and Header must also
|
|
# be included. So The image has to be built explicitly
|
|
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
|
|
endif
|
|
endif
|
|
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
|
|
ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
|
|
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
|
|
else
|
|
ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
|
|
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
|
|
else
|
|
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
|
|
endif
|
|
endif
|
|
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
|
|
ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
|
|
ifeq ($(CONFIG_SPL_FRAMEWORK),y)
|
|
ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
|
|
endif
|
|
ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
|
|
ifneq ($(CONFIG_SPL_TARGET),)
|
|
ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
|
|
endif
|
|
ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
|
|
ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
|
|
ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
|
|
|
|
ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
|
|
ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
|
|
endif
|
|
|
|
# Build a combined spl + u-boot image for sunxi
|
|
ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
|
|
ALL-y += u-boot-sunxi-with-spl.bin
|
|
endif
|
|
|
|
# enable combined SPL/u-boot/dtb rules for tegra
|
|
ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
|
|
ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
|
|
ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
|
|
endif
|
|
|
|
ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
|
|
|
|
# Add optional build target if defined in board/cpu/soc headers
|
|
ifneq ($(CONFIG_BUILD_TARGET),)
|
|
ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
|
|
endif
|
|
|
|
ifdef CONFIG_INIT_SP_RELATIVE
|
|
ALL-y += init_sp_bss_offset_check
|
|
endif
|
|
|
|
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
|
|
ALL-y += u-boot-with-dtb.bin
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
|
|
ALL-y += idbloader.img
|
|
endif
|
|
|
|
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
|
|
|
|
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
|
|
LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
|
|
|
|
ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
|
|
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
|
|
endif
|
|
|
|
# Normally we fill empty space with 0xff
|
|
quiet_cmd_objcopy = OBJCOPY $@
|
|
cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
|
|
$(OBJCOPYFLAGS_$(@F)) $< $@
|
|
|
|
# Provide a version which does not do this, for use by EFI
|
|
quiet_cmd_zobjcopy = OBJCOPY $@
|
|
cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
|
|
|
|
quiet_cmd_efipayload = OBJCOPY $@
|
|
cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
|
|
|
|
MKIMAGEOUTPUT ?= /dev/null
|
|
|
|
quiet_cmd_mkimage = MKIMAGE $@
|
|
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
|
|
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
|
|
|
|
quiet_cmd_mkfitimage = MKIMAGE $@
|
|
cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
|
|
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
|
|
|
|
quiet_cmd_cat = CAT $@
|
|
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
|
|
|
|
append = cat $(filter-out $< $(PHONY), $^) >> $@
|
|
|
|
quiet_cmd_pad_cat = CAT $@
|
|
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
|
|
|
|
cfg: u-boot.cfg
|
|
|
|
quiet_cmd_cfgcheck = CFGCHK $2
|
|
cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
|
|
$(srctree)/scripts/config_whitelist.txt $(srctree)
|
|
|
|
all: $(ALL-y)
|
|
ifeq ($(CONFIG_DEPRECATED),y)
|
|
$(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
|
|
ifeq ($(CONFIG_SPI),y)
|
|
ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
|
|
$(warning "The relevant config item with associated code will remove in v2019.07 release.")
|
|
endif
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_MMC),y)
|
|
ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
|
|
@echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_USB),y)
|
|
ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_USB. Please update"
|
|
@echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_MVSATA_IDE),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
|
|
@echo >&2 "ported to driver-model (DM) yet. Please update the storage"
|
|
@echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
|
|
@echo >&2 "release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
ifeq ($(CONFIG_LIBATA),y)
|
|
ifneq ($(CONFIG_AHCI),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
|
|
@echo >&2 "enabled. Please update the storage controller driver to use"
|
|
@echo >&2 "CONFIG_AHCI before the v2019.07 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_PCI),y)
|
|
ifneq ($(CONFIG_DM_PCI),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
|
|
@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
|
|
ifneq ($(CONFIG_DM_VIDEO),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
|
|
@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifeq ($(CONFIG_OF_EMBED),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
|
|
@echo >&2 "be used for debugging purposes. Please use"
|
|
@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
|
|
@echo >&2 "See doc/README.fdt-control for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
ifeq ($(CONFIG_SPI_FLASH),y)
|
|
ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
|
|
@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
|
|
ifneq ($(CONFIG_WDT),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
|
|
@echo >&2 "Please update the board to use CONFIG_WDT before the"
|
|
@echo >&2 "v2019.10 release."
|
|
@echo >&2 "Failure to update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
ifneq ($(CONFIG_NET),)
|
|
ifneq ($(CONFIG_DM_ETH),y)
|
|
@echo >&2 "===================== WARNING ======================"
|
|
@echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
|
|
@echo >&2 "for Ethernet drivers). Please update the board to use"
|
|
@echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
|
|
@echo >&2 "update by the deadline may result in board removal."
|
|
@echo >&2 "See doc/driver-model/migration.rst for more info."
|
|
@echo >&2 "===================================================="
|
|
endif
|
|
endif
|
|
@# Check that this build does not use CONFIG options that we do not
|
|
@# know about unless they are in Kconfig. All the existing CONFIG
|
|
@# options are whitelisted, so new ones should not be added.
|
|
$(call cmd,cfgcheck,u-boot.cfg)
|
|
|
|
PHONY += dtbs
|
|
dtbs: dts/dt.dtb
|
|
@:
|
|
dts/dt.dtb: u-boot
|
|
$(Q)$(MAKE) $(build)=dts dtbs
|
|
|
|
quiet_cmd_copy = COPY $@
|
|
cmd_copy = cp $< $@
|
|
|
|
ifeq ($(CONFIG_MULTI_DTB_FIT),y)
|
|
|
|
ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
|
|
FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
|
|
else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
|
|
FINAL_DTB_CONTAINER = fit-dtb.blob.gz
|
|
else
|
|
FINAL_DTB_CONTAINER = fit-dtb.blob
|
|
endif
|
|
|
|
fit-dtb.blob.gz: fit-dtb.blob
|
|
@gzip -kf9 $< > $@
|
|
|
|
fit-dtb.blob.lzo: fit-dtb.blob
|
|
@lzop -f9 $< > $@
|
|
|
|
fit-dtb.blob: dts/dt.dtb FORCE
|
|
$(call if_changed,mkimage)
|
|
ifneq ($(SOURCE_DATE_EPOCH),)
|
|
touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
|
|
chmod 0600 fit-dtb.blob
|
|
endif
|
|
|
|
MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
|
|
-a 0 -e 0 -E \
|
|
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
|
|
|
|
ifneq ($(EXT_DTB),)
|
|
u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
|
|
$(call if_changed,cat)
|
|
else
|
|
u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
|
|
$(call if_changed,cat)
|
|
endif
|
|
|
|
u-boot.bin: u-boot-fit-dtb.bin FORCE
|
|
$(call if_changed,copy)
|
|
|
|
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
|
|
$(call if_changed,cat)
|
|
|
|
else ifeq ($(CONFIG_OF_SEPARATE),y)
|
|
u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
|
|
$(call if_changed,cat)
|
|
|
|
u-boot.bin: u-boot-dtb.bin FORCE
|
|
$(call if_changed,copy)
|
|
else
|
|
u-boot.bin: u-boot-nodtb.bin FORCE
|
|
$(call if_changed,copy)
|
|
endif
|
|
|
|
%.imx: %.bin
|
|
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
|
|
$(BOARD_SIZE_CHECK)
|
|
|
|
%.vyb: %.imx
|
|
$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
|
|
|
|
quiet_cmd_copy = COPY $@
|
|
cmd_copy = cp $< $@
|
|
|
|
u-boot.dtb: dts/dt.dtb
|
|
$(call cmd,copy)
|
|
|
|
OBJCOPYFLAGS_u-boot.hex := -O ihex
|
|
|
|
OBJCOPYFLAGS_u-boot.srec := -O srec
|
|
|
|
u-boot.hex u-boot.srec: u-boot FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
|
|
|
|
u-boot-elf.srec: u-boot.elf FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
|
|
|
|
spl/u-boot-spl.srec: spl/u-boot-spl FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
%.scif: %.srec
|
|
$(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
|
|
|
|
OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
|
|
$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
|
|
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
|
|
|
|
OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
|
|
|
|
spl/u-boot-spl.hex: spl/u-boot-spl FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
binary_size_check: u-boot-nodtb.bin FORCE
|
|
@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
|
|
map_size=$(shell cat u-boot.map | \
|
|
awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
|
|
| sed 's/0X//g' \
|
|
| bc); \
|
|
if [ "" != "$$map_size" ]; then \
|
|
if test $$map_size -ne $$file_size; then \
|
|
echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
|
|
echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
|
|
exit 1; \
|
|
fi \
|
|
fi
|
|
|
|
ifdef CONFIG_INIT_SP_RELATIVE
|
|
ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
|
|
subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
|
|
else
|
|
subtract_sys_malloc_f_len = true
|
|
endif
|
|
# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
|
|
# so low that the DTB could probably use 90%+ of the available space, for
|
|
# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
|
|
# safe for now and tweak this later if space becomes tight.
|
|
# A rejected alternative would be to check that some absolute minimum stack
|
|
# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
|
|
# deliberately build-specific, to take account of build-to-build stack usage
|
|
# differences due to different feature sets, there is no common absolute value
|
|
# to check against.
|
|
init_sp_bss_offset_check: u-boot.dtb FORCE
|
|
@dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
|
|
space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
|
|
$(subtract_sys_malloc_f_len) ; \
|
|
quarter_space=$$(($${space} / 4)) ; \
|
|
if [ $${dtb_size} -gt $${quarter_space} ]; then \
|
|
echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
|
|
echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
|
|
exit 1 ; \
|
|
fi
|
|
endif
|
|
|
|
u-boot-nodtb.bin: u-boot FORCE
|
|
$(call if_changed,objcopy)
|
|
$(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
|
|
$(BOARD_SIZE_CHECK)
|
|
|
|
u-boot.ldr: u-boot
|
|
$(CREATE_LDR_ENV)
|
|
$(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
|
|
$(BOARD_SIZE_CHECK)
|
|
|
|
# binman
|
|
# ---------------------------------------------------------------------------
|
|
# Use 'make BINMAN_DEBUG=1' to enable debugging
|
|
quiet_cmd_binman = BINMAN $@
|
|
cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
|
|
build -u -d u-boot.dtb -O . -m \
|
|
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
|
|
$(BINMAN_$(@F))
|
|
|
|
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
|
|
|
|
OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
|
|
|
|
u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
#
|
|
# U-Boot entry point, needed for booting of full-blown U-Boot
|
|
# from the SPL U-Boot version.
|
|
#
|
|
ifndef CONFIG_SYS_UBOOT_START
|
|
CONFIG_SYS_UBOOT_START := 0
|
|
endif
|
|
|
|
# Boards with more complex image requirments can provide an .its source file
|
|
# or a generator script
|
|
ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
|
|
U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
|
|
else
|
|
ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
|
|
U_BOOT_ITS := u-boot.its
|
|
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
|
|
U_BOOT_ITS_DEPS += u-boot-nodtb.bin
|
|
endif
|
|
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
|
|
U_BOOT_ITS_DEPS += u-boot
|
|
endif
|
|
$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
|
|
$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
|
|
$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
|
|
endif
|
|
endif
|
|
|
|
ifdef CONFIG_SPL_LOAD_FIT
|
|
MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
|
|
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
|
|
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
|
|
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
|
|
else
|
|
MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
|
|
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
|
|
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
|
|
MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
|
|
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
|
|
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
|
|
u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
|
|
CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
|
|
endif
|
|
|
|
MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
|
|
|
|
MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
|
|
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
|
|
|
|
MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
|
|
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
|
|
$(if $(KEYDIR),-k $(KEYDIR))
|
|
|
|
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
|
|
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
|
|
|
|
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
|
|
UBOOT_BIN := u-boot-with-dtb.bin
|
|
else
|
|
UBOOT_BIN := u-boot.bin
|
|
endif
|
|
|
|
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
|
|
$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
|
|
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
|
|
,$(UBOOT_BIN)) FORCE
|
|
$(call if_changed,mkimage)
|
|
$(BOARD_SIZE_CHECK)
|
|
|
|
ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
|
|
MKIMAGEFLAGS_u-boot.itb =
|
|
else
|
|
MKIMAGEFLAGS_u-boot.itb = -E
|
|
endif
|
|
|
|
u-boot.itb: u-boot-nodtb.bin \
|
|
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
|
|
$(U_BOOT_ITS) FORCE
|
|
$(call if_changed,mkfitimage)
|
|
$(BOARD_SIZE_CHECK)
|
|
|
|
u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
u-boot.sha1: u-boot.bin
|
|
tools/ubsha1 u-boot.bin
|
|
|
|
u-boot.dis: u-boot
|
|
$(OBJDUMP) -d $< > $@
|
|
|
|
ifneq ($(CONFIG_SPL_PAYLOAD),)
|
|
SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
|
|
else
|
|
SPL_PAYLOAD := u-boot.bin
|
|
endif
|
|
|
|
SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
|
|
|
|
OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
|
|
--pad-to=$(CONFIG_SPL_PAD_TO)
|
|
u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
|
|
MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
|
|
tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,cat)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
|
|
MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
|
|
|
|
lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
|
|
|
|
lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
|
|
$(call if_changed,objcopy)
|
|
|
|
lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
|
|
$(call if_changed,cat)
|
|
|
|
CLEAN_FILES += lpc32xx-*
|
|
endif
|
|
|
|
OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
|
|
--pad-to=$(CONFIG_TPL_PAD_TO)
|
|
tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
SPL: spl/u-boot-spl.bin FORCE
|
|
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
|
|
|
|
ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
|
|
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
|
|
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
|
|
endif
|
|
|
|
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
|
|
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
|
|
|
|
MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
|
|
|
|
u-boot.ubl: u-boot-with-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
|
|
$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
|
|
-T aisimage -e $(CONFIG_SPL_TEXT_BASE)
|
|
spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
|
|
u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
|
|
$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
|
|
u-boot.sb: u-boot.bin spl/u-boot-spl.bin
|
|
$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
|
|
|
|
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
|
|
# Both images are created using mkimage (crc etc), so that the ROM
|
|
# bootloader can check its integrity. Padding needs to be done to the
|
|
# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
|
|
# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
|
|
# The resulting image containing both U-Boot images is called u-boot.spr
|
|
MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
|
|
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
|
|
spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
|
|
--gap-fill=0xff
|
|
u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
ifneq ($(CONFIG_ARCH_SOCFPGA),)
|
|
quiet_cmd_socboot = SOCBOOT $@
|
|
cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
|
|
spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
|
|
u-boot.img > $@ || rm -f $@
|
|
u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
|
|
$(call if_changed,socboot)
|
|
endif
|
|
|
|
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
|
|
u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
|
|
$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
|
|
$(call if_changed,binman)
|
|
|
|
ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
|
|
OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
|
|
u-boot-br.bin: u-boot FORCE
|
|
$(call if_changed,objcopy)
|
|
endif
|
|
endif
|
|
|
|
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
|
|
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
|
|
# the middle. This is handled by binman based on an image description in the
|
|
# board's device tree.
|
|
ifneq ($(CONFIG_X86_RESET_VECTOR),)
|
|
rom: u-boot.rom FORCE
|
|
|
|
refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
|
|
$(call if_changed,copy)
|
|
|
|
quiet_cmd_ldr = LD $@
|
|
cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
|
|
$(filter-out FORCE,$^) -o $@
|
|
|
|
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
|
|
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
|
|
$(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
|
|
$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
|
|
$(call if_changed,binman)
|
|
|
|
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
|
|
u-boot-x86-16bit.bin: u-boot FORCE
|
|
$(call if_changed,objcopy)
|
|
endif
|
|
|
|
ifneq ($(CONFIG_ARCH_SUNXI),)
|
|
ifeq ($(CONFIG_ARM64),)
|
|
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
|
|
$(call if_changed,binman)
|
|
else
|
|
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
|
|
$(call if_changed,cat)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(CONFIG_TEGRA),)
|
|
ifneq ($(CONFIG_BINMAN),)
|
|
# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
|
|
%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
|
|
spl/%-spl %.bin FORCE
|
|
$(call if_changed,binman)
|
|
else
|
|
OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
|
|
u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
|
|
u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
|
|
$(call if_changed,copy)
|
|
endif # binman
|
|
endif
|
|
|
|
OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
|
|
u-boot-app.efi: u-boot FORCE
|
|
$(call if_changed,zobjcopy)
|
|
|
|
u-boot.bin.o: u-boot.bin FORCE
|
|
$(call if_changed,efipayload)
|
|
|
|
u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
|
|
$(call if_changed_dep,cpp_lds)
|
|
|
|
# Rule to link the EFI payload which contains a stub and a U-Boot binary
|
|
quiet_cmd_u-boot_payload ?= LD $@
|
|
cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
|
|
-T u-boot-payload.lds arch/x86/cpu/call32.o \
|
|
lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
|
|
$(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
|
|
|
|
u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
|
|
$(call if_changed,u-boot_payload)
|
|
|
|
OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
|
|
u-boot-payload.efi: u-boot-payload FORCE
|
|
$(call if_changed,zobjcopy)
|
|
|
|
u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
|
|
$(call if_changed,cat)
|
|
|
|
#Add a target to create boot binary having SPL binary in PBI format
|
|
#concatenated with u-boot binary. It is need by PowerPC SoC having
|
|
#internal SRAM <= 512KB.
|
|
MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
|
|
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
|
|
-A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
|
|
|
|
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
|
|
ifeq ($(ARCH),arm)
|
|
UBOOT_BINLOAD := u-boot.img
|
|
else
|
|
ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
|
|
UBOOT_BINLOAD := u-boot-with-dtb.bin
|
|
else
|
|
UBOOT_BINLOAD := u-boot.bin
|
|
endif
|
|
endif
|
|
|
|
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
|
|
--gap-fill=0xff
|
|
|
|
u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
# PPC4xx needs the SPL at the end of the image, since the reset vector
|
|
# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
|
|
# and need to introduce a new build target with the full blown U-Boot
|
|
# at the start padded up to the start of the SPL image. And then concat
|
|
# the SPL image to the end.
|
|
|
|
OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
|
|
--pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
|
|
u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
|
|
$(call if_changed,pad_cat)
|
|
|
|
# Create a new ELF from a raw binary file.
|
|
ifndef PLATFORM_ELFENTRY
|
|
PLATFORM_ELFENTRY = "_start"
|
|
endif
|
|
quiet_cmd_u-boot-elf ?= LD $@
|
|
cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
|
|
--defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
|
|
-Ttext=$(CONFIG_SYS_TEXT_BASE)
|
|
u-boot.elf: u-boot.bin
|
|
$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
|
|
$(call if_changed,u-boot-elf)
|
|
|
|
# MediaTek's ARM-based u-boot needs a header to contains its load address
|
|
# which is parsed by the BootROM.
|
|
# If the SPL build is enabled, the header will be added to the spl binary,
|
|
# and the spl binary and the u-boot.img will be combined into one file.
|
|
# Otherwise the header will be added to the u-boot.bin directly.
|
|
|
|
ifeq ($(CONFIG_SPL),y)
|
|
spl/u-boot-spl-mtk.bin: spl/u-boot-spl
|
|
|
|
u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
|
|
$(call if_changed,binman)
|
|
else
|
|
MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
|
|
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
|
|
-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
|
|
|
|
u-boot-mtk.bin: u-boot.bin FORCE
|
|
$(call if_changed,mkimage)
|
|
endif
|
|
|
|
ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
|
|
|
|
# Rule to link u-boot
|
|
# May be overridden by arch/$(ARCH)/config.mk
|
|
quiet_cmd_u-boot__ ?= LD $@
|
|
cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
|
|
-T u-boot.lds $(u-boot-init) \
|
|
--start-group $(u-boot-main) --end-group \
|
|
$(PLATFORM_LIBS) -Map u-boot.map; \
|
|
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
|
|
|
|
quiet_cmd_smap = GEN common/system_map.o
|
|
cmd_smap = \
|
|
smap=`$(call SYSTEM_MAP,u-boot) | \
|
|
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
|
|
$(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
|
|
-c $(srctree)/common/system_map.c -o common/system_map.o
|
|
|
|
u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
|
|
+$(call if_changed,u-boot__)
|
|
ifeq ($(CONFIG_KALLSYMS),y)
|
|
$(call cmd,smap)
|
|
$(call cmd,u-boot__) common/system_map.o
|
|
endif
|
|
|
|
ifeq ($(CONFIG_RISCV),y)
|
|
@tools/prelink-riscv $@ 0
|
|
endif
|
|
|
|
quiet_cmd_sym ?= SYM $@
|
|
cmd_sym ?= $(OBJDUMP) -t $< > $@
|
|
u-boot.sym: u-boot FORCE
|
|
$(call if_changed,sym)
|
|
|
|
# The actual objects are generated when descending,
|
|
# make sure no implicit rule kicks in
|
|
$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
|
|
|
|
# Handle descending into subdirectories listed in $(vmlinux-dirs)
|
|
# Preset locale variables to speed up the build process. Limit locale
|
|
# tweaks to this spot to avoid wrong language settings when running
|
|
# make menuconfig etc.
|
|
# Error messages still appears in the original language
|
|
|
|
PHONY += $(u-boot-dirs)
|
|
$(u-boot-dirs): prepare scripts
|
|
$(Q)$(MAKE) $(build)=$@
|
|
|
|
tools: prepare
|
|
# The "tools" are needed early
|
|
$(filter-out tools, $(u-boot-dirs)): tools
|
|
# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
|
|
# is "yes"), so compile examples after U-Boot is compiled.
|
|
examples: $(filter-out examples, $(u-boot-dirs))
|
|
|
|
define filechk_uboot.release
|
|
echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
|
|
endef
|
|
|
|
# Store (new) UBOOTRELEASE string in include/config/uboot.release
|
|
include/config/uboot.release: include/config/auto.conf FORCE
|
|
$(call filechk,uboot.release)
|
|
|
|
|
|
# Things we need to do before we recursively start building the kernel
|
|
# or the modules are listed in "prepare".
|
|
# A multi level approach is used. prepareN is processed before prepareN-1.
|
|
# archprepare is used in arch Makefiles and when processed asm symlink,
|
|
# version.h and scripts_basic is processed / created.
|
|
|
|
# Listed in dependency order
|
|
PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
|
|
|
|
# prepare3 is used to check if we are building in a separate output directory,
|
|
# and if so do:
|
|
# 1) Check that make has not been executed in the kernel src $(srctree)
|
|
prepare3: include/config/uboot.release
|
|
ifneq ($(KBUILD_SRC),)
|
|
@$(kecho) ' Using $(srctree) as source for U-Boot'
|
|
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
|
|
echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
|
|
echo >&2 " in the '$(srctree)' directory.";\
|
|
/bin/false; \
|
|
fi;
|
|
endif
|
|
|
|
# prepare2 creates a makefile if using a separate output directory
|
|
prepare2: prepare3 outputmakefile cfg
|
|
|
|
prepare1: prepare2 $(version_h) $(timestamp_h) \
|
|
include/config/auto.conf
|
|
ifeq ($(wildcard $(LDSCRIPT)),)
|
|
@echo >&2 " Could not find linker script."
|
|
@/bin/false
|
|
endif
|
|
|
|
ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
|
|
prepare1: $(defaultenv_h)
|
|
endif
|
|
|
|
archprepare: prepare1 scripts_basic
|
|
|
|
prepare0: archprepare FORCE
|
|
$(Q)$(MAKE) $(build)=.
|
|
|
|
# All the preparing..
|
|
prepare: prepare0
|
|
|
|
# Generate some files
|
|
# ---------------------------------------------------------------------------
|
|
|
|
define filechk_version.h
|
|
(echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
|
|
echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
|
|
echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
|
|
echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
|
|
endef
|
|
|
|
# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
|
|
# The BSD date on the other hand behaves different and would produce errors
|
|
# with the misused '-d' switch. Respect that and search a working date with
|
|
# well known pre- and suffixes for the GNU variant of date.
|
|
define filechk_timestamp.h
|
|
(if test -n "$${SOURCE_DATE_EPOCH}"; then \
|
|
SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
|
|
DATE=""; \
|
|
for date in gdate date.gnu date; do \
|
|
$${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
|
|
done; \
|
|
if test -n "$${DATE}"; then \
|
|
LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
|
|
LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
|
|
LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
|
|
LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
|
|
LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
|
|
else \
|
|
return 42; \
|
|
fi; \
|
|
else \
|
|
LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
|
|
LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
|
|
LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
|
|
LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
|
|
LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
|
|
fi)
|
|
endef
|
|
|
|
define filechk_defaultenv.h
|
|
(grep -v '^#' | \
|
|
grep -v '^$$' | \
|
|
tr '\n' '\0' | \
|
|
sed -e 's/\\\x0/\n/g' | \
|
|
xxd -i ; echo ", 0x00" ; )
|
|
endef
|
|
|
|
$(version_h): include/config/uboot.release FORCE
|
|
$(call filechk,version.h)
|
|
|
|
$(timestamp_h): $(srctree)/Makefile FORCE
|
|
$(call filechk,timestamp.h)
|
|
|
|
$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
|
|
$(call filechk,defaultenv.h)
|
|
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_cpp_lds = LDS $@
|
|
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
|
|
-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
|
|
|
|
u-boot.lds: $(LDSCRIPT) prepare FORCE
|
|
$(call if_changed_dep,cpp_lds)
|
|
|
|
spl/u-boot-spl.bin: spl/u-boot-spl
|
|
@:
|
|
$(SPL_SIZE_CHECK)
|
|
|
|
spl/u-boot-spl: tools prepare \
|
|
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
|
|
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
|
|
$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
|
|
|
|
spl/sunxi-spl.bin: spl/u-boot-spl
|
|
@:
|
|
|
|
spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
|
|
@:
|
|
|
|
spl/u-boot-spl.sfp: spl/u-boot-spl
|
|
@:
|
|
|
|
spl/boot.bin: spl/u-boot-spl
|
|
@:
|
|
|
|
tpl/u-boot-tpl.bin: tools prepare \
|
|
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
|
|
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
|
|
|
|
TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
|
|
|
|
FIND := find
|
|
FINDFLAGS := -L
|
|
|
|
tags ctags:
|
|
ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
|
|
-name '*.[chS]' -print`
|
|
ln -s ctags tags
|
|
|
|
etags:
|
|
etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
|
|
-name '*.[chS]' -print`
|
|
cscope:
|
|
$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
|
|
cscope.files
|
|
cscope -b -q -k
|
|
|
|
SYSTEM_MAP = \
|
|
$(NM) $1 | \
|
|
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
|
|
LC_ALL=C sort
|
|
System.map: u-boot
|
|
@$(call SYSTEM_MAP,$<) > $@
|
|
|
|
#########################################################################
|
|
|
|
# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
|
|
# R_AARCH64_RELATIVE (64-bit).
|
|
checkarmreloc: u-boot
|
|
@RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
|
|
grep R_A | sort -u`"; \
|
|
if test "$$RELOC" != "R_ARM_RELATIVE" -a \
|
|
"$$RELOC" != "R_AARCH64_RELATIVE"; then \
|
|
echo "$< contains unexpected relocations: $$RELOC"; \
|
|
false; \
|
|
fi
|
|
|
|
envtools: scripts_basic $(version_h) $(timestamp_h)
|
|
$(Q)$(MAKE) $(build)=tools/env
|
|
|
|
tools-only: export TOOLS_ONLY=y
|
|
tools-only: scripts_basic $(version_h) $(timestamp_h)
|
|
$(Q)$(MAKE) $(build)=tools
|
|
|
|
tools-all: export HOST_TOOLS_ALL=y
|
|
tools-all: envtools tools ;
|
|
|
|
cross_tools: export CROSS_BUILD_TOOLS=y
|
|
cross_tools: tools ;
|
|
|
|
.PHONY : CHANGELOG
|
|
CHANGELOG:
|
|
git log --no-merges U-Boot-1_1_5.. | \
|
|
unexpand -a | sed -e 's/\s\s*$$//' > $@
|
|
|
|
#########################################################################
|
|
|
|
###
|
|
# Cleaning is done on three levels.
|
|
# make clean Delete most generated files
|
|
# Leave enough to build external modules
|
|
# make mrproper Delete the current configuration, and all generated files
|
|
# make distclean Remove editor backup files, patch leftover files and the like
|
|
|
|
# Directories & files removed with 'make clean'
|
|
CLEAN_DIRS += $(MODVERDIR) \
|
|
$(foreach d, spl tpl, $(patsubst %,$d/%, \
|
|
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
|
|
|
|
CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
|
|
boot* u-boot* MLO* SPL System.map fit-dtb.blob*
|
|
|
|
# Directories & files removed with 'make mrproper'
|
|
MRPROPER_DIRS += include/config include/generated spl tpl \
|
|
.tmp_objdiff
|
|
MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
|
|
ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
|
|
drivers/video/fonts/*.S
|
|
|
|
# clean - Delete most, but leave enough to build external modules
|
|
#
|
|
clean: rm-dirs := $(CLEAN_DIRS)
|
|
clean: rm-files := $(CLEAN_FILES)
|
|
|
|
clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
|
|
|
|
clean-dirs := $(addprefix _clean_, $(clean-dirs))
|
|
|
|
PHONY += $(clean-dirs) clean archclean
|
|
$(clean-dirs):
|
|
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
|
|
|
|
clean: $(clean-dirs)
|
|
$(call cmd,rmdirs)
|
|
$(call cmd,rmfiles)
|
|
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
|
|
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
|
|
-o -name '*.ko.*' -o -name '*.su' \
|
|
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
|
|
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
|
|
-o -name '*.symtypes' -o -name 'modules.order' \
|
|
-o -name modules.builtin -o -name '.tmp_*.o.*' \
|
|
-o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
|
|
-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
|
|
-type f -print | xargs rm -f \
|
|
bl31.c bl31.elf bl31_*.bin image.map tispl.bin*
|
|
|
|
# mrproper - Delete all generated files, including .config
|
|
#
|
|
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
|
|
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
|
|
mrproper-dirs := $(addprefix _mrproper_,scripts)
|
|
|
|
PHONY += $(mrproper-dirs) mrproper archmrproper
|
|
$(mrproper-dirs):
|
|
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
|
|
|
|
mrproper: clean $(mrproper-dirs)
|
|
$(call cmd,rmdirs)
|
|
$(call cmd,rmfiles)
|
|
@rm -f arch/*/include/asm/arch
|
|
|
|
# distclean
|
|
#
|
|
PHONY += distclean
|
|
|
|
distclean: mrproper
|
|
@find $(srctree) $(RCS_FIND_IGNORE) \
|
|
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
|
|
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
|
|
-o -name '.*.rej' -o -name '*%' -o -name 'core' \
|
|
-o -name '*.pyc' \) \
|
|
-type f -print | xargs rm -f
|
|
@rm -f boards.cfg CHANGELOG
|
|
|
|
backup:
|
|
F=`basename $(srctree)` ; cd .. ; \
|
|
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
|
|
|
|
help:
|
|
@echo 'Cleaning targets:'
|
|
@echo ' clean - Remove most generated files but keep the config'
|
|
@echo ' mrproper - Remove all generated files + config + various backup files'
|
|
@echo ' distclean - mrproper + remove editor backup and patch files'
|
|
@echo ''
|
|
@echo 'Configuration targets:'
|
|
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
|
|
@echo ''
|
|
@echo 'Test targets:'
|
|
@echo ''
|
|
@echo ' check - Run all automated tests that use sandbox'
|
|
@echo ' qcheck - Run quick automated tests that use sandbox'
|
|
@echo ''
|
|
@echo 'Other generic targets:'
|
|
@echo ' all - Build all necessary images depending on configuration'
|
|
@echo ' tests - Build U-Boot for sandbox and run tests'
|
|
@echo '* u-boot - Build the bare u-boot'
|
|
@echo ' dir/ - Build all files in dir and below'
|
|
@echo ' dir/file.[oisS] - Build specified target only'
|
|
@echo ' dir/file.lst - Build specified mixed source/assembly target only'
|
|
@echo ' (requires a recent binutils and recent build (System.map))'
|
|
@echo ' tags/ctags - Generate ctags file for editors'
|
|
@echo ' etags - Generate etags file for editors'
|
|
@echo ' cscope - Generate cscope index'
|
|
@echo ' ubootrelease - Output the release version string (use with make -s)'
|
|
@echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
|
|
@echo " cfg - Don't build, just create the .cfg files"
|
|
@echo " envtools - Build only the target-side environment tools"
|
|
@echo ''
|
|
@echo 'Static analysers'
|
|
@echo ' checkstack - Generate a list of stack hogs'
|
|
@echo ' coccicheck - Execute static code analysis with Coccinelle'
|
|
@echo ''
|
|
@echo 'Documentation targets:'
|
|
@$(MAKE) -f $(srctree)/doc/Makefile dochelp
|
|
@echo ''
|
|
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
|
|
@echo ' make V=2 [targets] 2 => give reason for rebuild of target'
|
|
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
|
|
@echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
|
|
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
|
|
@echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
|
|
@echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
|
|
@echo ' 1: warnings which may be relevant and do not occur too often'
|
|
@echo ' 2: warnings which occur quite often but may still be relevant'
|
|
@echo ' 3: more obscure warnings, can most likely be ignored'
|
|
@echo ' Multiple levels can be combined with W=12 or W=123'
|
|
@echo ''
|
|
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
|
|
@echo 'For further info see the ./README file'
|
|
|
|
tests check:
|
|
$(srctree)/test/run
|
|
|
|
qcheck:
|
|
$(srctree)/test/run quick
|
|
|
|
# Documentation targets
|
|
# ---------------------------------------------------------------------------
|
|
DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
|
|
linkcheckdocs dochelp refcheckdocs
|
|
PHONY += $(DOC_TARGETS)
|
|
$(DOC_TARGETS): scripts_basic FORCE
|
|
$(Q)$(MAKE) $(build)=doc $@
|
|
|
|
endif #ifeq ($(config-targets),1)
|
|
endif #ifeq ($(mixed-targets),1)
|
|
|
|
PHONY += checkstack ubootrelease ubootversion
|
|
|
|
checkstack:
|
|
$(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
|
|
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
|
|
|
|
ubootrelease:
|
|
@echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
|
|
|
|
ubootversion:
|
|
@echo $(UBOOTVERSION)
|
|
|
|
# Single targets
|
|
# ---------------------------------------------------------------------------
|
|
# Single targets are compatible with:
|
|
# - build with mixed source and output
|
|
# - build with separate output dir 'make O=...'
|
|
# - external modules
|
|
#
|
|
# target-dir => where to store outputfile
|
|
# build-dir => directory in kernel source tree to use
|
|
|
|
ifeq ($(KBUILD_EXTMOD),)
|
|
build-dir = $(patsubst %/,%,$(dir $@))
|
|
target-dir = $(dir $@)
|
|
else
|
|
zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
|
|
build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
|
|
target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
|
|
endif
|
|
|
|
%.s: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.i: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.o: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.lst: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.s: %.S prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.o: %.S prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
%.symtypes: %.c prepare scripts FORCE
|
|
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
|
|
|
|
# Modules
|
|
/: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir)
|
|
%/: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir)
|
|
%.ko: prepare scripts FORCE
|
|
$(cmd_crmodverdir)
|
|
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
|
|
$(build)=$(build-dir) $(@:.ko=.o)
|
|
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
|
|
|
|
quiet_cmd_genenv = GENENV $@
|
|
cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
|
|
sed --in-place -e 's/\x00/\x0A/g' $@
|
|
|
|
u-boot-initial-env: u-boot.bin
|
|
$(call if_changed,genenv)
|
|
|
|
# Consistency checks
|
|
# ---------------------------------------------------------------------------
|
|
|
|
PHONY += coccicheck
|
|
|
|
coccicheck:
|
|
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
|
|
|
|
# FIXME Should go into a make.lib or something
|
|
# ===========================================================================
|
|
|
|
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
|
|
cmd_rmdirs = rm -rf $(rm-dirs)
|
|
|
|
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
|
|
cmd_rmfiles = rm -f $(rm-files)
|
|
|
|
# read all saved command lines
|
|
|
|
targets := $(wildcard $(sort $(targets)))
|
|
cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
|
|
|
|
ifneq ($(cmd_files),)
|
|
$(cmd_files): ; # Do not try to update included dependency files
|
|
include $(cmd_files)
|
|
endif
|
|
|
|
endif # skip-makefile
|
|
|
|
PHONY += FORCE
|
|
FORCE:
|
|
|
|
# Declare the contents of the .PHONY variable as phony. We keep that
|
|
# information in a variable so we can use it in if_changed and friends.
|
|
.PHONY: $(PHONY)
|