u-boot/include/configs/sh7752evb.h
Marek Vasut ccce3acfe7 sh: tmu: Clean up CONFIG_SH_TMU_CLK_FREQ
The R-Car Gen2 feeds the TMU with CONFIG_SYS_CLK_FREQ / 2,
while the old SH parts use CONFIG_SYS_CLK_FREQ directly.
Just put this into the TMU implementation and drop the
CONFIG_SH_TMU_CLK_FREQ config option.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-09-15 03:19:07 +02:00

80 lines
2.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the sh7752evb board
*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
#ifndef __SH7752EVB_H
#define __SH7752EVB_H
#define CONFIG_CPU_SH7752 1
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#define SH7752EVB_SDRAM_BASE (0x40000000)
#define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024)
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
480 * 1024 * 1024)
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (SH7752EVB_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (SH7752EVB_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
128 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 18
#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
#define CONFIG_SH_ETHER_USE_GETHER 1
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII
#define CONFIG_PHY_VITESSE
#define SH7752EVB_ETHERNET_MAC_BASE_SPI 0x00090000
#define SH7752EVB_SPI_SECTOR_SIZE (64 * 1024)
#define SH7752EVB_ETHERNET_MAC_BASE SH7752EVB_ETHERNET_MAC_BASE_SPI
#define SH7752EVB_ETHERNET_MAC_SIZE 17
#define SH7752EVB_ETHERNET_NUM_CH 2
/* SPI */
#define CONFIG_SH_SPI_BASE 0xfe002000
/* MMCIF */
#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
#define CONFIG_SH_MMCIF_CLK 48000000
/* ENV setting */
#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
#define CONFIG_EXTRA_ENV_SETTINGS \
"netboot=bootp; bootm\0"
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 48000000
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#endif /* __SH7752EVB_H */