u-boot/include/configs/p2371-2180.h
Stephen Warren bf51982539 ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT
This option is no longer used now that DM_USB is enabled.

Fixes: 534f9d3fef ("dm: tegra: usb: Move USB to driver model")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-18 10:02:19 -07:00

72 lines
1.5 KiB
C

/*
* (C) Copyright 2013-2015
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _P2371_2180_H
#define _P2371_2180_H
#include <linux/sizes.h>
#include "tegra210-common.h"
/* High-level configuration options */
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"
/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
#define CONFIG_CMD_I2C
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
/* SPI */
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* USB2.0 Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* PCI host support */
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
/* Crystal is 38.4MHz. clk_m runs at half that rate */
#define COUNTER_FREQUENCY 19200000
#endif /* _P2371_2180_H */