u-boot/drivers/usb/host
Stefan Brüns d2ff51b372 usb: dwc2: Add SPLIT INTERRUPT transaction support
CSPLITs for INTERRUPT transactions have to be scheduled in each microframe
following the SSPLIT. INTERRUPT transfers are executed in the next even/
odd microframe depending on the HCCHAR_ODDFRM flag.

As there are no handshakes for INTERRUPT SSPLITs the SSPLIT may have
failed (transport error) without the error being detected by the host
driver. If the last CSPLIT is not received within 4 microframes after the
SSPLIT there was a transaction error and the complete transaction has
to be restarted.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-01-23 16:21:11 +01:00
..
dwc2.c usb: dwc2: Add SPLIT INTERRUPT transaction support 2016-01-23 16:21:11 +01:00
dwc2.h usb: dwc2: Add SPLIT INTERRUPT transaction support 2016-01-23 16:21:11 +01:00
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c USB: ehci-atmel: use pcr to enable or disable clock 2014-09-19 00:11:21 +02:00
ehci-exynos.c usb: host: ehci: samsung: Move hcor initialization after usb phy setup 2015-12-17 21:54:41 +01:00
ehci-faraday.c dm: usb: Drop the EHCI weak functions 2015-04-18 11:11:24 -06:00
ehci-fsl.c drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect 2015-06-07 15:46:02 +02:00
ehci-generic.c usb: add support for generic EHCI devices 2015-12-07 00:14:59 +01:00
ehci-hcd.c usb: Move determination of TT hub address/port into separate function 2015-12-31 16:16:29 +01:00
ehci-marvell.c usb: ehci-marvell.c: Add DM support 2015-10-21 02:25:01 +02:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c dm: usb: Drop the EHCI weak functions 2015-04-18 11:11:24 -06:00
ehci-mx6.c imx: usb: ehci-mx6: wait_for_bit to check reg status 2015-08-19 22:30:20 +02:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci: mxs: Add board-specific callbacks 2014-09-29 09:02:16 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c dm: usb: Convert echi-pci to use new DM PCI API 2016-01-12 10:19:09 -07:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-rmobile.c usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT 2014-11-07 16:32:02 +01:00
ehci-spear.c usb: spear: Add support for both SPEAr600 EHCI controllers 2015-08-19 22:30:20 +02:00
ehci-sunxi.c sunxi: usb: Rename the sunxi usb driver DM entry 2015-12-07 00:14:59 +01:00
ehci-tegra.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
ehci-uniphier.c ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 2015-05-31 02:53:56 +09:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-vf.c usb: host: ehci-vf: Implement board_usb_phy_mode weak function 2016-01-16 07:06:55 +01:00
ehci-zynq.c ARM: zynq: ehci: Added USB host driver support 2014-05-14 07:43:35 +02:00
ehci.h usb: ehci: remember init mode 2015-09-07 13:41:05 +02:00
isp116x-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Kconfig usb: add support of generic OHCI devices 2015-12-17 21:54:41 +01:00
Makefile usb: add support of generic OHCI devices 2015-12-17 21:54:41 +01:00
ohci-at91.c USB: ohci-at91: use pcr to enable or disable clock 2014-09-19 00:11:20 +02:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-ep93xx.c arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
ohci-generic.c usb: add support of generic OHCI devices 2015-12-17 21:54:41 +01:00
ohci-hcd.c ohci: Add missing cache-flush for hcca area 2015-11-03 17:29:33 +01:00
ohci-lpc32xx.c usb: lpc32xx: add host USB driver 2015-08-18 13:45:57 -04:00
ohci-s3c24xx.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci-sunxi.c sunxi: usb-phy: Never power off the usb ports 2015-08-08 16:26:19 +02:00
ohci.h usb: ohci: enable cache support 2015-08-12 20:47:48 -04:00
r8a66597-hcd.c Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
r8a66597.h usb: Update some EHCI driver licenses to use SPDX 2015-07-21 17:39:38 -06:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
usb-sandbox.c usb: sandbox: Add support for interrupt operations 2015-11-19 20:27:52 -07:00
usb-uclass.c dm: usb: Remove inactive children after a bus scan 2015-11-19 20:27:52 -07:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-dwc3.c usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook 2015-12-07 00:15:00 +01:00
xhci-exynos5.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
xhci-fsl.c usb: xhci: fsl: Removing unused function usb_phy_reset 2015-12-07 00:15:00 +01:00
xhci-keystone.c usb: xhci: keystone: Remove common dwc3 drv functions calls 2015-07-22 08:55:44 +02:00
xhci-mem.c dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00
xhci-omap.c usb: host: xhci-omap: fix build break 2015-12-07 00:14:59 +01:00
xhci-pci.c usb: pci: Add XHCI driver for PCI 2015-02-05 22:16:42 -07:00
xhci-ring.c dm: usb: xhci: Use a function to get xhci_ctrl 2015-04-18 11:11:28 -06:00
xhci-uniphier.c ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 2015-05-31 02:53:56 +09:00
xhci-zynqmp.c usb: xhci: zynqmp: Removing unused function usb_phy_reset 2015-12-07 00:15:00 +01:00
xhci.c dm: Rename dev_get_parentdata() to dev_get_parent_priv() 2015-10-23 09:42:28 -06:00
xhci.h dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00