mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-25 04:33:30 +08:00
079a136c35
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com>
438 lines
14 KiB
C
438 lines
14 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2002
|
|
* Gregory E. Allen, gallen@arlut.utexas.edu
|
|
* Matthew E. Karger, karger@arlut.utexas.edu
|
|
* Applied Research Laboratories, The University of Texas at Austin
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
*
|
|
* Configuration settings for the utx8245 board.
|
|
*
|
|
*/
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC824X 1
|
|
#define CONFIG_MPC8245 1
|
|
#define CONFIG_UTX8245 1
|
|
#define DEBUG 1
|
|
|
|
#define CONFIG_IDENT_STRING " [UTX5] "
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_BOOTDELAY 2
|
|
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
|
|
#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */
|
|
#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
|
|
#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
|
|
#define CONFIG_SERVERIP 10.8.17.105 /* Spree */
|
|
#define CFG_TFTP_LOADADDR 10000
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"kernel_addr=FFA00000\0" \
|
|
"ramdisk_addr=FF800000\0" \
|
|
"u-boot_startaddr=FFB00000\0" \
|
|
"u-boot_endaddr=FFB2FFFF\0" \
|
|
"nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \
|
|
nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \
|
|
"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \
|
|
"smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \
|
|
"fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \
|
|
"nfsboot=run nfsargs;bootm ${kernel_addr}\0" \
|
|
"ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \
|
|
${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \
|
|
${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\
|
|
protect on ${u-boot_startaddr} ${u-boot_endaddr}"
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_CONSOLE
|
|
#define CONFIG_CMD_LOADS
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_DATE
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
/* Print Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
|
|
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI configuration
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_PCI /* include pci support */
|
|
#undef CONFIG_PCI_PNP
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_EEPRO100
|
|
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
|
#define CONFIG_EEPRO100_SROM_WRITE
|
|
|
|
#define PCI_ENET0_IOADDR 0xF0000000
|
|
#define PCI_ENET0_MEMADDR 0xF0000000
|
|
|
|
#define PCI_FIREWIRE_IOADDR 0xF1000000
|
|
#define PCI_FIREWIRE_MEMADDR 0xF1000000
|
|
/*
|
|
#define PCI_ENET0_IOADDR 0xFE000000
|
|
#define PCI_ENET0_MEMADDR 0x80000000
|
|
|
|
#define PCI_FIREWIRE_IOADDR 0x81000000
|
|
#define PCI_FIREWIRE_MEMADDR 0x81000000
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_MAX_RAM_SIZE 0x10000000 /* 256MB */
|
|
/*#define CFG_VERY_BIG_RAM 1 */
|
|
|
|
/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
|
|
* is actually located at FFF00100. Therefore, U-Boot is
|
|
* physically located at 0xFFB0_0000, but is also mirrored at
|
|
* 0xFFF0_0000.
|
|
*/
|
|
#define CFG_RESET_ADDRESS 0xFFF00100
|
|
|
|
#define CFG_EUMB_ADDR 0xFC000000
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
/*#define CFG_DRAM_TEST 1 */
|
|
#define CFG_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */
|
|
#define CFG_MEMTEST_END 0x0ff8ffa7 /* in SDRAM, skips exception */
|
|
/* vectors and U-Boot */
|
|
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area
|
|
*------------------------------------------------------------------*/
|
|
#define CFG_INIT_DATA_SIZE 128 /* Size in bytes reserved for */
|
|
/* initial data */
|
|
#define CFG_INIT_RAM_ADDR 0x40000000
|
|
#define CFG_INIT_RAM_END 0x1000
|
|
#define CFG_INIT_DATA_OFFSET (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
|
|
#define CFG_GBL_DATA_SIZE 128
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
/*--------------------------------------------------------------------
|
|
* NS16550 Configuration
|
|
*------------------------------------------------------------------*/
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
|
|
#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
|
|
# define CFG_NS16550_CLK get_bus_freq(0)
|
|
#else
|
|
# define CFG_NS16550_CLK 33000000
|
|
#endif
|
|
|
|
#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
|
|
#define CFG_NS16550_COM3 0xFF000000
|
|
#define CFG_NS16550_COM4 0xFF000008
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
* For the detail description refer to the MPC8240 user's manual.
|
|
*------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33000000
|
|
#define CFG_HZ 1000
|
|
|
|
/*#define CFG_ETH_DEV_FN 0x7800 */
|
|
/*#define CFG_ETH_IOBASE 0x00104000 */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* I2C Configuration
|
|
*------------------------------------------------------------------*/
|
|
#if 1
|
|
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
#endif
|
|
|
|
#define CONFIG_RTC_PCF8563 1 /* enable I2C support for */
|
|
/* Philips PCF8563 RTC */
|
|
#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Memory Control Configuration Register values
|
|
* - see sec. 4.12 of MPC8245 UM
|
|
*------------------------------------------------------------------*/
|
|
|
|
/**** MCCR1 ****/
|
|
#define CFG_ROMNAL 0
|
|
#define CFG_ROMFAL 10 /* (tacc=70ns)*mem_freq - 2,
|
|
mem_freq = 100MHz */
|
|
|
|
#define CFG_BANK7_ROW 0 /* SDRAM bank 7-0 row address */
|
|
#define CFG_BANK6_ROW 0 /* bit count */
|
|
#define CFG_BANK5_ROW 0
|
|
#define CFG_BANK4_ROW 0
|
|
#define CFG_BANK3_ROW 0
|
|
#define CFG_BANK2_ROW 0
|
|
#define CFG_BANK1_ROW 2
|
|
#define CFG_BANK0_ROW 2
|
|
|
|
/**** MCCR2, refresh interval clock cycles ****/
|
|
#define CFG_REFINT 480 /* 33 MHz SDRAM clock was 480 */
|
|
|
|
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
|
|
#define CFG_BSTOPRE 1023 /* burst to precharge[0..9], */
|
|
/* sets open page interval */
|
|
|
|
/**** MCCR3 ****/
|
|
#define CFG_REFREC 7 /* Refresh to activate interval, trc */
|
|
|
|
/**** MCCR4 ****/
|
|
#define CFG_PRETOACT 2 /* trp */
|
|
#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */
|
|
#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
|
|
#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */
|
|
#define CFG_ACTORW 2 /* trcd min */
|
|
#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
|
|
#define CFG_REGISTERD_TYPE_BUFFER 1
|
|
#define CFG_EXTROM 0 /* we don't need extended ROM space */
|
|
#define CFG_REGDIMM 0
|
|
|
|
/* calculate according to formula in sec. 6-22 of 8245 UM */
|
|
#define CFG_PGMAX 50 /* how long the 8245 retains the */
|
|
/* currently accessed page in memory */
|
|
/* was 45 */
|
|
|
|
#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */
|
|
/* bits 7,6, and 3-0 MUST be 0 */
|
|
|
|
#if 0
|
|
#define CFG_DLL_MAX_DELAY 0x04
|
|
#else
|
|
#define CFG_DLL_MAX_DELAY 0
|
|
#endif
|
|
#if 0 /* need for 33MHz SDRAM */
|
|
#define CFG_DLL_EXTEND 0x80
|
|
#else
|
|
#define CFG_DLL_EXTEND 0
|
|
#endif
|
|
#define CFG_PCI_HOLD_DEL 0x20
|
|
|
|
|
|
/* Memory bank settings.
|
|
* Only bits 20-29 are actually used from these values to set the
|
|
* start/end addresses. The upper two bits will always be 0, and the lower
|
|
* 20 bits will be 0x00000 for a start address, or 0xfffff for an end
|
|
* address. Refer to the MPC8245 user manual.
|
|
*/
|
|
|
|
#define CFG_BANK0_START 0x00000000
|
|
#define CFG_BANK0_END (CFG_MAX_RAM_SIZE/2 - 1)
|
|
#define CFG_BANK0_ENABLE 1
|
|
#define CFG_BANK1_START CFG_MAX_RAM_SIZE/2
|
|
#define CFG_BANK1_END (CFG_MAX_RAM_SIZE - 1)
|
|
#define CFG_BANK1_ENABLE 1
|
|
#define CFG_BANK2_START 0x3ff00000 /* not available in this design */
|
|
#define CFG_BANK2_END 0x3fffffff
|
|
#define CFG_BANK2_ENABLE 0
|
|
#define CFG_BANK3_START 0x3ff00000
|
|
#define CFG_BANK3_END 0x3fffffff
|
|
#define CFG_BANK3_ENABLE 0
|
|
#define CFG_BANK4_START 0x3ff00000
|
|
#define CFG_BANK4_END 0x3fffffff
|
|
#define CFG_BANK4_ENABLE 0
|
|
#define CFG_BANK5_START 0x3ff00000
|
|
#define CFG_BANK5_END 0x3fffffff
|
|
#define CFG_BANK5_ENABLE 0
|
|
#define CFG_BANK6_START 0x3ff00000
|
|
#define CFG_BANK6_END 0x3fffffff
|
|
#define CFG_BANK6_ENABLE 0
|
|
#define CFG_BANK7_START 0x3ff00000
|
|
#define CFG_BANK7_END 0x3fffffff
|
|
#define CFG_BANK7_ENABLE 0
|
|
|
|
/*--------------------------------------------------------------------*/
|
|
/* 4.4 - Output Driver Control Register */
|
|
/*--------------------------------------------------------------------*/
|
|
#define CFG_ODCR 0xe5
|
|
|
|
/*--------------------------------------------------------------------*/
|
|
/* 4.8 - Error Handling Registers */
|
|
/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
|
|
#define CFG_ERRENR1 0x11 /* enable SDRAM refresh overflow error */
|
|
|
|
/* SDRAM 0-256 MB */
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
/*#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* stack in dcache */
|
|
#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
|
|
|
|
|
|
#define CFG_IBAT2L (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT2U (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* PCI memory */
|
|
/*#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
|
|
/*#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
|
|
|
|
/*Flash, config addrs, etc. */
|
|
#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
|
|
#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_FLASH_BASE 0xFF800000
|
|
#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
|
|
|
|
/* NOTE: environment is not EMBEDDED in the u-boot code.
|
|
It's stored in flash in its own separate sector. */
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
#if 1 /* AMD AM29LV033C */
|
|
#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */
|
|
#define CFG_ENV_ADDR 0xFFBF0000 /* flash sector SA63 */
|
|
#define CFG_ENV_SECT_SIZE (64*1024) /* Size of the Environment Sector */
|
|
#else /* AMD AM29LV116D */
|
|
#define CFG_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */
|
|
#define CFG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */
|
|
#define CFG_ENV_SECT_SIZE (8*1024) /* Size of the Environment Sector */
|
|
#endif /* #if */
|
|
|
|
#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE /* Size of the Environment */
|
|
#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
|
|
#undef CFG_RAMBOOT
|
|
#else
|
|
#define CFG_RAMBOOT
|
|
#endif
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 32
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
|
|
#endif /* __CONFIG_H */
|