mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-25 04:33:30 +08:00
80ff4f99b8
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com>
408 lines
13 KiB
C
408 lines
13 KiB
C
/*
|
|
* Copyright (C) 2006 Embedded Planet, LLC.
|
|
*
|
|
* U-Boot configuration for Embedded Planet EP82xxM boards.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_MPC8260
|
|
#define CPU_ID_STR "MPC8270"
|
|
|
|
#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
|
|
/* 256MB SDRAM / 64MB FLASH */
|
|
|
|
#undef DEBUG
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
|
|
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*
|
|
* Select serial console configuration
|
|
*
|
|
* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
|
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
|
* for SCC).
|
|
*/
|
|
#define CONFIG_CONS_ON_SMC /* Console is on SMC */
|
|
#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
|
|
#undef CONFIG_CONS_NONE /* It's not on external UART */
|
|
#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
|
|
|
|
#define CFG_BCSR 0xFA000000
|
|
|
|
/*
|
|
* Select ethernet configuration
|
|
*
|
|
* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
|
|
* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
|
|
* SCC, 1-3 for FCC)
|
|
*
|
|
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
|
|
* must be defined elsewhere (as for the console), or CONFIG_CMD_NET
|
|
* must be unset.
|
|
*/
|
|
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
|
|
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
|
|
#undef CONFIG_ETHER_NONE /* No external Ethernet */
|
|
|
|
#define CONFIG_NET_MULTI
|
|
|
|
#define CONFIG_ETHER_ON_FCC2
|
|
#define CONFIG_ETHER_ON_FCC3
|
|
|
|
#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
|
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
|
|
#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
|
|
#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
|
|
|
|
#define CFG_CPMFCR_RAMTYPE 0
|
|
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
|
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
|
|
|
|
/*
|
|
* GPIO pins used for bit-banged MII communications
|
|
*/
|
|
#define MDIO_PORT 0 /* Not used - implemented in BCSR */
|
|
#define MDIO_ACTIVE (*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
|
|
#define MDIO_TRISTATE (*(vu_char *)(CFG_BCSR + 8) |= 0x04)
|
|
#define MDIO_READ (*(vu_char *)(CFG_BCSR + 8) & 1)
|
|
|
|
#define MDIO(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
|
|
else *(vu_char *)(CFG_BCSR + 8) &= 0xFE
|
|
|
|
#define MDC(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
|
|
else *(vu_char *)(CFG_BCSR + 8) &= 0xFD
|
|
|
|
#define MIIDELAY udelay(1)
|
|
|
|
|
|
#ifndef CONFIG_8260_CLKIN
|
|
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IMMAP
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DTT
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_DIAG
|
|
|
|
|
|
#define CONFIG_ETHADDR 00:10:EC:00:88:65
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_ETH1ADDR 00:10:EC:80:88:65
|
|
#define CONFIG_IPADDR 10.0.0.245
|
|
#define CONFIG_HOSTNAME EP82xxM
|
|
#define CONFIG_SERVERIP 10.0.0.26
|
|
#define CONFIG_GATEWAYIP 10.0.0.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#define CFG_ENV_IN_OWN_SECT 1
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
|
|
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
|
|
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
|
|
#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
|
|
#endif
|
|
|
|
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
|
|
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment
|
|
*----------------------------------------------------------------------*/
|
|
/*
|
|
* Define here the location of the environment variables (FLASH or EEPROM).
|
|
* Note: DENX encourages to use redundant environment in FLASH.
|
|
*/
|
|
#if 1
|
|
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
|
#else
|
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
#define CFG_FLASH_BASE 0xFC000000
|
|
#define CFG_FLASH_CFI
|
|
#define CFG_FLASH_CFI_DRIVER
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
|
#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
|
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */
|
|
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_SECT_SIZE 0x20000
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
|
|
#endif /* CFG_ENV_IS_IN_FLASH */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*----------------------------------------------------------------------*/
|
|
/* EEPROM Configuration */
|
|
#define CFG_EEPROM_SIZE 0x1000
|
|
#define CFG_I2C_EEPROM_ADDR 0x54
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
#ifdef CFG_ENV_IS_IN_EEPROM
|
|
#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
|
|
#define CFG_ENV_OFFSET 0x0
|
|
#endif /* CFG_ENV_IS_IN_EEPROM */
|
|
|
|
/* RTC Configuration */
|
|
#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
|
|
#define CFG_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_M41T11_BASE_YEAR 1900
|
|
|
|
/* I2C SYSMON (LM75) */
|
|
#define CONFIG_DTT_LM75 1
|
|
#define CONFIG_DTT_SENSORS {0}
|
|
#define CFG_DTT_MAX_TEMP 70
|
|
#define CFG_DTT_LOW_TEMP -30
|
|
#define CFG_DTT_HYSTERESIS 3
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* NVRAM Configuration
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CFG_NVRAM_BASE_ADDR 0xFA080000
|
|
#define CFG_NVRAM_SIZE (128*1024)-16
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
/* General PCI */
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#define CONFIG_PCI_BOOTDELAY 0
|
|
|
|
/* PCI Memory map (if different from default map */
|
|
#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
|
|
#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
|
|
#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
|
|
PICMR_PREFETCH_EN)
|
|
|
|
/*
|
|
* These are the windows that allow the CPU to access PCI address space.
|
|
* All three PCI master windows, which allow the CPU to access PCI
|
|
* prefetch, non prefetch, and IO space (see below), must all fit within
|
|
* these windows.
|
|
*/
|
|
|
|
/*
|
|
* Master window that allows the CPU to access PCI Memory (prefetch).
|
|
* This window will be setup with the second set of Outbound ATU registers
|
|
* in the bridge.
|
|
*/
|
|
|
|
#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
|
|
#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
|
|
#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
|
|
#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
|
|
#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
|
|
|
|
/*
|
|
* Master window that allows the CPU to access PCI Memory (non-prefetch).
|
|
* This window will be setup with the second set of Outbound ATU registers
|
|
* in the bridge.
|
|
*/
|
|
|
|
#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
|
|
#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
|
|
#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
|
|
#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
|
|
#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
|
|
|
|
/*
|
|
* Master window that allows the CPU to access PCI IO space.
|
|
* This window will be setup with the first set of Outbound ATU registers
|
|
* in the bridge.
|
|
*/
|
|
|
|
#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
|
|
#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
|
|
#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
|
|
#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
|
|
#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
|
|
|
|
|
|
/* PCIBR0 - for PCI IO*/
|
|
#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
|
|
#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
|
|
/* PCIBR1 - prefetch and non-prefetch regions joined together */
|
|
#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
|
|
#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
|
|
|
|
|
|
#define CFG_DIRECT_FLASH_TFTP
|
|
|
|
#if defined(CONFIG_CMD_JFFS2)
|
|
#define CFG_JFFS2_FIRST_BANK 0
|
|
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
|
|
#define CFG_JFFS2_FIRST_SECTOR 0
|
|
#define CFG_JFFS2_LAST_SECTOR 62
|
|
#define CFG_JFFS2_SORT_FRAGMENTS
|
|
#define CFG_JFFS_CUSTOM_PART
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_I2C)
|
|
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
|
|
#define CFG_I2C_SPEED 100000 /* I2C speed */
|
|
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
|
|
#endif
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
#define CFG_RAMBOOT
|
|
#endif
|
|
|
|
#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */
|
|
|
|
#define CFG_DEFAULT_IMMR 0x00010000
|
|
#define CFG_IMMR 0xF0000000
|
|
|
|
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
|
#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
|
|
/* Hard reset configuration word */
|
|
#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */
|
|
/* No slaves */
|
|
#define CFG_HRCW_SLAVE1 0
|
|
#define CFG_HRCW_SLAVE2 0
|
|
#define CFG_HRCW_SLAVE3 0
|
|
#define CFG_HRCW_SLAVE4 0
|
|
#define CFG_HRCW_SLAVE5 0
|
|
#define CFG_HRCW_SLAVE6 0
|
|
#define CFG_HRCW_SLAVE7 0
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
#define CFG_HID0_INIT 0
|
|
#define CFG_HID0_FINAL 0
|
|
|
|
#define CFG_HID2 0
|
|
|
|
#define CFG_SIUMCR 0x02610000
|
|
#define CFG_SYPCR 0xFFFF0689
|
|
#define CFG_BCR 0x8080E000
|
|
#define CFG_SCCR 0x00000001
|
|
|
|
#define CFG_RMR 0
|
|
#define CFG_TMCNTSC 0x000000C3
|
|
#define CFG_PISCR 0x00000083
|
|
#define CFG_RCCR 0
|
|
|
|
#define CFG_MPTPR 0x0A00
|
|
#define CFG_PSDMR 0xC432246E
|
|
#define CFG_PSRT 0x32
|
|
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_SDRAM_BR (CFG_SDRAM_BASE | 0x00000041)
|
|
#define CFG_SDRAM_OR 0xF0002900
|
|
|
|
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
|
|
#define CFG_OR0_PRELIM 0xFC000882
|
|
#define CFG_BR4_PRELIM (CFG_BCSR | 0x00001001)
|
|
#define CFG_OR4_PRELIM 0xFFF00050
|
|
|
|
#define CFG_RESET_ADDRESS 0xFFF00100
|
|
|
|
#endif /* __CONFIG_H */
|