mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-13 14:53:28 +08:00
9973e3c614
This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
387 lines
9.7 KiB
C
387 lines
9.7 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
static void read_hw_vers (void);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
const uint sdram_table[] = {
|
|
|
|
/* single read (offset 0x00 in upm ram) */
|
|
|
|
0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
|
|
0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
|
|
|
|
/* burst read (offset 0x08 in upm ram) */
|
|
|
|
0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
|
|
0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
|
|
0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
|
|
/* single write (offset 0x18 in upm ram) */
|
|
|
|
0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
|
|
0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
|
|
|
|
/* burst write (offset 0x20 in upm ram) */
|
|
|
|
0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
|
|
0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
|
|
|
|
/* init part1 (offset 0x28 in upm ram) */
|
|
|
|
0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
|
|
0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
|
|
/* refresh (offset 0x30 in upm ram) */
|
|
|
|
0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
|
|
|
|
/* init part2 (offset 0x34 in upm ram) */
|
|
|
|
0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
|
|
0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
|
|
|
|
/* exception (offset 0x3C in upm ram) */
|
|
|
|
0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*
|
|
* Test ETX ID string (ETX_xxx...)
|
|
*
|
|
* Return 1 always.
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
char *s = getenv ("serial#");
|
|
char *e;
|
|
|
|
puts ("Board: ");
|
|
|
|
#ifdef SB_ETX094
|
|
gd->board_type = 0; /* 0 = 2SDRAM-Device */
|
|
#else
|
|
gd->board_type = 1; /* 1 = 1SDRAM-Device */
|
|
#endif
|
|
|
|
if (!s || strncmp (s, "ETX_", 4)) {
|
|
puts ("### No HW ID - assuming ETX_094\n");
|
|
read_hw_vers ();
|
|
return (0);
|
|
}
|
|
|
|
for (e = s; *e; ++e) {
|
|
if (*e == ' ')
|
|
break;
|
|
}
|
|
|
|
for (; s < e; ++s) {
|
|
putc (*s);
|
|
}
|
|
putc ('\n');
|
|
|
|
read_hw_vers ();
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size_b0, size_b1, size8, size9;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CFG_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */
|
|
|
|
/* A3(SDRAM)=0 => Bursttype = Sequential
|
|
* A2-A0(SDRAM)=010 => Burst length = 4
|
|
* A4-A6(SDRAM)=010 => CasLat=2
|
|
*/
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
|
|
* preliminary addresses - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or2 = CFG_OR2_PRELIM;
|
|
memctl->memc_br2 = CFG_BR2_PRELIM;
|
|
|
|
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
|
|
memctl->memc_or3 = CFG_OR3_PRELIM;
|
|
memctl->memc_br3 = CFG_BR3_PRELIM;
|
|
}
|
|
|
|
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */
|
|
memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */
|
|
udelay (1);
|
|
|
|
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
|
|
memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */
|
|
memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */
|
|
udelay (1);
|
|
}
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
* try 8 column mode
|
|
*/
|
|
size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* try 9 column mode
|
|
*/
|
|
size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
if (size8 < size9) { /* leave configuration at 9 columns */
|
|
size_b0 = size9;
|
|
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
|
|
} else { /* back to 8 columns */
|
|
size_b0 = size8;
|
|
memctl->memc_mamr = CFG_MAMR_8COL;
|
|
udelay (500);
|
|
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
|
|
}
|
|
|
|
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
|
|
/*
|
|
* Check Bank 1 Memory Size
|
|
* use current column settings
|
|
* [9 column SDRAM may also be used in 8 column mode,
|
|
* but then only half the real size will be used.]
|
|
*/
|
|
size_b1 =
|
|
dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
|
|
} else {
|
|
size_b1 = 0;
|
|
}
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Adjust refresh rate depending on SDRAM type, both banks
|
|
* For types > 128 MBit leave it at the current (fast) rate
|
|
*/
|
|
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
|
|
/* reduce to 15.6 us (62.4 us / quad) */
|
|
memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /*DIV16 */
|
|
udelay (1000);
|
|
}
|
|
|
|
/*
|
|
* Final mapping: map bigger bank first
|
|
*/
|
|
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
|
|
|
|
memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br3 =
|
|
(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
if (size_b0 > 0) {
|
|
/*
|
|
* Position Bank 0 immediately above Bank 1
|
|
*/
|
|
memctl->memc_or2 =
|
|
((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br2 =
|
|
((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
|
|
+ size_b1;
|
|
} else {
|
|
unsigned long reg;
|
|
|
|
/*
|
|
* No bank 0
|
|
*
|
|
* invalidate bank
|
|
*/
|
|
memctl->memc_br2 = 0;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
}
|
|
|
|
} else { /* SDRAM Bank 0 is bigger - map first */
|
|
|
|
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br2 =
|
|
(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
if (size_b1 > 0) {
|
|
/*
|
|
* Position Bank 1 immediately above Bank 0
|
|
*/
|
|
memctl->memc_or3 =
|
|
((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br3 =
|
|
((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
|
|
+ size_b0;
|
|
} else {
|
|
unsigned long reg;
|
|
|
|
/*
|
|
* No bank 1
|
|
*
|
|
* invalidate bank
|
|
*/
|
|
memctl->memc_br3 = 0;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
}
|
|
}
|
|
|
|
udelay (10000);
|
|
|
|
return (size_b0 + size_b1);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base,
|
|
long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size(base, maxsize));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* HW-ID Table (Bits: 2^9;2^7;2^5) */
|
|
#define HW_ID_0 0x0000
|
|
#define HW_ID_1 0x0020
|
|
#define HW_ID_2 0x0080
|
|
#define HW_ID_3 0x00a0
|
|
#define HW_ID_4 0x0200
|
|
#define HW_ID_5 0x0220
|
|
#define HW_ID_6 0x0280
|
|
#define HW_ID_7 0x02a0
|
|
|
|
void read_hw_vers ()
|
|
{
|
|
unsigned short rd_msk = 0x02A0;
|
|
|
|
/* HW-ID pin-definition */
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
|
|
immr->im_ioport.iop_pddir &= ~(rd_msk);
|
|
immr->im_ioport.iop_pdpar &= ~(rd_msk);
|
|
|
|
/* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
|
|
|
|
/* Check the HW-ID */
|
|
printf ("HW-Version: ");
|
|
switch (immr->im_ioport.iop_pddat & rd_msk) {
|
|
case HW_ID_0:
|
|
printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
|
|
break;
|
|
case HW_ID_1:
|
|
printf ("V0.9 / W50037-Q1-D6-1\n");
|
|
break;
|
|
case HW_ID_2:
|
|
printf ("NOT USED - assuming ID#2\n");
|
|
break;
|
|
case HW_ID_3:
|
|
printf ("NOT USED - assuming ID#3\n");
|
|
break;
|
|
case HW_ID_4:
|
|
printf ("NOT USED - assuming ID#4\n");
|
|
break;
|
|
case HW_ID_5:
|
|
printf ("NOT USED - assuming ID#5\n");
|
|
break;
|
|
case HW_ID_6:
|
|
printf ("NOT USED - assuming ID#6\n");
|
|
break;
|
|
case HW_ID_7:
|
|
printf ("NOT USED - assuming ID#7\n");
|
|
break;
|
|
default:
|
|
printf ("###Error###\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|