u-boot/include/configs/sh7757lcr.h
Joe Hershberger c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00

141 lines
4.0 KiB
C

/*
* Configuation settings for the sh7757lcr board
*
* Copyright (C) 2011 Renesas Solutions Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SH7757LCR_H
#define __SH7757LCR_H
#undef DEBUG
#define CONFIG_CPU_SH7757 1
#define CONFIG_SH7757LCR 1
#define CONFIG_SH7757LCR_DDR_ECC 1
#define CONFIG_SYS_TEXT_BASE 0x8ef80000
#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7757lcr/u-boot.lds"
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SF
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_MD5SUM
#define CONFIG_MD5
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#define SH7757LCR_SDRAM_BASE (0x80000000)
#define SH7757LCR_SDRAM_SIZE (240 * 1024 * 1024)
#define SH7757LCR_SDRAM_ECC_SETTING 0x0f000000 /* 240MByte */
#define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024)
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF2 1
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
224 * 1024 * 1024)
#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (SH7757LCR_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 + 16) * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_NO_FLASH
/* Ether */
#define CONFIG_SH_ETHER 1
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 1
#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
#define CONFIG_PHYLIB
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#define SH7757LCR_ETHERNET_MAC_BASE_SPI 0x000b0000
#define SH7757LCR_SPI_SECTOR_SIZE (64 * 1024)
#define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI
#define SH7757LCR_ETHERNET_MAC_SIZE 17
#define SH7757LCR_ETHERNET_NUM_CH 2
#define CONFIG_BOARD_LATE_INIT
/* Gigabit Ether */
#define SH7757LCR_GIGA_ETHERNET_NUM_CH 2
/* SPI */
#define CONFIG_SH_SPI 1
#define CONFIG_SH_SPI_BASE 0xfe002000
#define CONFIG_SPI_FLASH_STMICRO 1
/* MMCIF */
#define CONFIG_MMC 1
#define CONFIG_GENERIC_MMC 1
#define CONFIG_SH_MMCIF 1
#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
#define CONFIG_SH_MMCIF_CLK 48000000
/* SH7757 board */
#define SH7757LCR_SDRAM_PHYS_TOP 0x40000000
#define SH7757LCR_GRA_OFFSET 0x1f000000
#define SH7757LCR_PCIEBRG_ADDR_B0 0x000a0000
#define SH7757LCR_PCIEBRG_SIZE_B0 (64 * 1024)
#define SH7757LCR_PCIEBRG_ADDR 0x00090000
#define SH7757LCR_PCIEBRG_SIZE (96 * 1024)
/* ENV setting */
#define CONFIG_ENV_IS_EMBEDDED
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_ADDR (0x00080000)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
#define CONFIG_EXTRA_ENV_SETTINGS \
"netboot=bootp; bootm\0"
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 48000000
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV 4
#endif /* __SH7757LCR_H */