mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-29 22:53:24 +08:00
53c45d4e1e
PH1-Pro4 includes both EHCI and xHCI IP cores. Unfortunately, U-Boot cannot enable EHCI and xHCI support simultaneously. Some users may wish Super-Speed connection. Disable CONFIG_USB_EHCI_HCD and enable CONFIG_USB_XHCI_HCD. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
302 lines
8.5 KiB
C
302 lines
8.5 KiB
C
/*
|
|
* Copyright (C) 2012-2015 Panasonic Corporation
|
|
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* U-boot - Common settings for UniPhier Family */
|
|
|
|
#ifndef __CONFIG_UNIPHIER_COMMON_H__
|
|
#define __CONFIG_UNIPHIER_COMMON_H__
|
|
|
|
#if defined(CONFIG_MACH_PH1_PRO4)
|
|
#define CONFIG_DDR_NUM_CH0 2
|
|
#define CONFIG_DDR_NUM_CH1 2
|
|
|
|
/* Physical start address of SDRAM */
|
|
#define CONFIG_SDRAM0_BASE 0x80000000
|
|
#define CONFIG_SDRAM0_SIZE 0x20000000
|
|
#define CONFIG_SDRAM1_BASE 0xa0000000
|
|
#define CONFIG_SDRAM1_SIZE 0x20000000
|
|
#endif
|
|
|
|
#if defined(CONFIG_MACH_PH1_LD4)
|
|
#define CONFIG_DDR_NUM_CH0 1
|
|
#define CONFIG_DDR_NUM_CH1 1
|
|
|
|
/* Physical start address of SDRAM */
|
|
#define CONFIG_SDRAM0_BASE 0x80000000
|
|
#define CONFIG_SDRAM0_SIZE 0x10000000
|
|
#define CONFIG_SDRAM1_BASE 0x90000000
|
|
#define CONFIG_SDRAM1_SIZE 0x10000000
|
|
#endif
|
|
|
|
#if defined(CONFIG_MACH_PH1_SLD8)
|
|
#define CONFIG_DDR_NUM_CH0 1
|
|
#define CONFIG_DDR_NUM_CH1 1
|
|
|
|
/* Physical start address of SDRAM */
|
|
#define CONFIG_SDRAM0_BASE 0x80000000
|
|
#define CONFIG_SDRAM0_SIZE 0x10000000
|
|
#define CONFIG_SDRAM1_BASE 0x90000000
|
|
#define CONFIG_SDRAM1_SIZE 0x10000000
|
|
#endif
|
|
|
|
#define CONFIG_I2C_EEPROM
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/*
|
|
* Support card address map
|
|
*/
|
|
#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
|
|
# define CONFIG_SUPPORT_CARD_BASE 0x03f00000
|
|
# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
|
|
# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000)
|
|
# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
|
|
#endif
|
|
|
|
#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
|
|
# define CONFIG_SUPPORT_CARD_BASE 0x08000000
|
|
# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
|
|
# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630)
|
|
# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE
|
|
#define CONFIG_SYS_NS16550_CLK 12288000
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -2
|
|
#endif
|
|
|
|
/* TODO: move to Kconfig and device tree */
|
|
#if 0
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#endif
|
|
|
|
#define CONFIG_SMC911X
|
|
|
|
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
|
|
#define CONFIG_SMC911X_32_BIT
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* MMU and Cache Setting
|
|
*----------------------------------------------------------------------*/
|
|
|
|
/* Comment out the following to enable L1 cache */
|
|
/* #define CONFIG_SYS_ICACHE_OFF */
|
|
/* #define CONFIG_SYS_DCACHE_OFF */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/* Comment out the following to enable L2 cache */
|
|
#define CONFIG_UNIPHIER_L2CACHE_ON
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#define CONFIG_MISC_INIT_F
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
|
|
#define CONFIG_TIMESTAMP
|
|
|
|
/* FLASH related */
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
/*
|
|
* uncomment the following to disable FLASH related code.
|
|
*/
|
|
/* #define CONFIG_SYS_NO_FLASH */
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
#define CONFIG_SYS_MONITOR_BASE 0
|
|
#define CONFIG_SYS_FLASH_BASE 0
|
|
|
|
/*
|
|
* flash_toggle does not work for out supoort card.
|
|
* We need to use flash_status_poll.
|
|
*/
|
|
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
|
|
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
|
|
|
|
/* serial console configuration */
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_USE_ARCH_MEMSET
|
|
#define CONFIG_USE_ARCH_MEMCPY
|
|
#endif
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
|
#define CONFIG_CMDLINE_EDITING /* add command line history */
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command */
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/*
|
|
* For NAND booting the environment is embedded in the U-Boot image. Please take
|
|
* look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
|
|
*/
|
|
/* #define CONFIG_ENV_IS_IN_NAND */
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_OFFSET 0x0
|
|
/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
|
|
|
|
/* Time clock 1MHz */
|
|
#define CONFIG_SYS_TIMER_RATE 1000000
|
|
|
|
/*
|
|
* By default, ARP timeout is 5 sec.
|
|
* The first ARP request does not seem to work.
|
|
* So we need to retry ARP request anyway.
|
|
* We want to shrink the interval until the second ARP request.
|
|
*/
|
|
#define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 2
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
|
|
|
|
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
|
|
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
|
|
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
|
|
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_FAT_WRITE
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
|
#define CONFIG_AUTOBOOT_KEYED 1
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
|
|
/*
|
|
* Network Configuration
|
|
*/
|
|
#define CONFIG_ETHADDR 00:21:83:24:00:00
|
|
#define CONFIG_SERVERIP 192.168.11.1
|
|
#define CONFIG_IPADDR 192.168.11.10
|
|
#define CONFIG_GATEWAYIP 192.168.11.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
|
|
#define CONFIG_LOADADDR 0x84000000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_BOOTFILE "fit.itb"
|
|
|
|
#define CONFIG_CMDLINE_EDITING /* add command line history */
|
|
|
|
#define CONFIG_BOOTCOMMAND "run $bootmode"
|
|
|
|
#define CONFIG_ROOTPATH "/nfs/root/path"
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs $bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
|
|
"tftpboot; bootm;"
|
|
|
|
#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"image_offset=0x00080000\0" \
|
|
"image_size=0x00f00000\0" \
|
|
"verify=n\0" \
|
|
"nandupdate=nand erase 0 0x100000 &&" \
|
|
"tftpboot u-boot-spl.bin &&" \
|
|
"nand write $loadaddr 0 0x10000 &&" \
|
|
"tftpboot u-boot-dtb.img &&" \
|
|
"nand write $loadaddr 0x10000 0xf0000\0" \
|
|
"norboot=run add_default_bootargs &&" \
|
|
"bootm $image_offset\0" \
|
|
"nandboot=run add_default_bootargs &&" \
|
|
"nand read $loadaddr $image_offset $image_size &&" \
|
|
"bootm\0" \
|
|
"add_default_bootargs=setenv bootargs $bootargs" \
|
|
" console=ttyS0,$baudrate\0" \
|
|
|
|
/* Open Firmware flat tree */
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
#define CONFIG_HAVE_ARM_SECURE
|
|
|
|
/* Memory Size & Mapping */
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE
|
|
|
|
#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
|
|
/* Thre is no memory hole */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
|
|
#else
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x84000000
|
|
|
|
#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
|
|
#define CONFIG_SPL_TEXT_BASE 0x00040000
|
|
#endif
|
|
#if defined(CONFIG_MACH_PH1_PRO4)
|
|
#define CONFIG_SPL_TEXT_BASE 0x00100000
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000)
|
|
#else
|
|
#define CONFIG_SYS_INIT_SP_ADDR ((CONFIG_SYS_TEXT_BASE) - 0x00001000)
|
|
#endif
|
|
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
|
|
#define CONFIG_SPL_BOARD_INIT
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
|
|
|
|
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
|