mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-29 22:53:24 +08:00
b2a6dfe4f8
We do not have to define CONFIG_MPC5xxx in board config headers (and start.S) because it is defined in arch/powerpc/cpu/mpc5xxx/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
434 lines
14 KiB
C
434 lines
14 KiB
C
/*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2006
|
|
* Eric Schumann, Phytec Messatechnik GmbH
|
|
*
|
|
* (C) Copyright 2009
|
|
* Jon Smirl <jonsmirl@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny"
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
High Level Configuration Options
|
|
(easy to change)
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
|
#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */
|
|
#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */
|
|
/* FEC configuration and IDE */
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFFF00000 boot high (standard configuration)
|
|
* 0xFF000000 boot low
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Serial console configuration
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */
|
|
/*define gps port conf. */
|
|
/* register later on to */
|
|
/*enable UART function! */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_PCI
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low */
|
|
#define CONFIG_SYS_LOWBOOT 1
|
|
#endif
|
|
/* RAMBOOT will be defined automatically in memory section */
|
|
|
|
#define CONFIG_JFFS2_CMDLINE
|
|
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
|
|
"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Autobooting
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
|
|
/* even with bootdelay=0 */
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
|
|
"mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"uimage=uImage-pcm030\0" \
|
|
"oftree=oftree-pcm030.dtb\0" \
|
|
"jffs2=root-pcm030.jffs2\0" \
|
|
"uboot=u-boot-pcm030.bin\0" \
|
|
"bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \
|
|
" $(mtdparts) rw\0" \
|
|
"bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \
|
|
" rootfstype=jffs2\0" \
|
|
"bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \
|
|
" ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \
|
|
"$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
|
|
"bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \
|
|
" tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \
|
|
"bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \
|
|
"0xfff40000\0" \
|
|
" cp.b 0x400000 0xff040000 $(filesize)\0" \
|
|
"prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \
|
|
"cp.b 0x400000 0xff200000 $(filesize)\0" \
|
|
"prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \
|
|
" cp.b 0x400000 0xfff40000 $(filesize)\0" \
|
|
"update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \
|
|
" cp.b 0x400000 0xFFF00000 $(filesize)\0" \
|
|
"unlock=yes\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run bcmd_flash"
|
|
|
|
/*--------------------------------------------------------------------------
|
|
IPB Bus clocking configuration.
|
|
---------------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
* -----------------------------------------------------------------------*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
/*---------------------------------------------------------------------------
|
|
I2C configuration
|
|
---------------------------------------------------------------------------*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
/*---------------------------------------------------------------------------
|
|
EEPROM CAT24WC32 configuration
|
|
---------------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
|
|
#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
|
|
#define CONFIG_SYS_EEPROM_SIZE 2048
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
|
|
|
|
/*---------------------------------------------------------------------------
|
|
RTC configuration
|
|
---------------------------------------------------------------------------*/
|
|
#define RTC
|
|
#define CONFIG_RTC_PCF8563 1
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Flash configuration
|
|
---------------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xff000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x01000000
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
|
/* (= chip selects) */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
/*
|
|
* Use also hardware protection. This seems required, as the BDI uses
|
|
* hardware protection. Without this, U-Boot can't work with this sectors,
|
|
* as its protection is software only by default
|
|
*/
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Environment settings
|
|
---------------------------------------------------------------------------*/
|
|
|
|
/* pcm030 ships with environment is EEPROM by default */
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1
|
|
#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
|
|
/*beginning of the EEPROM */
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Memory map
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */
|
|
/* bootloader or debugger config */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
/* Use SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */
|
|
/* area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Ethernet configuration
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
#define CONFIG_PHY_ADDR 0x01
|
|
|
|
/*---------------------------------------------------------------------------
|
|
GPIO configuration
|
|
---------------------------------------------------------------------------*/
|
|
|
|
/* GPIO port configuration
|
|
*
|
|
* Pin mapping:
|
|
*
|
|
* [29:31] = 01x
|
|
* PSC1_0 -> AC97 SDATA out
|
|
* PSC1_1 -> AC97 SDTA in
|
|
* PSC1_2 -> AC97 SYNC out
|
|
* PSC1_3 -> AC97 bitclock out
|
|
* PSC1_4 -> AC97 reset out
|
|
*
|
|
* [25:27] = 001
|
|
* PSC2_0 -> CAN 1 Tx out
|
|
* PSC2_1 -> CAN 1 Rx in
|
|
* PSC2_2 -> CAN 2 Tx out
|
|
* PSC2_3 -> CAN 2 Rx in
|
|
* PSC2_4 -> GPIO (claimed for ATA reset, active low)
|
|
*
|
|
*
|
|
* [20:23] = 1100
|
|
* PSC3_0 -> UART Tx out
|
|
* PSC3_1 -> UART Rx in
|
|
* PSC3_2 -> UART RTS (in/out FIXME)
|
|
* PSC3_3 -> UART CTS (in/out FIXME)
|
|
* PSC3_4 -> LocalPlus Bus CS6 \
|
|
* PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5]
|
|
* PSC3_6 -> dedicated SPI MOSI out (master case)
|
|
* PSC3_7 -> dedicated SPI MISO in (master case)
|
|
* PSC3_8 -> dedicated SPI SS out (master case)
|
|
* PSC3_9 -> dedicated SPI CLK out (master case)
|
|
*
|
|
* [18:19] = 01
|
|
* USB_0 -> USB OE out
|
|
* USB_1 -> USB Tx- out
|
|
* USB_2 -> USB Tx+ out
|
|
* USB_3 -> USB RxD (in/out FIXME)
|
|
* USB_4 -> USB Rx+ in
|
|
* USB_5 -> USB Rx- in
|
|
* USB_6 -> USB PortPower out
|
|
* USB_7 -> USB speed out
|
|
* USB_8 -> USB suspend (in/out FIXME)
|
|
* USB_9 -> USB overcurrent in
|
|
*
|
|
* [17] = 0
|
|
* USB differential mode
|
|
*
|
|
* [16] = 0
|
|
* PCI enabled
|
|
*
|
|
* [12:15] = 0101
|
|
* ETH_0 -> ETH Txen
|
|
* ETH_1 -> ETH TxD0
|
|
* ETH_2 -> ETH TxD1
|
|
* ETH_3 -> ETH TxD2
|
|
* ETH_4 -> ETH TxD3
|
|
* ETH_5 -> ETH Txerr
|
|
* ETH_6 -> ETH MDC
|
|
* ETH_7 -> ETH MDIO
|
|
* ETH_8 -> ETH RxDv
|
|
* ETH_9 -> ETH RxCLK
|
|
* ETH_10 -> ETH Collision
|
|
* ETH_11 -> ETH TxD
|
|
* ETH_12 -> ETH RxD0
|
|
* ETH_13 -> ETH RxD1
|
|
* ETH_14 -> ETH RxD2
|
|
* ETH_15 -> ETH RxD3
|
|
* ETH_16 -> ETH Rxerr
|
|
* ETH_17 -> ETH CRS
|
|
*
|
|
* [9:11] = 101
|
|
* PSC6_0 -> UART RxD in
|
|
* PSC6_1 -> UART CTS (in/out FIXME)
|
|
* PSC6_2 -> UART TxD out
|
|
* PSC6_3 -> UART RTS (in/out FIXME)
|
|
*
|
|
* [2:3/6:7] = 00/11
|
|
* TMR_0 -> ATA_CS0 out
|
|
* TMR_1 -> ATA_CS1 out
|
|
* TMR_2 -> GPIO
|
|
* TMR_3 -> GPIO
|
|
* TMR_4 -> GPIO
|
|
* TMR_5 -> GPIO
|
|
* TMR_6 -> GPIO
|
|
* TMR_7 -> GPIO
|
|
* I2C_0 -> I2C 1 Clock out
|
|
* I2C_1 -> I2C 1 IO in/out
|
|
* I2C_2 -> I2C 2 Clock out
|
|
* I2C_3 -> I2C 2 IO in/out
|
|
*
|
|
* [4] = 1
|
|
* PSC3_5 is used as CS7
|
|
*
|
|
* [5] = 1
|
|
* PSC3_4 is used as CS6
|
|
*
|
|
* [1] = 0
|
|
* gpio_wkup_7 is GPIO
|
|
*
|
|
* [0] = 0
|
|
* gpio_wkup_6 is GPIO
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Miscellaneous configurable options
|
|
-------------------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Various low-level settings
|
|
-----------------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
/* no burst access on the LPB */
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
/* one deadcycle for the 33MHz statemachine */
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333331
|
|
/* one additional waitstate for the 33MHz statemachine */
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
|
|
/*---------------------------------------------------------------------------
|
|
IDE/ATA stuff Supports IDE harddisk
|
|
----------------------------------------------------------------------------*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
#define CONFIG_SYS_ATA_CS_ON_TIMER01
|
|
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
/* Interval between registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
#define CONFIG_ATAPI 1
|
|
|
|
/* we enable IDE and FAT support, so we also need partition support */
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/* pass open firmware flat tree */
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN
|
|
#define OF_SOC "soc5200@f0000000"
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400"
|
|
|
|
#endif /* __CONFIG_H */
|