mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 05:34:30 +08:00
41575d8e4c
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
309 lines
7.6 KiB
C
309 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Intel Broadwell I2S driver
|
|
*
|
|
* Copyright 2019 Google LLC
|
|
*
|
|
* Modified from dc i2s/broadwell/broadwell.c
|
|
*/
|
|
|
|
#define LOG_CATEGORY UCLASS_I2S
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <i2s.h>
|
|
#include <log.h>
|
|
#include <time.h>
|
|
#include <asm/io.h>
|
|
#include "broadwell_i2s.h"
|
|
|
|
enum {
|
|
BDW_SHIM_START_ADDRESS = 0xfb000,
|
|
BDW_SSP0_START_ADDRESS = 0xfc000,
|
|
BDW_SSP1_START_ADDRESS = 0xfd000,
|
|
};
|
|
|
|
struct broadwell_i2s_priv {
|
|
enum frame_sync_rel_timing_t rel_timing;
|
|
enum frame_sync_pol_t sfrm_polarity;
|
|
enum end_transfer_state_t end_transfer_state;
|
|
enum clock_mode_t sclk_mode;
|
|
uint sclk_dummy_stop; /* 0-31 */
|
|
uint sclk_frame_width; /* 1-38 */
|
|
struct i2s_shim_regs *shim;
|
|
struct broadwell_i2s_regs *regs;
|
|
};
|
|
|
|
static void init_shim_csr(struct broadwell_i2s_priv *priv)
|
|
{
|
|
/*
|
|
* Select SSP clock
|
|
* Turn off low power clock
|
|
* Set PIO mode
|
|
* Stall DSP core
|
|
*/
|
|
clrsetbits_le32(&priv->shim->csr,
|
|
SHIM_CS_S0IOCS | SHIM_CS_LPCS | SHIM_CS_DCS_MASK,
|
|
SHIM_CS_S1IOCS | SHIM_CS_SBCS_SSP1_24MHZ |
|
|
SHIM_CS_SBCS_SSP0_24MHZ | SHIM_CS_SDPM_PIO_SSP1 |
|
|
SHIM_CS_SDPM_PIO_SSP0 | SHIM_CS_STALL |
|
|
SHIM_CS_DCS_DSP32_AF32);
|
|
}
|
|
|
|
static void init_shim_clkctl(struct i2s_uc_priv *uc_priv,
|
|
struct broadwell_i2s_priv *priv)
|
|
{
|
|
u32 clkctl = readl(&priv->shim->clkctl);
|
|
|
|
/* Set 24Mhz mclk, prevent local clock gating, enable SSP0 clock */
|
|
clkctl &= SHIM_CLKCTL_RESERVED;
|
|
clkctl |= SHIM_CLKCTL_MCLK_24MHZ | SHIM_CLKCTL_DCPLCG;
|
|
|
|
/* Enable requested SSP interface */
|
|
if (uc_priv->id)
|
|
clkctl |= SHIM_CLKCTL_SCOE_SSP1 | SHIM_CLKCTL_SFLCGB_SSP1_CGD;
|
|
else
|
|
clkctl |= SHIM_CLKCTL_SCOE_SSP0 | SHIM_CLKCTL_SFLCGB_SSP0_CGD;
|
|
|
|
writel(clkctl, &priv->shim->clkctl);
|
|
}
|
|
|
|
static void init_sscr0(struct i2s_uc_priv *uc_priv,
|
|
struct broadwell_i2s_priv *priv)
|
|
{
|
|
u32 sscr0;
|
|
uint scale;
|
|
|
|
/* Set data size based on BPS */
|
|
if (uc_priv->bitspersample > 16)
|
|
sscr0 = (uc_priv->bitspersample - 16 - 1) << SSP_SSC0_DSS_SHIFT
|
|
| SSP_SSC0_EDSS;
|
|
else
|
|
sscr0 = (uc_priv->bitspersample - 1) << SSP_SSC0_DSS_SHIFT;
|
|
|
|
/* Set network mode, Stereo PSP frame format */
|
|
sscr0 |= SSP_SSC0_MODE_NETWORK |
|
|
SSP_SSC0_FRDC_STEREO |
|
|
SSP_SSC0_FRF_PSP |
|
|
SSP_SSC0_TIM |
|
|
SSP_SSC0_RIM |
|
|
SSP_SSC0_ECS_PCH |
|
|
SSP_SSC0_NCS_PCH |
|
|
SSP_SSC0_ACS_PCH;
|
|
|
|
/* Scale 24MHz MCLK */
|
|
scale = uc_priv->audio_pll_clk / uc_priv->samplingrate / uc_priv->bfs;
|
|
sscr0 |= scale << SSP_SSC0_SCR_SHIFT;
|
|
|
|
writel(sscr0, &priv->regs->sscr0);
|
|
}
|
|
|
|
static void init_sscr1(struct broadwell_i2s_priv *priv)
|
|
{
|
|
u32 sscr1 = readl(&priv->regs->sscr1);
|
|
|
|
sscr1 &= SSP_SSC1_RESERVED;
|
|
|
|
/* Set as I2S master */
|
|
sscr1 |= SSP_SSC1_SCLKDIR_MASTER | SSP_SSC1_SCLKDIR_MASTER;
|
|
|
|
/* Enable TXD tristate behavior for PCH */
|
|
sscr1 |= SSP_SSC1_TTELP | SSP_SSC1_TTE;
|
|
|
|
/* Disable DMA Tx/Rx service request */
|
|
sscr1 |= SSP_SSC1_TSRE | SSP_SSC1_RSRE;
|
|
|
|
/* Clock on during transfer */
|
|
sscr1 |= SSP_SSC1_SCFR;
|
|
|
|
/* Set FIFO thresholds */
|
|
sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_RFT_SHIFT;
|
|
sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_TFT_SHIFT;
|
|
|
|
/* Disable interrupts */
|
|
sscr1 &= ~(SSP_SSC1_EBCEI | SSP_SSC1_TINTE | SSP_SSC1_PINTE);
|
|
sscr1 &= ~(SSP_SSC1_LBM | SSP_SSC1_RWOT);
|
|
|
|
writel(sscr1, &priv->regs->sscr1);
|
|
}
|
|
|
|
static void init_sspsp(struct broadwell_i2s_priv *priv)
|
|
{
|
|
u32 sspsp = readl(&priv->regs->sspsp);
|
|
|
|
sspsp &= SSP_PSP_RESERVED;
|
|
sspsp |= priv->sclk_mode << SSP_PSP_SCMODE_SHIFT;
|
|
sspsp |= (priv->sclk_dummy_stop << SSP_PSP_DMYSTOP_SHIFT) &
|
|
SSP_PSP_DMYSTOP_MASK;
|
|
sspsp |= (priv->sclk_dummy_stop >> 2 << SSP_PSP_EDYMSTOP_SHIFT) &
|
|
SSP_PSP_EDMYSTOP_MASK;
|
|
sspsp |= priv->sclk_frame_width << SSP_PSP_SFRMWDTH_SHIFT;
|
|
|
|
/* Frame Sync Relative Timing */
|
|
if (priv->rel_timing == NEXT_FRMS_AFTER_END_OF_T4)
|
|
sspsp |= SSP_PSP_FSRT;
|
|
else
|
|
sspsp &= ~SSP_PSP_FSRT;
|
|
|
|
/* Serial Frame Polarity */
|
|
if (priv->sfrm_polarity == SSP_FRMS_ACTIVE_HIGH)
|
|
sspsp |= SSP_PSP_SFRMP;
|
|
else
|
|
sspsp &= ~SSP_PSP_SFRMP;
|
|
|
|
/* End Data Transfer State */
|
|
if (priv->end_transfer_state == SSP_END_TRANSFER_STATE_LOW)
|
|
sspsp &= ~SSP_PSP_ETDS;
|
|
else
|
|
sspsp |= SSP_PSP_ETDS;
|
|
|
|
writel(sspsp, &priv->regs->sspsp);
|
|
}
|
|
|
|
static void init_ssp_time_slot(struct broadwell_i2s_priv *priv)
|
|
{
|
|
writel(3, &priv->regs->sstsa);
|
|
writel(3, &priv->regs->ssrsa);
|
|
}
|
|
|
|
static int bdw_i2s_init(struct udevice *dev)
|
|
{
|
|
struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
|
|
|
|
init_shim_csr(priv);
|
|
init_shim_clkctl(uc_priv, priv);
|
|
init_sscr0(uc_priv, priv);
|
|
init_sscr1(priv);
|
|
init_sspsp(priv);
|
|
init_ssp_time_slot(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bdw_i2s_enable(struct broadwell_i2s_priv *priv)
|
|
{
|
|
setbits_le32(&priv->regs->sscr0, SSP_SSC0_SSE);
|
|
setbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
|
|
}
|
|
|
|
static void bdw_i2s_disable(struct broadwell_i2s_priv *priv)
|
|
{
|
|
clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
|
|
clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
|
|
}
|
|
|
|
static int broadwell_i2s_tx_data(struct udevice *dev, void *data,
|
|
uint data_size)
|
|
{
|
|
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
|
|
u32 *ptr = data;
|
|
|
|
log_debug("data=%p, data_size=%x\n", data, data_size);
|
|
if (data_size < SSP_FIFO_SIZE) {
|
|
log_err("Invalid I2S data size\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
/* Enable I2S interface */
|
|
bdw_i2s_enable(priv);
|
|
|
|
/* Transfer data */
|
|
while (data_size > 0) {
|
|
ulong start = timer_get_us() + 100000;
|
|
|
|
/* Write data if transmit FIFO has room */
|
|
if (readl(&priv->regs->sssr) & SSP_SSS_TNF) {
|
|
writel(*ptr++, &priv->regs->ssdr);
|
|
data_size -= sizeof(*ptr);
|
|
} else {
|
|
if ((long)(timer_get_us() - start) > 0) {
|
|
/* Disable I2S interface */
|
|
bdw_i2s_disable(priv);
|
|
log_debug("I2S Transfer Timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable I2S interface */
|
|
bdw_i2s_disable(priv);
|
|
log_debug("done\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int broadwell_i2s_probe(struct udevice *dev)
|
|
{
|
|
struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
|
|
struct udevice *adsp = dev_get_parent(dev);
|
|
u32 bar0, offset;
|
|
int ret;
|
|
|
|
bar0 = dm_pci_read_bar32(adsp, 0);
|
|
if (!bar0) {
|
|
log_debug("Cannot read adsp bar0\n");
|
|
return -EINVAL;
|
|
}
|
|
offset = dev_read_addr_index(dev, 0);
|
|
if (offset == FDT_ADDR_T_NONE) {
|
|
log_debug("Cannot read address index 0\n");
|
|
return -EINVAL;
|
|
}
|
|
uc_priv->base_address = bar0 + offset;
|
|
|
|
/*
|
|
* Hard-code these values. If other settings are required we can add
|
|
* this to the device tree.
|
|
*/
|
|
uc_priv->rfs = 64;
|
|
uc_priv->bfs = 32;
|
|
uc_priv->audio_pll_clk = 24 * 1000 * 1000;
|
|
uc_priv->samplingrate = 48000;
|
|
uc_priv->bitspersample = 16;
|
|
uc_priv->channels = 2;
|
|
uc_priv->id = 0;
|
|
|
|
priv->shim = (struct i2s_shim_regs *)uc_priv->base_address;
|
|
priv->sfrm_polarity = SSP_FRMS_ACTIVE_LOW;
|
|
priv->end_transfer_state = SSP_END_TRANSFER_STATE_LOW;
|
|
priv->sclk_mode = SCLK_MODE_DDF_DSR_ISL;
|
|
priv->rel_timing = NEXT_FRMS_WITH_LSB_PREVIOUS_FRM;
|
|
priv->sclk_dummy_stop = 0;
|
|
priv->sclk_frame_width = 31;
|
|
|
|
offset = dev_read_addr_index(dev, 1 + uc_priv->id);
|
|
if (offset == FDT_ADDR_T_NONE) {
|
|
log_debug("Cannot read address index %d\n", 1 + uc_priv->id);
|
|
return -EINVAL;
|
|
}
|
|
log_debug("bar0=%x, uc_priv->base_address=%x, offset=%x\n", bar0,
|
|
uc_priv->base_address, offset);
|
|
priv->regs = (struct broadwell_i2s_regs *)(bar0 + offset);
|
|
|
|
ret = bdw_i2s_init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2s_ops broadwell_i2s_ops = {
|
|
.tx_data = broadwell_i2s_tx_data,
|
|
};
|
|
|
|
static const struct udevice_id broadwell_i2s_ids[] = {
|
|
{ .compatible = "intel,broadwell-i2s" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(broadwell_i2s) = {
|
|
.name = "broadwell_i2s",
|
|
.id = UCLASS_I2S,
|
|
.of_match = broadwell_i2s_ids,
|
|
.probe = broadwell_i2s_probe,
|
|
.ops = &broadwell_i2s_ops,
|
|
.priv_auto = sizeof(struct broadwell_i2s_priv),
|
|
};
|