mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-03 01:23:29 +08:00
4ce849f535
The wrong phy was being enabled, because it worked and the proper
PHY did not. After the Renesas maintainer made some adjustments
to the device tree, Linux was able to use the proper driver, and
when that device tree was ported to Linux, the ethernet stopped
working due to the lack of rgmii-rxid support. Now that
rgmii-rxid is supported, enable the proper driver to restore
ethernet function.
Fixes: 1eaf61c84d ("arm: dts: beacon-rzg2: Resync device trees with Linux 5.16-rc3")
Signed-off-by: Adam Ford <aford173@gmail.com>
84 lines
2.1 KiB
Plaintext
84 lines
2.1 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_RMOBILE=y
|
|
CONFIG_SYS_TEXT_BASE=0x50000000
|
|
CONFIG_SYS_MALLOC_LEN=0x4000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
|
CONFIG_ENV_OFFSET=0x0
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="r8a774a1-beacon-rzg2m-kit"
|
|
CONFIG_RCAR_GEN3=y
|
|
CONFIG_TARGET_BEACON_RZG2M=y
|
|
# CONFIG_SPL is not set
|
|
CONFIG_LTO=y
|
|
CONFIG_REMAKE_ELF=y
|
|
CONFIG_SYS_LOAD_ADDR=0x58000000
|
|
CONFIG_FIT=y
|
|
CONFIG_SUPPORT_RAW_INITRD=y
|
|
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
|
|
CONFIG_DEFAULT_FDT_FILE="r8a774a1-beacon-rzg2m-kit.dtb"
|
|
# CONFIG_BOARD_EARLY_INIT_F is not set
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_PART=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_OF_LIST="r8a774a1-beacon-rzg2m-kit r8a774b1-beacon-rzg2n-kit r8a774e1-beacon-rzg2h-kit"
|
|
CONFIG_MULTI_DTB_FIT_LZO=y
|
|
CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_SYS_MMC_ENV_PART=2
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_CLK=y
|
|
CONFIG_CLK_RENESAS=y
|
|
CONFIG_RCAR_GPIO=y
|
|
CONFIG_DM_PCA953X=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_RCAR_I2C=y
|
|
CONFIG_SYS_I2C_RCAR_IIC=y
|
|
CONFIG_MMC_IO_VOLTAGE=y
|
|
CONFIG_MMC_UHS_SUPPORT=y
|
|
CONFIG_MMC_HS200_SUPPORT=y
|
|
CONFIG_RENESAS_SDHI=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
CONFIG_BITBANGMII=y
|
|
CONFIG_PHY_ATHEROS=y
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_RENESAS_RAVB=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
|
CONFIG_SCIF_CONSOLE=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_RENESAS_RPC_SPI=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_PSCI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|