u-boot/drivers/power/power_spi.c
Tom Rini 5b471dee99 power_spi.c: Rewrite pmic_reg function
The pmic_spi_free function isn't ever used, and as the frameworks stand
today, cannot be, so remove it.  Integrate the probe function into
pmic_reg as it's not really a "probe" today.  Finally, add an err label
for the common failure cases.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-11-07 16:27:05 -05:00

80 lines
1.4 KiB
C

/*
* Copyright (C) 2011 Samsung Electronics
* Lukasz Majewski <l.majewski@samsung.com>
*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de
*
* (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/types.h>
#include <power/pmic.h>
#include <spi.h>
static struct spi_slave *slave;
static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
{
u32 pmic_tx, pmic_rx;
u32 tmp;
if (!slave) {
slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
p->hw.spi.mode);
if (!slave)
return -1;
}
if (check_reg(p, reg))
return -1;
if (spi_claim_bus(slave))
return -1;
pmic_tx = p->hw.spi.prepare_tx(reg, val, write);
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
pmic_spi_flags))
goto err;
if (write) {
pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
pmic_spi_flags))
goto err;
}
spi_release_bus(slave);
*val = cpu_to_be32(pmic_rx);
return 0;
err:
spi_release_bus(slave);
return -1;
}
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
{
if (pmic_reg(p, reg, &val, 1))
return -1;
return 0;
}
int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
{
if (pmic_reg(p, reg, val, 0))
return -1;
return 0;
}