mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 21:54:37 +08:00
93e1459641
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
634 lines
13 KiB
C
634 lines
13 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <board/cogent/flash.h>
|
|
#include <linux/compiler.h>
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_FLASH)
|
|
# ifndef CONFIG_ENV_ADDR
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
# endif
|
|
# ifndef CONFIG_ENV_SIZE
|
|
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
# endif
|
|
# ifndef CONFIG_ENV_SECT_SIZE
|
|
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
# endif
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static int write_word (flash_info_t *info, ulong dest, ulong data);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
|
|
#if defined(CONFIG_CMA302)
|
|
|
|
/*
|
|
* probe for the existence of flash at address "addr"
|
|
* 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id
|
|
*/
|
|
static int
|
|
c302f_probe_word(c302f_addr_t addr)
|
|
{
|
|
/* reset the flash */
|
|
*addr = C302F_BNK_CMD_RST;
|
|
|
|
/* check the manufacturer id */
|
|
*addr = C302F_BNK_CMD_RD_ID;
|
|
if (*C302F_BNK_ADDR_MAN(addr) != C302F_BNK_RD_ID_MAN)
|
|
return 1;
|
|
|
|
/* check the device id */
|
|
*addr = C302F_BNK_CMD_RD_ID;
|
|
if (*C302F_BNK_ADDR_DEV(addr) != C302F_BNK_RD_ID_DEV)
|
|
return 2;
|
|
|
|
#ifdef FLASH_DEBUG
|
|
{
|
|
int i;
|
|
|
|
printf("\nMaster Lock Config = 0x%08lx\n",
|
|
*C302F_BNK_ADDR_CFGM(addr));
|
|
for (i = 0; i < C302F_BNK_NBLOCKS; i++)
|
|
printf("Block %2d Lock Config = 0x%08lx\n",
|
|
i, *C302F_BNK_ADDR_CFG(i, addr));
|
|
}
|
|
#endif
|
|
|
|
/* reset the flash again */
|
|
*addr = C302F_BNK_CMD_RST;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* probe for Cogent CMA302 flash module at address "base" and store
|
|
* info for any found into flash_info entry "fip". Must find at least
|
|
* one bank.
|
|
*/
|
|
static void
|
|
c302f_probe(flash_info_t *fip, c302f_addr_t base)
|
|
{
|
|
c302f_addr_t addr, eaddr;
|
|
int nbanks;
|
|
|
|
fip->size = 0L;
|
|
fip->sector_count = 0;
|
|
|
|
addr = base;
|
|
eaddr = C302F_BNK_ADDR_BASE(addr, C302F_MAX_BANKS);
|
|
nbanks = 0;
|
|
|
|
while (addr < eaddr) {
|
|
c302f_addr_t addrw, eaddrw, addrb;
|
|
int i, osc, nsc;
|
|
|
|
addrw = addr;
|
|
eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw);
|
|
|
|
while (addrw < eaddrw)
|
|
if (c302f_probe_word(addrw++) != 0)
|
|
goto out;
|
|
|
|
/* bank exists - append info for this bank to *fip */
|
|
fip->flash_id = FLASH_MAN_INTEL|FLASH_28F008S5;
|
|
fip->size += C302F_BNK_SIZE;
|
|
osc = fip->sector_count;
|
|
fip->sector_count += C302F_BNK_NBLOCKS;
|
|
if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT)
|
|
panic("Too many sectors in flash at address 0x%08lx\n",
|
|
(unsigned long)base);
|
|
|
|
addrb = addr;
|
|
for (i = osc; i < nsc; i++) {
|
|
fip->start[i] = (ulong)addrb;
|
|
fip->protect[i] = 0;
|
|
addrb = C302F_BNK_ADDR_NEXT_BLK(addrb);
|
|
}
|
|
|
|
addr = C302F_BNK_ADDR_NEXT_BNK(addr);
|
|
nbanks++;
|
|
}
|
|
|
|
out:
|
|
if (nbanks == 0)
|
|
panic("ERROR: no flash found at address 0x%08lx\n",
|
|
(unsigned long)base);
|
|
}
|
|
|
|
static void
|
|
c302f_reset(flash_info_t *info, int sect)
|
|
{
|
|
c302f_addr_t addrw, eaddrw;
|
|
|
|
addrw = (c302f_addr_t)info->start[sect];
|
|
eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw);
|
|
|
|
while (addrw < eaddrw) {
|
|
#ifdef FLASH_DEBUG
|
|
printf(" writing reset cmd to addr 0x%08lx\n",
|
|
(unsigned long)addrw);
|
|
#endif
|
|
*addrw = C302F_BNK_CMD_RST;
|
|
addrw++;
|
|
}
|
|
}
|
|
|
|
static void
|
|
c302f_erase_init(flash_info_t *info, int sect)
|
|
{
|
|
c302f_addr_t addrw, saddrw, eaddrw;
|
|
int flag;
|
|
|
|
#ifdef FLASH_DEBUG
|
|
printf("0x%08lx C302F_BNK_CMD_PROG\n", C302F_BNK_CMD_PROG);
|
|
printf("0x%08lx C302F_BNK_CMD_ERASE1\n", C302F_BNK_CMD_ERASE1);
|
|
printf("0x%08lx C302F_BNK_CMD_ERASE2\n", C302F_BNK_CMD_ERASE2);
|
|
printf("0x%08lx C302F_BNK_CMD_CLR_STAT\n", C302F_BNK_CMD_CLR_STAT);
|
|
printf("0x%08lx C302F_BNK_CMD_RST\n", C302F_BNK_CMD_RST);
|
|
printf("0x%08lx C302F_BNK_STAT_RDY\n", C302F_BNK_STAT_RDY);
|
|
printf("0x%08lx C302F_BNK_STAT_ERR\n", C302F_BNK_STAT_ERR);
|
|
#endif
|
|
|
|
saddrw = (c302f_addr_t)info->start[sect];
|
|
eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw);
|
|
|
|
#ifdef FLASH_DEBUG
|
|
printf("erasing sector %d, start addr = 0x%08lx "
|
|
"(bank next word addr = 0x%08lx)\n", sect,
|
|
(unsigned long)saddrw, (unsigned long)eaddrw);
|
|
#endif
|
|
|
|
/* Disable intrs which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
for (addrw = saddrw; addrw < eaddrw; addrw++) {
|
|
#ifdef FLASH_DEBUG
|
|
printf(" writing erase cmd to addr 0x%08lx\n",
|
|
(unsigned long)addrw);
|
|
#endif
|
|
*addrw = C302F_BNK_CMD_ERASE1;
|
|
*addrw = C302F_BNK_CMD_ERASE2;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
}
|
|
|
|
static int
|
|
c302f_erase_poll(flash_info_t *info, int sect)
|
|
{
|
|
c302f_addr_t addrw, saddrw, eaddrw;
|
|
int sectdone, haderr;
|
|
|
|
saddrw = (c302f_addr_t)info->start[sect];
|
|
eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw);
|
|
|
|
sectdone = 1;
|
|
haderr = 0;
|
|
|
|
for (addrw = saddrw; addrw < eaddrw; addrw++) {
|
|
c302f_word_t stat = *addrw;
|
|
|
|
#ifdef FLASH_DEBUG
|
|
printf(" checking status at addr "
|
|
"0x%08lx [0x%08lx]\n",
|
|
(unsigned long)addrw, stat);
|
|
#endif
|
|
if ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY)
|
|
sectdone = 0;
|
|
else if ((stat & C302F_BNK_STAT_ERR) != 0) {
|
|
printf(" failed on sector %d "
|
|
"(stat = 0x%08lx) at "
|
|
"address 0x%08lx\n",
|
|
sect, stat,
|
|
(unsigned long)addrw);
|
|
*addrw = C302F_BNK_CMD_CLR_STAT;
|
|
haderr = 1;
|
|
}
|
|
}
|
|
|
|
if (haderr)
|
|
return (-1);
|
|
else
|
|
return (sectdone);
|
|
}
|
|
|
|
static int
|
|
c302f_write_word(c302f_addr_t addr, c302f_word_t value)
|
|
{
|
|
c302f_word_t stat;
|
|
ulong start;
|
|
int flag, retval;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
*addr = C302F_BNK_CMD_PROG;
|
|
|
|
*addr = value;
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
retval = 0;
|
|
|
|
/* data polling for D7 */
|
|
start = get_timer (0);
|
|
do {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
retval = 1;
|
|
goto done;
|
|
}
|
|
stat = *addr;
|
|
} while ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY);
|
|
|
|
if ((stat & C302F_BNK_STAT_ERR) != 0) {
|
|
printf("flash program failed (stat = 0x%08lx) "
|
|
"at address 0x%08lx\n", (ulong)stat, (ulong)addr);
|
|
*addr = C302F_BNK_CMD_CLR_STAT;
|
|
retval = 3;
|
|
}
|
|
|
|
done:
|
|
/* reset to read mode */
|
|
*addr = C302F_BNK_CMD_RST;
|
|
|
|
return (retval);
|
|
}
|
|
|
|
#endif /* CONFIG_CMA302 */
|
|
|
|
unsigned long
|
|
flash_init(void)
|
|
{
|
|
unsigned long total;
|
|
int i;
|
|
__maybe_unused flash_info_t *fip;
|
|
|
|
/* Init: no FLASHes known */
|
|
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
}
|
|
|
|
fip = &flash_info[0];
|
|
total = 0L;
|
|
|
|
#if defined(CONFIG_CMA302)
|
|
c302f_probe(fip, (c302f_addr_t)CONFIG_SYS_FLASH_BASE);
|
|
total += fip->size;
|
|
fip++;
|
|
#endif
|
|
|
|
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
|
|
/* not yet ...
|
|
cmbf_probe(fip, (cmbf_addr_t)CMA_MB_FLASH_BASE);
|
|
total += fip->size;
|
|
fip++;
|
|
*/
|
|
#endif
|
|
|
|
/*
|
|
* protect monitor and environment sectors
|
|
*/
|
|
|
|
#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
|
|
&flash_info[0]);
|
|
#endif
|
|
return total;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void
|
|
flash_print_info(flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_INTEL: printf ("INTEL "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F008S5: printf ("28F008S5\n");
|
|
break;
|
|
default: printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 4) == 0)
|
|
printf ("\n ");
|
|
printf (" %2d - %08lX%s", i,
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " "
|
|
);
|
|
}
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
|
|
int
|
|
flash_erase(flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
int prot, sect, haderr;
|
|
ulong start, now, last;
|
|
void (*erase_init)(flash_info_t *, int);
|
|
int (*erase_poll)(flash_info_t *, int);
|
|
void (*reset)(flash_info_t *, int);
|
|
int rcode = 0;
|
|
|
|
#ifdef FLASH_DEBUG
|
|
printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
|
|
" Bank # %d: ", s_last - s_first + 1, s_first, s_last,
|
|
(info - flash_info) + 1);
|
|
flash_print_info(info);
|
|
#endif
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
switch (info->flash_id) {
|
|
|
|
#if defined(CONFIG_CMA302)
|
|
case FLASH_MAN_INTEL|FLASH_28F008S5:
|
|
erase_init = c302f_erase_init;
|
|
erase_poll = c302f_erase_poll;
|
|
reset = c302f_reset;
|
|
break;
|
|
#endif
|
|
|
|
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
|
|
case FLASH_MAN_INTEL|FLASH_28F800_B:
|
|
case FLASH_MAN_AMD|FLASH_AM29F800B:
|
|
/* not yet ...
|
|
erase_init = cmbf_erase_init;
|
|
erase_poll = cmbf_erase_poll;
|
|
reset = cmbf_reset;
|
|
break;
|
|
*/
|
|
#endif
|
|
|
|
default:
|
|
printf ("Flash type %08lx not supported - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf("- Warning: %d protected sector%s will not be erased!\n",
|
|
prot, (prot > 1 ? "s" : ""));
|
|
}
|
|
|
|
start = get_timer (0);
|
|
last = 0;
|
|
haderr = 0;
|
|
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
ulong estart;
|
|
int sectdone;
|
|
|
|
(*erase_init)(info, sect);
|
|
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
estart = get_timer(start);
|
|
|
|
do {
|
|
now = get_timer(start);
|
|
|
|
if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout (sect %d)\n", sect);
|
|
haderr = 1;
|
|
break;
|
|
}
|
|
|
|
#ifndef FLASH_DEBUG
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
#endif
|
|
|
|
sectdone = (*erase_poll)(info, sect);
|
|
|
|
if (sectdone < 0) {
|
|
haderr = 1;
|
|
break;
|
|
}
|
|
|
|
} while (!sectdone);
|
|
|
|
if (haderr)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (haderr > 0) {
|
|
printf (" failed\n");
|
|
rcode = 1;
|
|
}
|
|
else
|
|
printf (" done\n");
|
|
|
|
/* reset to read mode */
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
(*reset)(info, sect);
|
|
}
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
* 3 - write error
|
|
*/
|
|
|
|
int
|
|
write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp, data;
|
|
int i, l, rc;
|
|
ulong start, now, last;
|
|
|
|
wp = (addr & ~3); /* get lower word aligned address */
|
|
|
|
/*
|
|
* handle unaligned start bytes
|
|
*/
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i=0, cp=wp; i<l; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
for (; i<4 && cnt>0; ++i) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt==0 && i<4; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
if ((rc = write_word(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 4;
|
|
}
|
|
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
start = get_timer (0);
|
|
last = 0;
|
|
while (cnt >= 4) {
|
|
data = 0;
|
|
for (i=0; i<4; ++i) {
|
|
data = (data << 8) | *src++;
|
|
}
|
|
if ((rc = write_word(info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 4;
|
|
cnt -= 4;
|
|
|
|
/* show that we're waiting */
|
|
now = get_timer(start);
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
|
|
data = (data << 8) | *src++;
|
|
--cnt;
|
|
}
|
|
for (; i<4; ++i, ++cp) {
|
|
data = (data << 8) | (*(uchar *)cp);
|
|
}
|
|
|
|
return (write_word(info, wp, data));
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
* 3 - write error
|
|
*/
|
|
static int
|
|
write_word(flash_info_t *info, ulong dest, ulong data)
|
|
{
|
|
int retval;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*(ulong *)dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
switch (info->flash_id) {
|
|
|
|
#if defined(CONFIG_CMA302)
|
|
case FLASH_MAN_INTEL|FLASH_28F008S5:
|
|
retval = c302f_write_word((c302f_addr_t)dest, (c302f_word_t)data);
|
|
break;
|
|
#endif
|
|
|
|
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
|
|
case FLASH_MAN_INTEL|FLASH_28F800_B:
|
|
case FLASH_MAN_AMD|FLASH_AM29F800B:
|
|
/* not yet ...
|
|
retval = cmbf_write_word((cmbf_addr_t)dest, (cmbf_word_t)data);
|
|
*/
|
|
retval = 3;
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
printf ("Flash type %08lx not supported - aborted\n",
|
|
info->flash_id);
|
|
retval = 3;
|
|
break;
|
|
}
|
|
|
|
return (retval);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|