mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-15 15:53:26 +08:00
cb04db155f
A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com>
116 lines
3.3 KiB
C
116 lines
3.3 KiB
C
/*
|
|
* U-Boot - Configuration file for IBF-DSP561 board
|
|
*/
|
|
|
|
#ifndef __CONFIG_IBF_DSP561__H__
|
|
#define __CONFIG_IBF_DSP561__H__
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf561-0.5
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 25000000
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 24
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 5
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 9
|
|
#define CONFIG_MEM_SIZE 64
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x377
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x91998d
|
|
#define CONFIG_EBIU_SDBCTL_VAL 0x15
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0x3F
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_DRIVER_AX88180 1
|
|
#define AX88180_BASE 0x2c000000
|
|
#define CONFIG_HOSTNAME ibf-dsp561
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CONFIG_SYS_FLASH_CFI_AMD_RESET
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 135 /* max number of sectors on one chip */
|
|
/* The BF561-EZKIT uses a top boot flash */
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x12000 /* Total Size of Environment Sector */
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
|
#define ENV_IS_EMBEDDED
|
|
#else
|
|
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
|
|
#endif
|
|
#ifdef ENV_IS_EMBEDDED
|
|
/* WARNING - the following is hand-optimized to fit within
|
|
* the sector before the environment sector. If it throws
|
|
* an error during compilation remove an object here to get
|
|
* it linked after the configuration sector.
|
|
*/
|
|
# define LDS_BOARD_TEXT \
|
|
arch/blackfin/lib/built-in.o (.text*); \
|
|
arch/blackfin/cpu/built-in.o (.text*); \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
common/env_embedded.o (.text*);
|
|
#endif
|
|
|
|
/*
|
|
* I2C Settings
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
|
|
#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#endif
|