mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-26 21:23:24 +08:00
702e6014f1
Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
878 lines
20 KiB
Plaintext
878 lines
20 KiB
Plaintext
# Porting U-Boot onto RPXlite board
|
|
# Written by Yoo. Jonghoon
|
|
# E-Mail : yooth@ipone.co.kr
|
|
# IP ONE Inc.
|
|
|
|
# Since 2001. 1. 29
|
|
|
|
# Shell : bash
|
|
# Cross-compile tools : Montavista Hardhat
|
|
# Debugging tools : Windriver VisionProbe (PowerPC BDM)
|
|
# ppcboot ver. : ppcboot-0.8.1
|
|
|
|
###############################################################
|
|
# 1. Hardware setting
|
|
###############################################################
|
|
|
|
1.1. Board, BDM settings
|
|
Install board, BDM, connect each other
|
|
|
|
1.2. Save Register value
|
|
Boot with board-on monitor program and save the
|
|
register values with BDM.
|
|
|
|
1.3. Configure flash programmer
|
|
Check flash memory area in the memory map.
|
|
0xFFC00000 - 0xFFFFFFFF
|
|
|
|
Boot monitor program is at
|
|
0xFFF00000
|
|
|
|
You can program on-board flash memory with VisionClick
|
|
flash programmer. Set the target flash device as:
|
|
|
|
29DL800B
|
|
|
|
(?) The flash memory device in the board *is* 29LV800B,
|
|
but I cannot program it with '29LV800B' option.
|
|
(in VisionClick flash programming tools)
|
|
I don't know why...
|
|
|
|
1.4. Save boot monitor program *IMPORTANT*
|
|
Upload boot monitor program from board to file.
|
|
boot monitor program starts at 0xFFF00000
|
|
|
|
1.5. Test flash memory programming
|
|
Try to erase boot program in the flash memory,
|
|
and re-write them.
|
|
*WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE
|
|
BEFORE ERASING FLASH
|
|
|
|
###############################################################
|
|
# 2. U-Boot setting
|
|
###############################################################
|
|
|
|
2.1. Download U-Boot tarball at
|
|
ftp://ftp.denx.de
|
|
(The latest version is ppcboot-0.8.1.tar.bz2)
|
|
|
|
To extract the archive use the following syntax :
|
|
> bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf -
|
|
|
|
2.2. Add the following lines in '.profile'
|
|
export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin
|
|
|
|
2.3. Make board specific config, for example:
|
|
> cd ppcboot-0.8.1
|
|
> make TQM860L_config
|
|
|
|
Now we can build ppcboot bin files.
|
|
After make all, you must see these files in your
|
|
ppcboot root directory.
|
|
|
|
ppcboot
|
|
ppcboot.bin
|
|
ppcboot.srec
|
|
ppcboot.map
|
|
|
|
2.4. Make your own board directory into the
|
|
ppcboot-0.8.1/board
|
|
and make your board-specific files here.
|
|
|
|
For exmanple, tqm8xx files are composed of
|
|
.depend : Nothing
|
|
Makefile : To make config file
|
|
config.mk : Sets base address
|
|
flash.c : Flash memory control files
|
|
ppcboot.lds : linker(ld) script? (I don't know this yet)
|
|
tqm8xx.c : DRAM control and board check routines
|
|
|
|
And, add your board config lines in the
|
|
ppcboot-0.8.1/Makefile
|
|
|
|
Finally, add config_(your board).h file in the
|
|
ppcboot-0.8.1/include/
|
|
|
|
I've made board/rpxlite directory, and just copied
|
|
tqm8xx settings for now.
|
|
|
|
Rebuild ppcboot for rpxlite board:
|
|
> make rpxlite_config
|
|
> make
|
|
|
|
###############################################################
|
|
# 3. U-Boot porting
|
|
###############################################################
|
|
|
|
3.1. My RPXlite files are based on tqm8xx board files.
|
|
> cd board
|
|
> cp -r tqm8xx RPXLITE
|
|
> cd RPXLITE
|
|
> mv tqm8xx.c RPXLITE.c
|
|
> cd ../../include
|
|
> cp config_tqm8xx.h config_RPXLITE.h
|
|
|
|
3.2. Modified files are:
|
|
board/RPXLITE/RPXLITE.c /* DRAM-related routines */
|
|
board/RPXLITE/flash.c /* flash-related routines */
|
|
board/RPXLITE/config.mk /* set text base address */
|
|
arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
|
|
include/config_RPXLITE.h /* board specific registers */
|
|
|
|
See 'reg_config.txt' for register values in detail.
|
|
|
|
###############################################################
|
|
# 4. Running Linux
|
|
###############################################################
|
|
|
|
|
|
###############################################################
|
|
# Misc Information
|
|
###############################################################
|
|
|
|
mem_config.txt:
|
|
===============
|
|
|
|
Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device
|
|
manufacturer id : 01 (AMD)
|
|
device id : 5B (AM29LV800B)
|
|
size : 4Mbyte
|
|
sector # : 19
|
|
|
|
Sector information :
|
|
|
|
number start addr. size
|
|
00 FFC0_0000 64
|
|
01 FFC1_0000 32
|
|
02 FFC1_8000 32
|
|
03 FFC2_0000 128
|
|
04 FFC4_0000 256
|
|
05 FFC8_0000 256
|
|
06 FFCC_0000 256
|
|
07 FFD0_0000 256
|
|
08 FFD4_0000 256
|
|
09 FFD8_0000 256
|
|
10 FFDC_0000 256
|
|
11 FFE0_0000 256
|
|
12 FFE4_0000 256
|
|
13 FFE8_0000 256
|
|
14 FFEC_0000 256
|
|
15 FFF0_0000 256
|
|
16 FFF4_0000 256
|
|
17 FFF8_0000 256
|
|
18 FFFC_0000 256
|
|
|
|
|
|
reg_config.txt:
|
|
===============
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* SIU (System Interface Unit) */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
|
|
|
|
/*### IMMR */
|
|
/*### Internal Memory Map Register */
|
|
/*### Chap. 11.4.1 */
|
|
|
|
ISB = 0xFA20 /* Set the Immap base = 0xFA20 0000 */
|
|
PARTNUM = 0x21
|
|
MASKNUM = 0x00
|
|
|
|
=> 0xFA20 2100
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SIUMCR */
|
|
/*### SIU Module Configuration Register */
|
|
/*### Chap. 11.4.2 */
|
|
/*### Offset : 0x0000 0000 */
|
|
|
|
EARB = 0
|
|
EARP = 0
|
|
DSHW = 0
|
|
DBGC = 0
|
|
DBPC = 0
|
|
FRC = 0
|
|
DLK = 0
|
|
OPAR = 0
|
|
PNCS = 0
|
|
DPC = 0
|
|
MPRE = 0
|
|
MLRC = 10 /* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */
|
|
AEME = 0
|
|
SEME = 0
|
|
BSC = 0
|
|
GB5E = 0
|
|
B2DD = 0
|
|
B3DD = 0
|
|
|
|
=> 0x0000 0800
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SYPCR */
|
|
/*### System Protection Control Register */
|
|
/*### Chap. 11.4.3 */
|
|
/*### Offset : 0x0000 0004 */
|
|
|
|
SWTC = 0xFFFF /* SW watchdog timer count = 0xFFFF */
|
|
BMT = 0x06 /* BUS monitoring timing */
|
|
BME = 1 /* BUS monitor enable */
|
|
SWF = 1
|
|
SWE = 0 /* SW watchdog disable */
|
|
SWRI = 0
|
|
SWP = 1
|
|
|
|
=> 0xFFFF 0689
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### TESR */
|
|
/*### Transfer Error Status Register */
|
|
/*### Chap. 11.4.4 */
|
|
/*### Offset : 0x0000 0020 */
|
|
|
|
IEXT = 0
|
|
ITMT = 0
|
|
IPB = 0000
|
|
DEXT = 0
|
|
DTMT = 0
|
|
DPB = 0000
|
|
|
|
=> 0x0000 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SIPEND */
|
|
/*### SIU Interrupt Pending Register */
|
|
/*### Chap. 11.5.4.1 */
|
|
/*### Offset : 0x0000 0010 */
|
|
|
|
IRQ0~IRQ7 = 0
|
|
LVL0~LVL7 = 0
|
|
|
|
=> 0x0000 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SIMASK */
|
|
/*### SIU Interrupt Mask Register */
|
|
/*### Chap. 11.5.4.2 */
|
|
/*### Offset : 0x0000 0014 */
|
|
|
|
IRM0~IRM7 = 0 /* Mask all interrupts */
|
|
LVL0~LVL7 = 0
|
|
|
|
=> 0x0000 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SIEL */
|
|
/*### SIU Interrupt Edge/Level Register */
|
|
/*### Chap. 11.5.4.3 */
|
|
/*### Offset : 0x0000 0018 */
|
|
|
|
ED0~ED7 = 0 /* Low level triggered */
|
|
WMn0~WMn7 = 0 /* Not allowed to exit from low-power mode */
|
|
|
|
=> 0x0000 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SIVEC */
|
|
/*### SIU Interrupt Vector Register */
|
|
/*### Chap. 11.5.4.4 */
|
|
/*### Offset : 0x0000 001C */
|
|
|
|
INTC = 3C /* The lowest interrupt is pending..(?) */
|
|
|
|
=> 0x3C00 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SWSR */
|
|
/*### Software Service Register */
|
|
/*### Chap. 11.7.1 */
|
|
/*### Offset : 0x0000 001E */
|
|
|
|
SEQ = 0
|
|
|
|
=> 0x0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SDCR */
|
|
/*### SDMA Configuration Register */
|
|
/*### Chap. 20.2.1 */
|
|
/*### Offset : 0x0000 0032 */
|
|
|
|
FRZ = 0
|
|
RAID = 01 /* Priority level 5 (BR5) (normal operation) */
|
|
|
|
=> 0x0000 0001
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* UPMA (User Programmable Machine A) */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
|
|
/*### Chap. 16.6.4.1 */
|
|
/*### Offset = 0x0000 017c */
|
|
|
|
T0 = CFFF CC24 /* Single Read */
|
|
T1 = 0FFF CC04
|
|
T2 = 0CAF CC04
|
|
T3 = 03AF CC08
|
|
T4 = 3FBF CC27 /* last */
|
|
T5 = FFFF CC25
|
|
T6 = FFFF CC25
|
|
T7 = FFFF CC25
|
|
T8 = CFFF CC24 /* Burst Read */
|
|
T9 = 0FFF CC04
|
|
T10 = 0CAF CC84
|
|
T11 = 03AF CC88
|
|
T12 = 3FBF CC27 /* last */
|
|
T13 = FFFF CC25
|
|
T14 = FFFF CC25
|
|
T15 = FFFF CC25
|
|
T16 = FFFF CC25
|
|
T17 = FFFF CC25
|
|
T18 = FFFF CC25
|
|
T19 = FFFF CC25
|
|
T20 = FFFF CC25
|
|
T21 = FFFF CC25
|
|
T22 = FFFF CC25
|
|
T23 = FFFF CC25
|
|
T24 = CFFF CC24 /* Single Write */
|
|
T25 = 0FFF CC04
|
|
T26 = 0CFF CC04
|
|
T27 = 03FF CC00
|
|
T28 = 3FFF CC27 /* last */
|
|
T29 = FFFF CC25
|
|
T30 = FFFF CC25
|
|
T31 = FFFF CC25
|
|
T32 = CFFF CC24 /* Burst Write */
|
|
T33 = 0FFF CC04
|
|
T34 = 0CFF CC80
|
|
T35 = 03FF CC8C
|
|
T36 = 0CFF CC00
|
|
T37 = 33FF CC27 /* last */
|
|
T38 = FFFF CC25
|
|
T39 = FFFF CC25
|
|
T40 = FFFF CC25
|
|
T41 = FFFF CC25
|
|
T42 = FFFF CC25
|
|
T43 = FFFF CC25
|
|
T44 = FFFF CC25
|
|
T45 = FFFF CC25
|
|
T46 = FFFF CC25
|
|
T47 = FFFF CC25
|
|
T48 = C0FF CC24 /* Refresh */
|
|
T49 = 03FF CC24
|
|
T50 = 0FFF CC24
|
|
T51 = 0FFF CC24
|
|
T52 = 3FFF CC27 /* last */
|
|
T53 = FFFF CC25
|
|
T54 = FFFF CC25
|
|
T55 = FFFF CC25
|
|
T56 = FFFF CC25
|
|
T57 = FFFF CC25
|
|
T58 = FFFF CC25
|
|
T59 = FFFF CC25
|
|
T60 = FFFF CC25 /* Exception */
|
|
T61 = FFFF CC25
|
|
T62 = FFFF CC25
|
|
T63 = FFFF CC25
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* UPMB */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
---------------------------------------------------------------------
|
|
|
|
/*### Chap. 16.6.4.1 */
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* MEMC */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
---------------------------------------------------------------------
|
|
|
|
/*### BR0 & OR0 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */
|
|
/*### Flash memory */
|
|
|
|
BA = 1111 1110 0000 0000 0 /* Base addr = 0xFE00 0000 */
|
|
AT = 000
|
|
PS = 00
|
|
PARE = 0
|
|
WP = 0
|
|
MS = 0 /* GPCM */
|
|
V = 1 /* Valid */
|
|
|
|
=> 0xFE00 0001
|
|
|
|
AM = 1111 1110 0000 0000 0 /* 32MBytes */
|
|
ATM = 000
|
|
CSNT/SAM = 0
|
|
ACS/G5LA,G5LS = 00
|
|
BIH = 1 /* Burst inhibited */
|
|
SCY = 0100 /* cycle length = 4 */
|
|
SETA = 0
|
|
TRLX = 0
|
|
EHTR = 0
|
|
|
|
=> 0xFE00 0140
|
|
|
|
/*### BR1 & OR1 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */
|
|
/*### SDRAM */
|
|
|
|
BA = 0000 0000 0000 0000 0 /* Base addr = 0x0000 0000 */
|
|
AT = 000
|
|
PS = 00
|
|
PARE = 0
|
|
WP = 0
|
|
MS = 1 /* UPMA */
|
|
V = 1 /* Valid */
|
|
|
|
=> 0x0000 0081
|
|
|
|
AM = 1111 1110 0000 0000 /* 32MBytes */
|
|
ATM = 000
|
|
CSNT/SAM = 1
|
|
ACS/G5LA,G5LS = 11
|
|
BIH = 0
|
|
SCY = 0000 /* cycle length = 0 */
|
|
SETA = 0
|
|
TRLX = 0
|
|
EHTR = 0
|
|
|
|
=> 0xFE00 0E00
|
|
|
|
/*### BR2 & OR2 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */
|
|
|
|
BR2 & OR2 = 0x0000 0000 /* Not used */
|
|
|
|
/*### BR3 & OR3 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */
|
|
/*### BCSR */
|
|
|
|
BA = 1111 1010 0100 0000 0 /* Base addr = 0xFA40 0000 */
|
|
AT = 000
|
|
PS = 00
|
|
PARE = 0
|
|
WP = 0
|
|
MS = 0 /* GPCM */
|
|
V = 1 /* Valid */
|
|
|
|
=> 0xFA40 0001
|
|
|
|
AM = 1111 1111 0111 1111 1 /* (?) */
|
|
ATM = 000
|
|
CSNT/SAM = 1
|
|
ACS/G5LA,G5LS = 00
|
|
BIH = 1 /* Burst inhibited */
|
|
SCY = 0001 /* cycle length = 1 */
|
|
SETA = 0
|
|
TRLX = 0
|
|
|
|
=> 0xFF7F 8910
|
|
|
|
/*### BR4 & OR4 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */
|
|
/*### NVRAM & SRAM */
|
|
|
|
BA = 1111 1010 0000 0000 0 /* Base addr = 0xFA00 0000 */
|
|
AT = 000
|
|
PS = 01
|
|
PARE = 0
|
|
WP = 0
|
|
MS = 0 /* GPCM */
|
|
V = 1 /* Valid */
|
|
|
|
=> 0xFA00 0401
|
|
|
|
AM = 1111 1111 1111 1000 0 /* 8MByte */
|
|
ATM = 000
|
|
CSNT/SAM = 1
|
|
ACS/G5LA,G5LS = 00
|
|
BIH = 1 /* Burst inhibited */
|
|
SCY = 0111 /* cycle length = 7 */
|
|
SETA = 0
|
|
TRLX = 0
|
|
|
|
=> 0xFFF8 0970
|
|
|
|
/*### BR5 & OR5 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */
|
|
|
|
BR5 & OR5 = 0x0000 0000 /* Not used */
|
|
|
|
/*### BR6 & OR6 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */
|
|
|
|
BR6 & OR6 = 0x0000 0000 /* Not used */
|
|
|
|
/*### BR7 & OR7 */
|
|
/*### Base Registers & Option Registers */
|
|
/*### Chap. 16.4.1 & 16.4.2 */
|
|
/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */
|
|
|
|
BR7 & OR7 = 0x0000 0000 /* Not used */
|
|
|
|
/*### MAR */
|
|
/*### Memory Address Register */
|
|
/*### Chap. 16.4.7 */
|
|
/*### Offset : 0x0000 0164 */
|
|
|
|
MA = External memory address
|
|
|
|
/*### MCR */
|
|
/*### Memory Command Register */
|
|
/*### Chap. 16.4.5 */
|
|
/*### Offset : 0x0000 0168 */
|
|
|
|
OP = xx /* Command op code */
|
|
UM = 1 /* Select UPMA */
|
|
MB = 001 /* Select CS1 */
|
|
MCLF = xxxx /* Loop times */
|
|
MAD = xx xxxx /* Memory array index */
|
|
|
|
/*### MAMR */
|
|
/*### Machine A Mode Register */
|
|
/*### Chap. 16.4.4 */
|
|
/*### Offset : 0x0000 0170 */
|
|
|
|
PTA = 0101 1000
|
|
PTAE = 1 /* Periodic timer A enabled */
|
|
AMA = 010
|
|
DSA = 00
|
|
G0CLA = 000
|
|
GPLA4DIS = 1
|
|
RLFA = 0100
|
|
WLFA = 0011
|
|
TLFA = 0000
|
|
|
|
=> 0x58A0 1430
|
|
|
|
/*### MBMR */
|
|
/*### Machine B Mode Register */
|
|
/*### Chap. 16.4.4 */
|
|
/*### Offset : 0x0000 0174 */
|
|
|
|
PTA = 0100 1110
|
|
PTAE = 0 /* Periodic timer B disabled */
|
|
AMA = 000
|
|
DSA = 00
|
|
G0CLA = 000
|
|
GPLA4DIS = 1
|
|
RLFA = 0000
|
|
WLFA = 0000
|
|
TLFA = 0000
|
|
|
|
=> 0x4E00 1000
|
|
|
|
/*### MSTAT */
|
|
/*### Memory Status Register */
|
|
/*### Chap. 16.4.3 */
|
|
/*### Offset : 0x0000 0178 */
|
|
|
|
PER0~PER7 = Parity error
|
|
WPER = Write protection error
|
|
|
|
=> 0x0000
|
|
|
|
/*### MPTPR */
|
|
/*### Memory Periodic Timer Prescaler Register */
|
|
/*### Chap. 16.4.8 */
|
|
/*### Offset : 0x0000 017A */
|
|
|
|
PTP = 0000 1000 /* Divide by 8 */
|
|
|
|
=> 0x0800
|
|
|
|
/*### MDR */
|
|
/*### Memory Data Register */
|
|
/*### Chap. 16.4.6 */
|
|
/*### Offset : 0x0000 017C */
|
|
|
|
MD = Memory data contains the RAM array word
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* TIMERS */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
---------------------------------------------------------------------
|
|
|
|
/*### TBREFx */
|
|
/*### Timebase Reference Registers */
|
|
/*### Chap. 11.9.2 */
|
|
/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */
|
|
/*### (Locked) */
|
|
|
|
TBREFF0 = 0xFFFF FFFF
|
|
TBREFF1 = 0xFFFF FFFF
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### TBSCR */
|
|
/*### Timebase Status and Control Registers */
|
|
/*### Chap. 11.9.3 */
|
|
/*### Offset : 0x0000 0200 */
|
|
/*### (Locked) */
|
|
|
|
TBIRQ = 00000000
|
|
REF0 = 0
|
|
REF1 = 0
|
|
REFE0 = 0 /* Reference interrupt disable */
|
|
REFE1 = 0
|
|
TBF = 1
|
|
TBE = 1 /* Timebase enable */
|
|
|
|
=> 0x0003
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### RTCSC */
|
|
/*### Real-Time Clock Status and Control Registers */
|
|
/*### Chap. 11.10.1 */
|
|
/*### Offset : 0x0000 0220 */
|
|
/*### (Locked) */
|
|
|
|
RTCIRQ = 00000000
|
|
SEC = 1
|
|
ALR = 0
|
|
38K = 0 /* PITRTCLK is driven by 32.768KHz */
|
|
SIE = 0
|
|
ALE = 0
|
|
RTF = 0
|
|
RTE = 1 /* Real-Time clock enabled */
|
|
|
|
=> 0x0081
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### RTC */
|
|
/*### Real-Time Clock Registers */
|
|
/*### Chap. 11.10.2 */
|
|
/*### Offset : 0x0000 0224 */
|
|
/*### (Locked) */
|
|
|
|
RTC = Real time clock measured in second
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### RTCAL */
|
|
/*### Real-Time Clock Alarm Registers */
|
|
/*### Chap. 11.10.3 */
|
|
/*### Offset : 0x0000 022C */
|
|
/*### (Locked) */
|
|
|
|
ALARM = 0xFFFF FFFF
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### RTSEC */
|
|
/*### Real-Time Clock Alarm Second Registers */
|
|
/*### Chap. 11.10.4 */
|
|
/*### Offset : 0x0000 0228 */
|
|
/*### (Locked) */
|
|
|
|
COUNTER = Counter bits(fraction of a second)
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### PISCR */
|
|
/*### Periodic Interrupt Status and Control Register */
|
|
/*### Chap. 11.11.1 */
|
|
/*### Offset : 0x0000 0240 */
|
|
/*### (Locked) */
|
|
|
|
PIRQ = 0
|
|
PS = 0 /* Write 1 to clear */
|
|
PIE = 0
|
|
PITF = 1
|
|
PTE = 0 /* PIT disabled */
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### PITC */
|
|
/*### PIT Count Register */
|
|
/*### Chap. 11.11.2 */
|
|
/*### Offset : 0x0000 0244 */
|
|
/*### (Locked) */
|
|
|
|
PITC = PIT count
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### PITR */
|
|
/*### PIT Register */
|
|
/*### Chap. 11.11.3 */
|
|
/*### Offset : 0x0000 0248 */
|
|
/*### (Locked) */
|
|
|
|
PIT = PIT count /* Read only */
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* CLOCKS */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
---------------------------------------------------------------------
|
|
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SCCR */
|
|
/*### System Clock and Reset Control Register */
|
|
/*### Chap. 15.6.1 */
|
|
/*### Offset : 0x0000 0280 */
|
|
/*### (Locked) */
|
|
|
|
COM = 11 /* Clock output disabled */
|
|
TBS = 1 /* Timebase frequency source is GCLK2 divided by 16 */
|
|
RTDIV = 0 /* The clock is divided by 4 */
|
|
RTSEL = 0 /* OSCM(Crystal oscillator) is selected */
|
|
CRQEN = 0
|
|
PRQEN = 0
|
|
EBDF = 00 /* CLKOUT is GCLK2 divided by 1 */
|
|
DFSYNC = 00 /* Divided by 1 (normal operation) */
|
|
DFBRG = 00 /* Divided by 1 (normal operation) */
|
|
DFNL = 000
|
|
DFNH = 000
|
|
|
|
=> 0x6200 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### PLPRCR */
|
|
/*### PLL, Low-Power, and Reset Control Register */
|
|
/*### Chap. 15.6.2 */
|
|
/*### Offset : 0x0000 0284 */
|
|
/*### (Locked) */
|
|
|
|
MF = 0x005 /* 48MHz (?) ( = 8MHz * (MF+1) ) */
|
|
SPLSS = 0
|
|
TEXPS = 0
|
|
TMIST = 0
|
|
CSRC = 0 /* The general system clock is generated by the DFNH field */
|
|
LPM = 00 /* Normal high/normal low mode */
|
|
CSR = 0
|
|
LOLRE = 0
|
|
FIOPD = 0
|
|
|
|
=> 0x0050 0000
|
|
|
|
---------------------------------------------------------------------
|
|
|
|
/*### RSR */
|
|
/*### Reset Status Register */
|
|
/*### Chap. 12.2 */
|
|
/*### Offset : 0x0000 0288 */
|
|
/*### (Locked) */
|
|
|
|
EHRS = External hard reset
|
|
ESRS = External soft reset
|
|
LLRS = Loss-of-lock reset
|
|
SWRS = Software watchdog reset
|
|
CSRS = Check stop reset
|
|
DBHRS = Debug port hard reset
|
|
DBSRS = Debug port soft reset
|
|
JTRS = JTAG reset
|
|
|
|
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
/* DMA */
|
|
/* */
|
|
/*------------------------------------------------------------------- */
|
|
/*------------------------------------------------------------------- */
|
|
---------------------------------------------------------------------
|
|
|
|
/*### SDSR */
|
|
/*### SDMA Status Register */
|
|
/*### Chap. 20.2.2 */
|
|
/*### Offset : 0x0000 0908 */
|
|
|
|
SBER = 0 /* SDMA channel bus error */
|
|
DSP2 = 0 /* DSP chain2 (Tx) interrupt */
|
|
DSP1 = 0 /* DSP chain1 (Rx) interrupt */
|
|
|
|
=> 0x00
|
|
|
|
/*### SDMR */
|
|
/*### SDMA Mask Register */
|
|
/*### Chap. 20.2.3 */
|
|
/*### Offset : 0x0000 090C */
|
|
|
|
SBER = 0
|
|
DSP2 = 0
|
|
DSP1 = 0 /* All interrupts are masked */
|
|
|
|
=> 0x00
|
|
|
|
/*### SDAR */
|
|
/*### SDMA Address Register */
|
|
/*### Chap. 20.2.4 */
|
|
/*### Offset : 0x0000 0904 */
|
|
|
|
AR = 0xxxxx xxxx /* current system address */
|
|
|
|
=> 0xFA20 23AC
|
|
|
|
/*### IDSRx */
|
|
/*### IDMA Status Register */
|
|
/*### Chap. 20.3.3.2 */
|
|
/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */
|
|
|
|
AD = 0
|
|
DONE = 0
|
|
OB = 0
|
|
|
|
=> 0x00
|
|
|
|
/*### IDMRx */
|
|
/*### IDMA Mask Register */
|
|
/*### Chap. 20.3.3.3 */
|
|
/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */
|
|
|
|
AD = 0
|
|
DONE = 0
|
|
OB = 0
|