mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 05:04:23 +08:00
24b852a7a2
The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
366 lines
7.2 KiB
C
366 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <console.h>
|
|
|
|
#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
|
|
#define FLASH_BANK_SIZE 0x200000
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case (AMD_MANUFACT & FLASH_VENDMASK):
|
|
printf ("AMD: ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case (AMD_ID_PL160CB & FLASH_TYPEMASK):
|
|
printf ("AM29PL160CB (16Mbit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
goto Done;
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf (" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
|
|
Done:
|
|
return;
|
|
}
|
|
|
|
|
|
unsigned long flash_init (void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
|
|
flash_info[i].flash_id =
|
|
(AMD_MANUFACT & FLASH_VENDMASK) |
|
|
(AMD_ID_PL160CB & FLASH_TYPEMASK);
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
|
|
if (i == 0)
|
|
flashbase = PHYS_FLASH_1;
|
|
else
|
|
panic ("configured to many flash banks!\n");
|
|
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
if (j == 0) {
|
|
/* 1st is 16 KiB */
|
|
flash_info[i].start[j] = flashbase;
|
|
}
|
|
if ((j >= 1) && (j <= 2)) {
|
|
/* 2nd and 3rd are 8 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x4000 + 0x2000 * (j - 1);
|
|
}
|
|
if (j == 3) {
|
|
/* 4th is 224 KiB */
|
|
flash_info[i].start[j] = flashbase + 0x8000;
|
|
}
|
|
if ((j >= 4) && (j <= 10)) {
|
|
/* rest is 256 KiB */
|
|
flash_info[i].start[j] =
|
|
flashbase + 0x40000 + 0x40000 * (j -
|
|
4);
|
|
}
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_FLASH_BASE,
|
|
CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
|
|
#define CMD_READ_ARRAY 0x00F0
|
|
#define CMD_UNLOCK1 0x00AA
|
|
#define CMD_UNLOCK2 0x0055
|
|
#define CMD_ERASE_SETUP 0x0080
|
|
#define CMD_ERASE_CONFIRM 0x0030
|
|
#define CMD_PROGRAM 0x00A0
|
|
#define CMD_UNLOCK_BYPASS 0x0020
|
|
|
|
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
|
|
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
|
|
|
|
#define BIT_ERASE_DONE 0x0080
|
|
#define BIT_RDY_MASK 0x0080
|
|
#define BIT_PROGRAM_ERROR 0x0020
|
|
#define BIT_TIMEOUT 0x80000000 /* our flag */
|
|
|
|
#define READY 1
|
|
#define ERR 2
|
|
#define TMO 4
|
|
|
|
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
ulong result;
|
|
int iflag, cflag, prot, sect;
|
|
int rc = ERR_OK;
|
|
int chip1;
|
|
ulong start;
|
|
|
|
/* first look for protection bits */
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
return ERR_UNKNOWN_FLASH_TYPE;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
return ERR_INVAL;
|
|
}
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) !=
|
|
(AMD_MANUFACT & FLASH_VENDMASK)) {
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot)
|
|
return ERR_PROTECTED;
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
printf ("\n");
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
|
|
printf ("Erasing sector %2d ... ", sect);
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
volatile u16 *addr =
|
|
(volatile u16 *) (info->start[sect]);
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
*addr = CMD_ERASE_CONFIRM;
|
|
|
|
/* wait until flash is ready */
|
|
chip1 = 0;
|
|
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
chip1 = TMO;
|
|
break;
|
|
}
|
|
|
|
if (!chip1
|
|
&& (result & 0xFFFF) & BIT_ERASE_DONE)
|
|
chip1 = READY;
|
|
|
|
} while (!chip1);
|
|
|
|
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
|
|
|
|
if (chip1 == ERR) {
|
|
rc = ERR_PROG_ERROR;
|
|
goto outahere;
|
|
}
|
|
if (chip1 == TMO) {
|
|
rc = ERR_TIMOUT;
|
|
goto outahere;
|
|
}
|
|
|
|
printf ("ok.\n");
|
|
} else { /* it was protected */
|
|
|
|
printf ("protected!\n");
|
|
}
|
|
}
|
|
|
|
if (ctrlc ())
|
|
printf ("User Interrupt!\n");
|
|
|
|
outahere:
|
|
/* allow flash to settle - wait 10 ms */
|
|
udelay (10000);
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int write_word (flash_info_t * info, ulong dest, ulong data)
|
|
{
|
|
volatile u16 *addr = (volatile u16 *) dest;
|
|
ulong result;
|
|
int rc = ERR_OK;
|
|
int cflag, iflag;
|
|
int chip1;
|
|
ulong start;
|
|
|
|
/*
|
|
* Check if Flash is (sufficiently) erased
|
|
*/
|
|
result = *addr;
|
|
if ((result & data) != data)
|
|
return ERR_NOT_ERASED;
|
|
|
|
|
|
/*
|
|
* Disable interrupts which might cause a timeout
|
|
* here. Remember that our exception vectors are
|
|
* at address 0 in the flash, and we don't want a
|
|
* (ticker) exception to happen while the flash
|
|
* chip is in programming mode.
|
|
*/
|
|
|
|
cflag = icache_status ();
|
|
icache_disable ();
|
|
iflag = disable_interrupts ();
|
|
|
|
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
|
|
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
|
|
MEM_FLASH_ADDR1 = CMD_PROGRAM;
|
|
*addr = data;
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
/* wait until flash is ready */
|
|
chip1 = 0;
|
|
do {
|
|
result = *addr;
|
|
|
|
/* check timeout */
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
chip1 = ERR | TMO;
|
|
break;
|
|
}
|
|
if (!chip1 && ((result & 0x80) == (data & 0x80)))
|
|
chip1 = READY;
|
|
|
|
} while (!chip1);
|
|
|
|
*addr = CMD_READ_ARRAY;
|
|
|
|
if (chip1 == ERR || *addr != data)
|
|
rc = ERR_PROG_ERROR;
|
|
|
|
if (iflag)
|
|
enable_interrupts ();
|
|
|
|
if (cflag)
|
|
icache_enable ();
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp, data;
|
|
int rc;
|
|
|
|
if (addr & 1) {
|
|
printf ("unaligned destination not supported\n");
|
|
return ERR_ALIGN;
|
|
}
|
|
|
|
#if 0
|
|
if (cnt & 1) {
|
|
printf ("odd transfer sizes not supported\n");
|
|
return ERR_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
wp = addr;
|
|
|
|
if (addr & 1) {
|
|
data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
|
|
src);
|
|
if ((rc = write_word (info, wp - 1, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 1;
|
|
wp += 1;
|
|
cnt -= 1;
|
|
}
|
|
|
|
while (cnt >= 2) {
|
|
data = *((volatile u16 *) src);
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 2;
|
|
wp += 2;
|
|
cnt -= 2;
|
|
}
|
|
|
|
if (cnt == 1) {
|
|
data = (*((volatile u8 *) src) << 8) |
|
|
*((volatile u8 *) (wp + 1));
|
|
if ((rc = write_word (info, wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += 1;
|
|
wp += 1;
|
|
cnt -= 1;
|
|
}
|
|
|
|
return ERR_OK;
|
|
}
|