u-boot

mirror of https://github.com/u-boot/u-boot.git synced 2024-12-01 00:23:29 +08:00

History

Tom Rini b4c4fec300 dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR - Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - While in here, enable CONFIG_SPL_STACK_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>		2015-08-12 20:48:07 -04:00
..
evm.c	ARM: DRA7: CPSW: Remove IO delay hack	2015-06-12 13:02:06 -04:00
Kconfig	dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR	2015-08-12 20:48:07 -04:00
MAINTAINERS	Add board MAINTAINERS files	2014-07-30 08:48:06 -04:00
Makefile	board: ti: convert makefiles to Kbuild style	2013-10-31 13:26:44 -04:00
mux_data.h	ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernel	2015-07-08 18:26:42 -04:00
README	mmc: Add 'mmc rst-function' sub-command	2014-04-02 13:02:58 +03:00

README

Summary
=======

This document covers various features of the 'dra7xx_evm' build and some
related uses.

eMMC boot partition use
=======================

It is possible, depending on SYSBOOT configuration to boot from the eMMC
boot partitions using (name depending on documentation referenced)
Alternative Boot operation mode or Boot Sequence Option 1/2.  In this
example we load MLO and u-boot.img from the build into DDR and then use
'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
set boot0 as the boot device.
U-Boot # setenv autoload no
U-Boot # usb start
U-Boot # dhcp
U-Boot # mmc dev 1 1
U-Boot # tftp ${loadaddr} dra7xx/MLO
U-Boot # mmc write ${loadaddr} 0 100
U-Boot # tftp ${loadaddr} dra7xx/u-boot.img
U-Boot # mmc write ${loadaddr} 300 400
U-Boot # mmc bootbus 1 2 0 2
U-Boot # mmc partconf 1 1 1 0
U-Boot # mmc rst-function 1 1