mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-30 08:03:32 +08:00
3fcfe80377
Some (not all) of ARMv7 boards define CONFIG_ARMV7, which is useless. Besides, it is never referenced. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
284 lines
8.0 KiB
C
284 lines
8.0 KiB
C
/*
|
|
* MATRIX VISION GmbH mvBlueLYNX-X
|
|
*
|
|
* Derived from omap3_beagle.h:
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
*
|
|
* Configuration settings for the TI OMAP3530 Beagle board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX
|
|
#define CONFIG_OMAP_GPIO
|
|
#define CONFIG_OMAP_COMMON
|
|
|
|
#define CONFIG_SDRC /* The chip has SDRC controller */
|
|
|
|
#include <asm/arch/cpu.h> /* get chip and board defs */
|
|
#include <asm/arch/omap3.h>
|
|
|
|
/*
|
|
* Display CPU and Board information
|
|
*/
|
|
#define CONFIG_DISPLAY_CPUINFO 1
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 26000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK >> 1)
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_OF_LIBFDT 1
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
#define CONFIG_REVISION_TAG 1
|
|
#define CONFIG_SERIAL_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */
|
|
/* Sector */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
|
#define CONFIG_SERIAL1 1 /* UART1 */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
|
115200}
|
|
#define CONFIG_GENERIC_MMC 1
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_OMAP_HSMMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/* silent console by default */
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1
|
|
#define CONFIG_SILENT_CONSOLE 1
|
|
|
|
/* USB */
|
|
#define CONFIG_MUSB_UDC 1
|
|
#define CONFIG_USB_OMAP3 1
|
|
#define CONFIG_TWL4030_USB 1
|
|
|
|
/* USB device configuration */
|
|
#define CONFIG_USB_DEVICE 1
|
|
#define CONFIG_USB_TTY 1
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
|
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
|
|
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
|
|
#define CONFIG_USBD_VENDORID 0x164c
|
|
#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201
|
|
#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201
|
|
#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH"
|
|
#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X"
|
|
|
|
/* no FLASH available */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/* commands to include */
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
|
#define CONFIG_CMD_FAT /* FAT support */
|
|
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
|
#define CONFIG_CMD_MMC /* MMC support */
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_IMI /* iminfo */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
|
#define CONFIG_CMD_NFS /* NFS support */
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_FPGA
|
|
#define CONFIG_CMD_FPGA_LOADMK
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
|
|
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
|
|
#define CONFIG_SYS_I2C_OMAP34XX
|
|
|
|
/*
|
|
* TWL4030
|
|
*/
|
|
#define CONFIG_TWL4030_POWER 1
|
|
|
|
/* Environment information */
|
|
#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */
|
|
#define CONFIG_BOOTDELAY 0
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_STOP_STR "S"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"silent=true\0" \
|
|
"loadaddr=0x82000000\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"mpurate=600\0" \
|
|
"vram=12M\0" \
|
|
"dvimode=1024x768-24@60\0" \
|
|
"defaultdisplay=dvi\0" \
|
|
"loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
|
|
"/lib/firmware/mvblx/${fpgafilename}; then " \
|
|
"fpga load 0 ${loadaddr} ${filesize}; " \
|
|
"fi;\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"mmcrootfstype=ext3 rootwait\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"mpurate=${mpurate} " \
|
|
"vram=${vram} " \
|
|
"omapfb.mode=dvi:${dvimode} " \
|
|
"omapfb.debug=y " \
|
|
"omapdss.def_disp=${defaultdisplay} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype} " \
|
|
"mvfw.fpgavers=${fpgavers} " \
|
|
"${cmdline_suffix}\0" \
|
|
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
|
|
"importbootenv=echo Importing environment from mmc ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"mmcbootcmd= " \
|
|
"echo Trying mmc${mmcdev}; " \
|
|
"mmc dev ${mmcdev}; " \
|
|
"if mmc rescan; then " \
|
|
"setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \
|
|
"echo SD/MMC found on device ${mmcdev};" \
|
|
"if run loadbootenv; then " \
|
|
"echo Loading boot environment from mmc${mmcdev}; " \
|
|
"run importbootenv; " \
|
|
"fi;" \
|
|
"run loadfpga; " \
|
|
"if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...;" \
|
|
"run uenvcmd;" \
|
|
"fi;" \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"fi;" \
|
|
"fi\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv mmcdev 1;" \
|
|
"run mmcbootcmd || " \
|
|
"setenv mmcdev 0;" \
|
|
"run mmcbootcmd"
|
|
|
|
|
|
#define CONFIG_AUTO_COMPLETE 1
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT "mvblx # "
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
|
|
|
#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */
|
|
#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */
|
|
#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
|
|
|
|
/* default load address */
|
|
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
|
|
|
|
/*
|
|
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
|
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
|
* This rate is divided by a local divisor.
|
|
*/
|
|
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
|
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
|
|
|
#define CONFIG_ENV_IS_NOWHERE 1
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Network Subsystem (SMSC9211 Ethernet from SMSC9118 family)
|
|
*----------------------------------------------------------------------------
|
|
*/
|
|
#if defined(CONFIG_CMD_NET)
|
|
#define CONFIG_SMC911X 1
|
|
#define CONFIG_SMC911X_32_BIT
|
|
#define CONFIG_SMC911X_BASE 0x2C000000
|
|
#endif /* (CONFIG_CMD_NET) */
|
|
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#define CONFIG_FPGA
|
|
#define CONFIG_FPGA_ALTERA
|
|
#define CONFIG_FPGA_CYCLON2
|
|
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */
|
|
#define CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 2
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_OMAP3_SPI
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
|
|
#endif /* __CONFIG_H */
|