mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-15 15:53:26 +08:00
2b12f6cfe6
Use the Kconfig option to select the PCIe reset errata. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
625 lines
20 KiB
C
625 lines
20 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
/*
|
|
* mpc8572ds board configuration file
|
|
*
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "../board/freescale/common/ics307_clk.h"
|
|
|
|
#ifndef CONFIG_RESET_VECTOR_ADDRESS
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_MONITOR_BASE
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
#endif
|
|
|
|
/* High Level Configuration Options */
|
|
|
|
#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */
|
|
#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */
|
|
#define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */
|
|
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
|
|
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
|
|
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */
|
|
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
|
|
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
|
|
#define CONFIG_ENABLE_36BIT_PHYS 1
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_ADDR_MAP 1
|
|
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x7fffffff
|
|
|
|
/*
|
|
* Config the L2 Cache as L2 SRAM
|
|
*/
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull
|
|
#else
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#endif
|
|
#define CONFIG_SYS_L2_SIZE (512 << 10)
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
|
|
#define CONFIG_SYS_CCSRBAR 0xffe00000
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
|
|
|
|
#if defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
|
|
#endif
|
|
|
|
/* DDR Setup */
|
|
#define CONFIG_VERY_BIG_RAM
|
|
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
|
|
#define CONFIG_DDR_SPD
|
|
|
|
#define CONFIG_DDR_ECC
|
|
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
|
|
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
|
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
|
|
|
|
/* I2C addresses of SPD EEPROMs */
|
|
#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */
|
|
#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */
|
|
#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */
|
|
|
|
/* These are used when DDR doesn't use SPD. */
|
|
#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
|
|
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
|
|
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */
|
|
#define CONFIG_SYS_DDR_TIMING_3 0x00020000
|
|
#define CONFIG_SYS_DDR_TIMING_0 0x00260802
|
|
#define CONFIG_SYS_DDR_TIMING_1 0x626b2634
|
|
#define CONFIG_SYS_DDR_TIMING_2 0x062874cf
|
|
#define CONFIG_SYS_DDR_MODE_1 0x00440462
|
|
#define CONFIG_SYS_DDR_MODE_2 0x00000000
|
|
#define CONFIG_SYS_DDR_INTERVAL 0x0c300100
|
|
#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
|
|
#define CONFIG_SYS_DDR_CLK_CTRL 0x00800000
|
|
#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
|
|
#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
|
|
#define CONFIG_SYS_DDR_CONTROL 0xc3000008 /* Type = DDR2 */
|
|
#define CONFIG_SYS_DDR_CONTROL2 0x24400000
|
|
|
|
#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
|
|
#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
|
|
#define CONFIG_SYS_DDR_SBE 0x00010000
|
|
|
|
/*
|
|
* Make sure required options are set
|
|
*/
|
|
#ifndef CONFIG_SPD_EEPROM
|
|
#error ("CONFIG_SPD_EEPROM is required")
|
|
#endif
|
|
|
|
#undef CONFIG_CLOCKS_IN_MHZ
|
|
|
|
/*
|
|
* Memory map
|
|
*
|
|
* 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
|
|
* 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable
|
|
* 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable
|
|
* 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable
|
|
*
|
|
* Localbus cacheable (TBD)
|
|
* 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable
|
|
*
|
|
* Localbus non-cacheable
|
|
* 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable
|
|
* 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable
|
|
* 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable
|
|
* 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0
|
|
* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
|
|
* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
|
|
*/
|
|
|
|
/*
|
|
* Local Bus Definitions
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
|
|
#else
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
|
|
#endif
|
|
|
|
#define CONFIG_FLASH_BR_PRELIM \
|
|
(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
|
|
#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
|
|
|
|
#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
|
|
#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
|
|
#undef CONFIG_SYS_FLASH_CHECKSUM
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#undef CONFIG_SYS_RAMBOOT
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
|
|
|
|
#define CONFIG_HWCONFIG /* enable hwconfig */
|
|
#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
|
|
#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define PIXIS_BASE_PHYS 0xfffdf0000ull
|
|
#else
|
|
#define PIXIS_BASE_PHYS PIXIS_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
|
|
#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
|
|
|
|
#define PIXIS_ID 0x0 /* Board ID at offset 0 */
|
|
#define PIXIS_VER 0x1 /* Board version at offset 1 */
|
|
#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
|
|
#define PIXIS_CSR 0x3 /* PIXIS General control/status register */
|
|
#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
|
|
#define PIXIS_PWR 0x5 /* PIXIS Power status register */
|
|
#define PIXIS_AUX 0x6 /* Auxiliary 1 register */
|
|
#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
|
|
#define PIXIS_AUX2 0x8 /* Auxiliary 2 register */
|
|
#define PIXIS_VCTL 0x10 /* VELA Control Register */
|
|
#define PIXIS_VSTAT 0x11 /* VELA Status Register */
|
|
#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
|
|
#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
|
|
#define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */
|
|
#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
|
|
#define PIXIS_VBOOT_LBMAP 0xc0 /* VBOOT - CFG_LBMAP */
|
|
#define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */
|
|
#define PIXIS_VBOOT_LBMAP_PJET 0x01 /* cfg_lbmap - boot from projet */
|
|
#define PIXIS_VBOOT_LBMAP_NAND 0x02 /* cfg_lbmap - boot from NAND */
|
|
#define PIXIS_VBOOT_LBMAP_NOR1 0x03 /* cfg_lbmap - boot from NOR 1 */
|
|
#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
|
|
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
|
|
#define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */
|
|
#define PIXIS_VSYSCLK0 0x1C /* VELA SYSCLK0 Register */
|
|
#define PIXIS_VSYSCLK1 0x1D /* VELA SYSCLK1 Register */
|
|
#define PIXIS_VSYSCLK2 0x1E /* VELA SYSCLK2 Register */
|
|
#define PIXIS_VDDRCLK0 0x1F /* VELA DDRCLK0 Register */
|
|
#define PIXIS_VDDRCLK1 0x20 /* VELA DDRCLK1 Register */
|
|
#define PIXIS_VDDRCLK2 0x21 /* VELA DDRCLK2 Register */
|
|
#define PIXIS_VWATCH 0x24 /* Watchdog Register */
|
|
#define PIXIS_LED 0x25 /* LED Register */
|
|
|
|
#define PIXIS_SPD_SYSCLK_MASK 0x7 /* SYSCLK option */
|
|
|
|
/* old pixis referenced names */
|
|
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
|
|
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
|
|
#define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0
|
|
#define PIXIS_VSPEED2_TSEC1SER 0x8
|
|
#define PIXIS_VSPEED2_TSEC2SER 0x4
|
|
#define PIXIS_VSPEED2_TSEC3SER 0x2
|
|
#define PIXIS_VSPEED2_TSEC4SER 0x1
|
|
#define PIXIS_VCFGEN1_TSEC1SER 0x20
|
|
#define PIXIS_VCFGEN1_TSEC2SER 0x20
|
|
#define PIXIS_VCFGEN1_TSEC3SER 0x20
|
|
#define PIXIS_VCFGEN1_TSEC4SER 0x20
|
|
#define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \
|
|
| PIXIS_VSPEED2_TSEC2SER \
|
|
| PIXIS_VSPEED2_TSEC3SER \
|
|
| PIXIS_VSPEED2_TSEC4SER)
|
|
#define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \
|
|
| PIXIS_VCFGEN1_TSEC2SER \
|
|
| PIXIS_VCFGEN1_TSEC3SER \
|
|
| PIXIS_VCFGEN1_TSEC4SER)
|
|
|
|
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
|
|
|
|
#ifndef CONFIG_NAND_SPL
|
|
#define CONFIG_SYS_NAND_BASE 0xffa00000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
|
|
#else
|
|
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
|
|
#endif
|
|
#else
|
|
#define CONFIG_SYS_NAND_BASE 0xfff00000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull
|
|
#else
|
|
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\
|
|
CONFIG_SYS_NAND_BASE + 0x40000, \
|
|
CONFIG_SYS_NAND_BASE + 0x80000,\
|
|
CONFIG_SYS_NAND_BASE + 0xC0000}
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 4
|
|
#define CONFIG_NAND_FSL_ELBC 1
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_MAX_OOBFREE 5
|
|
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
|
|
|
|
/* NAND boot: 4K NAND loader config */
|
|
#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
|
|
#define CONFIG_SYS_NAND_U_BOOT_START \
|
|
(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
|
|
#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
|
|
|
|
/* NAND flash config */
|
|
#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
|
| BR_MS_FCM /* MSEL = FCM */ \
|
|
| BR_V) /* valid */
|
|
#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
|
|
| OR_FCM_PGS /* Large Page*/ \
|
|
| OR_FCM_CSCT \
|
|
| OR_FCM_CST \
|
|
| OR_FCM_CHT \
|
|
| OR_FCM_SCY_1 \
|
|
| OR_FCM_TRLX \
|
|
| OR_FCM_EHTR)
|
|
|
|
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
|
|
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
|
|
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
|
|
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
|
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
|
| BR_MS_FCM /* MSEL = FCM */ \
|
|
| BR_V) /* valid */
|
|
#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
|
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
|
| BR_MS_FCM /* MSEL = FCM */ \
|
|
| BR_V) /* valid */
|
|
#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
|
|
#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
|
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
|
| BR_MS_FCM /* MSEL = FCM */ \
|
|
| BR_V) /* valid */
|
|
#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
|
|
|
|
/* Serial Port - controlled on board with jumper J8
|
|
* open - index 2
|
|
* shorted - index 1
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
|
#ifdef CONFIG_NAND_SPL
|
|
#define CONFIG_NS16550_MIN_FUNCTIONS
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
|
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
|
|
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
|
|
|
/*
|
|
* I2C2 EEPROM
|
|
*/
|
|
#define CONFIG_ID_EEPROM
|
|
#ifdef CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
|
#endif
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 1
|
|
|
|
/*
|
|
* General PCI
|
|
* Memory space is mapped 1-1, but I/O space must start from 0.
|
|
*/
|
|
|
|
/* controller 3, direct to uli, tgtid 3, Base address 8000 */
|
|
#define CONFIG_SYS_PCIE3_NAME "ULI"
|
|
#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
|
|
#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
|
|
#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
/* controller 2, Slot 2, tgtid 2, Base address 9000 */
|
|
#define CONFIG_SYS_PCIE2_NAME "Slot 1"
|
|
#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
|
|
#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
/* controller 1, Slot 1, tgtid 1, Base address a000 */
|
|
#define CONFIG_SYS_PCIE1_NAME "Slot 2"
|
|
#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
/*PCIE video card used*/
|
|
#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT
|
|
|
|
/* video */
|
|
|
|
#if defined(CONFIG_VIDEO)
|
|
#define CONFIG_BIOSEMU
|
|
#define CONFIG_ATI_RADEON_FB
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
|
|
#endif
|
|
|
|
#undef CONFIG_EEPRO100
|
|
#undef CONFIG_TULIP
|
|
|
|
#ifndef CONFIG_PCI_PNP
|
|
#define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS
|
|
#define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS
|
|
#define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */
|
|
#endif
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
|
|
#ifdef CONFIG_SCSI_AHCI
|
|
#define CONFIG_SATA_ULI5288
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
|
|
#endif /* SCSI */
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
|
|
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "eTSEC1"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "eTSEC2"
|
|
#define CONFIG_TSEC3 1
|
|
#define CONFIG_TSEC3_NAME "eTSEC3"
|
|
#define CONFIG_TSEC4 1
|
|
#define CONFIG_TSEC4_NAME "eTSEC4"
|
|
|
|
#define CONFIG_PIXIS_SGMII_CMD
|
|
#define CONFIG_FSL_SGMII_RISER 1
|
|
#define SGMII_RISER_PHY_OFFSET 0x1c
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
#define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */
|
|
#endif
|
|
|
|
#define TSEC1_PHY_ADDR 0
|
|
#define TSEC2_PHY_ADDR 1
|
|
#define TSEC3_PHY_ADDR 2
|
|
#define TSEC4_PHY_ADDR 3
|
|
|
|
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC3_PHYIDX 0
|
|
#define TSEC4_PHYIDX 0
|
|
|
|
#define CONFIG_ETHPRIME "eTSEC1"
|
|
#endif /* CONFIG_TSEC_ENET */
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
|
|
#if defined(CONFIG_SYS_RAMBOOT)
|
|
|
|
#else
|
|
#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
|
|
#define CONFIG_ENV_ADDR 0xfff80000
|
|
#else
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
|
#endif
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_PCI_EHCI_DEVICE 0
|
|
#endif
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 64 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#endif
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
#define CONFIG_HAS_ETH3
|
|
#endif
|
|
|
|
#define CONFIG_IPADDR 192.168.1.254
|
|
|
|
#define CONFIG_HOSTNAME "unknown"
|
|
#define CONFIG_ROOTPATH "/opt/nfsroot"
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
|
|
|
|
#define CONFIG_SERVERIP 192.168.1.1
|
|
#define CONFIG_GATEWAYIP 192.168.1.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
|
|
/* default location for tftp and bootm */
|
|
#define CONFIG_LOADADDR 1000000
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0" \
|
|
"netdev=eth0\0" \
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
|
"tftpflash=tftpboot $loadaddr $uboot; " \
|
|
"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +$filesize; " \
|
|
"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +$filesize; " \
|
|
"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" $filesize; " \
|
|
"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +$filesize; " \
|
|
"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" $filesize\0" \
|
|
"consoledev=ttyS0\0" \
|
|
"ramdiskaddr=2000000\0" \
|
|
"ramdiskfile=8572ds/ramdisk.uboot\0" \
|
|
"fdtaddr=1e00000\0" \
|
|
"fdtfile=8572ds/mpc8572ds.dtb\0" \
|
|
"bdev=sda3\0"
|
|
|
|
#define CONFIG_HDBOOT \
|
|
"setenv bootargs root=/dev/$bdev rw " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
|
|
|
|
#endif /* __CONFIG_H */
|