mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-30 08:03:32 +08:00
336d4615f8
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
194 lines
4.0 KiB
C
194 lines
4.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
*
|
|
* Derived from linux/arch/mips/bcm63xx/usb-common.c:
|
|
* Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
|
|
* Copyright 2013 Florian Fainelli <florian@openwrt.org>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <generic-phy.h>
|
|
#include <malloc.h>
|
|
#include <power-domain.h>
|
|
#include <reset.h>
|
|
#include <asm/io.h>
|
|
#include <dm/device.h>
|
|
|
|
/* USBH PLL Control register */
|
|
#define USBH_PLL_REG 0x18
|
|
#define USBH_PLL_IDDQ_PWRDN BIT(9)
|
|
#define USBH_PLL_PWRDN_DELAY BIT(10)
|
|
|
|
/* USBH Swap Control register */
|
|
#define USBH_SWAP_REG 0x1c
|
|
#define USBH_SWAP_OHCI_DATA BIT(0)
|
|
#define USBH_SWAP_OHCI_ENDIAN BIT(1)
|
|
#define USBH_SWAP_EHCI_DATA BIT(3)
|
|
#define USBH_SWAP_EHCI_ENDIAN BIT(4)
|
|
|
|
/* USBH Setup register */
|
|
#define USBH_SETUP_REG 0x28
|
|
#define USBH_SETUP_IOC BIT(4)
|
|
#define USBH_SETUP_IPP BIT(5)
|
|
|
|
struct bcm6368_usbh_hw {
|
|
uint32_t setup_clr;
|
|
uint32_t pll_clr;
|
|
};
|
|
|
|
struct bcm6368_usbh_priv {
|
|
const struct bcm6368_usbh_hw *hw;
|
|
void __iomem *regs;
|
|
};
|
|
|
|
static int bcm6368_usbh_init(struct phy *phy)
|
|
{
|
|
struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev);
|
|
const struct bcm6368_usbh_hw *hw = priv->hw;
|
|
|
|
/* configure to work in native cpu endian */
|
|
clrsetbits_be32(priv->regs + USBH_SWAP_REG,
|
|
USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
|
|
USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
|
|
|
|
/* setup config */
|
|
if (hw->setup_clr)
|
|
clrbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_clr);
|
|
|
|
setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
|
|
|
|
/* enable pll control */
|
|
if (hw->pll_clr)
|
|
clrbits_be32(priv->regs + USBH_PLL_REG, hw->pll_clr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops bcm6368_usbh_ops = {
|
|
.init = bcm6368_usbh_init,
|
|
};
|
|
|
|
static const struct bcm6368_usbh_hw bcm6328_hw = {
|
|
.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
|
|
.setup_clr = 0,
|
|
};
|
|
|
|
static const struct bcm6368_usbh_hw bcm6362_hw = {
|
|
.pll_clr = 0,
|
|
.setup_clr = 0,
|
|
};
|
|
|
|
static const struct bcm6368_usbh_hw bcm6368_hw = {
|
|
.pll_clr = 0,
|
|
.setup_clr = 0,
|
|
};
|
|
|
|
static const struct bcm6368_usbh_hw bcm63268_hw = {
|
|
.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
|
|
.setup_clr = USBH_SETUP_IPP,
|
|
};
|
|
|
|
static const struct udevice_id bcm6368_usbh_ids[] = {
|
|
{
|
|
.compatible = "brcm,bcm6328-usbh",
|
|
.data = (ulong)&bcm6328_hw,
|
|
}, {
|
|
.compatible = "brcm,bcm6362-usbh",
|
|
.data = (ulong)&bcm6362_hw,
|
|
}, {
|
|
.compatible = "brcm,bcm6368-usbh",
|
|
.data = (ulong)&bcm6368_hw,
|
|
}, {
|
|
.compatible = "brcm,bcm63268-usbh",
|
|
.data = (ulong)&bcm63268_hw,
|
|
}, { /* sentinel */ }
|
|
};
|
|
|
|
static int bcm6368_usbh_probe(struct udevice *dev)
|
|
{
|
|
struct bcm6368_usbh_priv *priv = dev_get_priv(dev);
|
|
const struct bcm6368_usbh_hw *hw =
|
|
(const struct bcm6368_usbh_hw *)dev_get_driver_data(dev);
|
|
#if defined(CONFIG_POWER_DOMAIN)
|
|
struct power_domain pwr_dom;
|
|
#endif
|
|
struct reset_ctl rst_ctl;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
priv->regs = dev_remap_addr(dev);
|
|
if (!priv->regs)
|
|
return -EINVAL;
|
|
|
|
priv->hw = hw;
|
|
|
|
/* enable usbh clock */
|
|
ret = clk_get_by_name(dev, "usbh", &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_free(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
#if defined(CONFIG_POWER_DOMAIN)
|
|
/* enable power domain */
|
|
ret = power_domain_get(dev, &pwr_dom);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = power_domain_on(&pwr_dom);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = power_domain_free(&pwr_dom);
|
|
if (ret < 0)
|
|
return ret;
|
|
#endif
|
|
|
|
/* perform reset */
|
|
ret = reset_get_by_index(dev, 0, &rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = reset_deassert(&rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = reset_free(&rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* enable usb_ref clock */
|
|
ret = clk_get_by_name(dev, "usb_ref", &clk);
|
|
if (!ret) {
|
|
ret = clk_enable(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_free(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
mdelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(bcm6368_usbh) = {
|
|
.name = "bcm6368-usbh",
|
|
.id = UCLASS_PHY,
|
|
.of_match = bcm6368_usbh_ids,
|
|
.ops = &bcm6368_usbh_ops,
|
|
.priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv),
|
|
.probe = bcm6368_usbh_probe,
|
|
};
|