mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-16 00:03:26 +08:00
e6c8b716c7
rework and unify i2c address names for different SoCs, which use the mxc_i2c driver. Signed-off-by: Heiko Schocher <hs@denx.de>
779 lines
19 KiB
C
779 lines
19 KiB
C
/*
|
|
* i2c driver for Freescale i.MX series
|
|
*
|
|
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
* (c) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on i2c-imx.c from linux kernel:
|
|
* Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
|
|
* Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
|
|
* Copyright (C) 2007 RightHand Technologies, Inc.
|
|
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
|
|
*
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/imx-common/mxc_i2c.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include <watchdog.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define I2C_QUIRK_FLAG (1 << 0)
|
|
|
|
#define IMX_I2C_REGSHIFT 2
|
|
#define VF610_I2C_REGSHIFT 0
|
|
/* Register index */
|
|
#define IADR 0
|
|
#define IFDR 1
|
|
#define I2CR 2
|
|
#define I2SR 3
|
|
#define I2DR 4
|
|
|
|
#define I2CR_IIEN (1 << 6)
|
|
#define I2CR_MSTA (1 << 5)
|
|
#define I2CR_MTX (1 << 4)
|
|
#define I2CR_TX_NO_AK (1 << 3)
|
|
#define I2CR_RSTA (1 << 2)
|
|
|
|
#define I2SR_ICF (1 << 7)
|
|
#define I2SR_IBB (1 << 5)
|
|
#define I2SR_IAL (1 << 4)
|
|
#define I2SR_IIF (1 << 1)
|
|
#define I2SR_RX_NO_AK (1 << 0)
|
|
|
|
#ifdef I2C_QUIRK_REG
|
|
#define I2CR_IEN (0 << 7)
|
|
#define I2CR_IDIS (1 << 7)
|
|
#define I2SR_IIF_CLEAR (1 << 1)
|
|
#else
|
|
#define I2CR_IEN (1 << 7)
|
|
#define I2CR_IDIS (0 << 7)
|
|
#define I2SR_IIF_CLEAR (0 << 1)
|
|
#endif
|
|
|
|
#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
|
|
#error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
|
|
#endif
|
|
|
|
#ifdef I2C_QUIRK_REG
|
|
static u16 i2c_clk_div[60][2] = {
|
|
{ 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
|
|
{ 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
|
|
{ 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
|
|
{ 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
|
|
{ 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
|
|
{ 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
|
|
{ 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
|
|
{ 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
|
|
{ 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
|
|
{ 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
|
|
{ 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
|
|
{ 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
|
|
{ 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
|
|
{ 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
|
|
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
|
|
};
|
|
#else
|
|
static u16 i2c_clk_div[50][2] = {
|
|
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
|
|
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
|
|
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
|
|
{ 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
|
|
{ 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
|
|
{ 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
|
|
{ 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
|
|
{ 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
|
|
{ 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
|
|
{ 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
|
|
{ 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
|
|
{ 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
|
|
{ 3072, 0x1E }, { 3840, 0x1F }
|
|
};
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_MXC_I2C1_SPEED
|
|
#define CONFIG_SYS_MXC_I2C1_SPEED 100000
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C2_SPEED
|
|
#define CONFIG_SYS_MXC_I2C2_SPEED 100000
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C3_SPEED
|
|
#define CONFIG_SYS_MXC_I2C3_SPEED 100000
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C4_SPEED
|
|
#define CONFIG_SYS_MXC_I2C4_SPEED 100000
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_MXC_I2C1_SLAVE
|
|
#define CONFIG_SYS_MXC_I2C1_SLAVE 0
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C2_SLAVE
|
|
#define CONFIG_SYS_MXC_I2C2_SLAVE 0
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C3_SLAVE
|
|
#define CONFIG_SYS_MXC_I2C3_SLAVE 0
|
|
#endif
|
|
#ifndef CONFIG_SYS_MXC_I2C4_SLAVE
|
|
#define CONFIG_SYS_MXC_I2C4_SLAVE 0
|
|
#endif
|
|
|
|
/*
|
|
* Calculate and set proper clock divider
|
|
*/
|
|
static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate)
|
|
{
|
|
unsigned int i2c_clk_rate;
|
|
unsigned int div;
|
|
u8 clk_div;
|
|
|
|
#if defined(CONFIG_MX31)
|
|
struct clock_control_regs *sc_regs =
|
|
(struct clock_control_regs *)CCM_BASE;
|
|
|
|
/* start the required I2C clock */
|
|
writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET),
|
|
&sc_regs->cgr0);
|
|
#endif
|
|
|
|
/* Divider value calculation */
|
|
i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
|
|
div = (i2c_clk_rate + rate - 1) / rate;
|
|
if (div < i2c_clk_div[0][0])
|
|
clk_div = 0;
|
|
else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
|
|
clk_div = ARRAY_SIZE(i2c_clk_div) - 1;
|
|
else
|
|
for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++)
|
|
;
|
|
|
|
/* Store divider value */
|
|
return clk_div;
|
|
}
|
|
|
|
/*
|
|
* Set I2C Bus speed
|
|
*/
|
|
static int bus_i2c_set_bus_speed(struct mxc_i2c_bus *i2c_bus, int speed)
|
|
{
|
|
ulong base = i2c_bus->base;
|
|
bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
|
|
u8 clk_idx = i2c_imx_get_clk(i2c_bus, speed);
|
|
u8 idx = i2c_clk_div[clk_idx][1];
|
|
int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
|
|
if (!base)
|
|
return -ENODEV;
|
|
|
|
/* Store divider value */
|
|
writeb(idx, base + (IFDR << reg_shift));
|
|
|
|
/* Reset module */
|
|
writeb(I2CR_IDIS, base + (I2CR << reg_shift));
|
|
writeb(0, base + (I2SR << reg_shift));
|
|
return 0;
|
|
}
|
|
|
|
#define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
|
|
#define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
|
|
#define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
|
|
|
|
static int wait_for_sr_state(struct mxc_i2c_bus *i2c_bus, unsigned state)
|
|
{
|
|
unsigned sr;
|
|
ulong elapsed;
|
|
bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
|
|
int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
ulong base = i2c_bus->base;
|
|
ulong start_time = get_timer(0);
|
|
for (;;) {
|
|
sr = readb(base + (I2SR << reg_shift));
|
|
if (sr & I2SR_IAL) {
|
|
if (quirk)
|
|
writeb(sr | I2SR_IAL, base +
|
|
(I2SR << reg_shift));
|
|
else
|
|
writeb(sr & ~I2SR_IAL, base +
|
|
(I2SR << reg_shift));
|
|
printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
|
|
__func__, sr, readb(base + (I2CR << reg_shift)),
|
|
state);
|
|
return -ERESTART;
|
|
}
|
|
if ((sr & (state >> 8)) == (unsigned char)state)
|
|
return sr;
|
|
WATCHDOG_RESET();
|
|
elapsed = get_timer(start_time);
|
|
if (elapsed > (CONFIG_SYS_HZ / 10)) /* .1 seconds */
|
|
break;
|
|
}
|
|
printf("%s: failed sr=%x cr=%x state=%x\n", __func__,
|
|
sr, readb(base + (I2CR << reg_shift)), state);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int tx_byte(struct mxc_i2c_bus *i2c_bus, u8 byte)
|
|
{
|
|
int ret;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
ulong base = i2c_bus->base;
|
|
|
|
writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
|
|
writeb(byte, base + (I2DR << reg_shift));
|
|
|
|
ret = wait_for_sr_state(i2c_bus, ST_IIF);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & I2SR_RX_NO_AK)
|
|
return -ENODEV;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Stub implementations for outer i2c slave operations.
|
|
*/
|
|
void __i2c_force_reset_slave(void)
|
|
{
|
|
}
|
|
void i2c_force_reset_slave(void)
|
|
__attribute__((weak, alias("__i2c_force_reset_slave")));
|
|
|
|
/*
|
|
* Stop I2C transaction
|
|
*/
|
|
static void i2c_imx_stop(struct mxc_i2c_bus *i2c_bus)
|
|
{
|
|
int ret;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
ulong base = i2c_bus->base;
|
|
unsigned int temp = readb(base + (I2CR << reg_shift));
|
|
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE);
|
|
if (ret < 0)
|
|
printf("%s:trigger stop failed\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* Send start signal, chip address and
|
|
* write register address
|
|
*/
|
|
static int i2c_init_transfer_(struct mxc_i2c_bus *i2c_bus, u8 chip,
|
|
u32 addr, int alen)
|
|
{
|
|
unsigned int temp;
|
|
int ret;
|
|
bool quirk = i2c_bus->driver_data & I2C_QUIRK_FLAG ? true : false;
|
|
ulong base = i2c_bus->base;
|
|
int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
|
|
/* Reset i2c slave */
|
|
i2c_force_reset_slave();
|
|
|
|
/* Enable I2C controller */
|
|
if (quirk)
|
|
ret = readb(base + (I2CR << reg_shift)) & I2CR_IDIS;
|
|
else
|
|
ret = !(readb(base + (I2CR << reg_shift)) & I2CR_IEN);
|
|
|
|
if (ret) {
|
|
writeb(I2CR_IEN, base + (I2CR << reg_shift));
|
|
/* Wait for controller to be stable */
|
|
udelay(50);
|
|
}
|
|
|
|
if (readb(base + (IADR << reg_shift)) == (chip << 1))
|
|
writeb((chip << 1) ^ 2, base + (IADR << reg_shift));
|
|
writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
|
|
ret = wait_for_sr_state(i2c_bus, ST_BUS_IDLE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Start I2C transaction */
|
|
temp = readb(base + (I2CR << reg_shift));
|
|
temp |= I2CR_MSTA;
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
|
|
ret = wait_for_sr_state(i2c_bus, ST_BUS_BUSY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
temp |= I2CR_MTX | I2CR_TX_NO_AK;
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
|
|
/* write slave address */
|
|
ret = tx_byte(i2c_bus, chip << 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
while (alen--) {
|
|
ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
|
|
{
|
|
if (i2c_bus && i2c_bus->idle_bus_fn)
|
|
return i2c_bus->idle_bus_fn(i2c_bus->idle_bus_data);
|
|
return 0;
|
|
}
|
|
#else
|
|
/*
|
|
* Since pinmux is not supported, implement a weak function here.
|
|
* You can implement your i2c_bus_idle in board file. When pinctrl
|
|
* is supported, this can be removed.
|
|
*/
|
|
int __i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
|
|
__attribute__((weak, alias("__i2c_idle_bus")));
|
|
#endif
|
|
|
|
static int i2c_init_transfer(struct mxc_i2c_bus *i2c_bus, u8 chip,
|
|
u32 addr, int alen)
|
|
{
|
|
int retry;
|
|
int ret;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
|
|
if (!i2c_bus->base)
|
|
return -ENODEV;
|
|
|
|
for (retry = 0; retry < 3; retry++) {
|
|
ret = i2c_init_transfer_(i2c_bus, chip, addr, alen);
|
|
if (ret >= 0)
|
|
return 0;
|
|
i2c_imx_stop(i2c_bus);
|
|
if (ret == -ENODEV)
|
|
return ret;
|
|
|
|
printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
|
|
retry);
|
|
if (ret != -ERESTART)
|
|
/* Disable controller */
|
|
writeb(I2CR_IDIS, i2c_bus->base + (I2CR << reg_shift));
|
|
udelay(100);
|
|
if (i2c_idle_bus(i2c_bus) < 0)
|
|
break;
|
|
}
|
|
printf("%s: give up i2c_regs=0x%lx\n", __func__, i2c_bus->base);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int i2c_write_data(struct mxc_i2c_bus *i2c_bus, u8 chip, const u8 *buf,
|
|
int len)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
|
|
debug("write_data: ");
|
|
/* use rc for counter */
|
|
for (i = 0; i < len; ++i)
|
|
debug(" 0x%02x", buf[i]);
|
|
debug("\n");
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = tx_byte(i2c_bus, buf[i]);
|
|
if (ret < 0) {
|
|
debug("i2c_write_data(): rc=%d\n", ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf,
|
|
int len)
|
|
{
|
|
int ret;
|
|
unsigned int temp;
|
|
int i;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
ulong base = i2c_bus->base;
|
|
|
|
debug("i2c_read_data: chip=0x%x, len=0x%x\n", chip, len);
|
|
|
|
/* setup bus to read data */
|
|
temp = readb(base + (I2CR << reg_shift));
|
|
temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
|
|
if (len == 1)
|
|
temp |= I2CR_TX_NO_AK;
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
|
|
/* dummy read to clear ICF */
|
|
readb(base + (I2DR << reg_shift));
|
|
|
|
/* read data */
|
|
for (i = 0; i < len; i++) {
|
|
ret = wait_for_sr_state(i2c_bus, ST_IIF);
|
|
if (ret < 0) {
|
|
debug("i2c_read_data(): ret=%d\n", ret);
|
|
i2c_imx_stop(i2c_bus);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* It must generate STOP before read I2DR to prevent
|
|
* controller from generating another clock cycle
|
|
*/
|
|
if (i == (len - 1)) {
|
|
i2c_imx_stop(i2c_bus);
|
|
} else if (i == (len - 2)) {
|
|
temp = readb(base + (I2CR << reg_shift));
|
|
temp |= I2CR_TX_NO_AK;
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
}
|
|
writeb(I2SR_IIF_CLEAR, base + (I2SR << reg_shift));
|
|
buf[i] = readb(base + (I2DR << reg_shift));
|
|
}
|
|
|
|
/* reuse ret for counter*/
|
|
for (ret = 0; ret < len; ++ret)
|
|
debug(" 0x%02x", buf[ret]);
|
|
debug("\n");
|
|
|
|
i2c_imx_stop(i2c_bus);
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
/*
|
|
* Read data from I2C device
|
|
*/
|
|
static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
|
|
int alen, u8 *buf, int len)
|
|
{
|
|
int ret = 0;
|
|
u32 temp;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
ulong base = i2c_bus->base;
|
|
|
|
ret = i2c_init_transfer(i2c_bus, chip, addr, alen);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
temp = readb(base + (I2CR << reg_shift));
|
|
temp |= I2CR_RSTA;
|
|
writeb(temp, base + (I2CR << reg_shift));
|
|
|
|
ret = tx_byte(i2c_bus, (chip << 1) | 1);
|
|
if (ret < 0) {
|
|
i2c_imx_stop(i2c_bus);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_read_data(i2c_bus, chip, buf, len);
|
|
|
|
i2c_imx_stop(i2c_bus);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Write data to I2C device
|
|
*/
|
|
static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
|
|
int alen, const u8 *buf, int len)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = i2c_init_transfer(i2c_bus, chip, addr, alen);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_write_data(i2c_bus, chip, buf, len);
|
|
|
|
i2c_imx_stop(i2c_bus);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if !defined(I2C2_BASE_ADDR)
|
|
#define I2C2_BASE_ADDR 0
|
|
#endif
|
|
|
|
#if !defined(I2C3_BASE_ADDR)
|
|
#define I2C3_BASE_ADDR 0
|
|
#endif
|
|
|
|
#if !defined(I2C4_BASE_ADDR)
|
|
#define I2C4_BASE_ADDR 0
|
|
#endif
|
|
|
|
static struct mxc_i2c_bus mxc_i2c_buses[] = {
|
|
#if defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LSCH3)
|
|
{ 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
|
|
{ 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
|
|
{ 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
|
|
{ 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG },
|
|
#else
|
|
{ 0, I2C1_BASE_ADDR, 0 },
|
|
{ 1, I2C2_BASE_ADDR, 0 },
|
|
{ 2, I2C3_BASE_ADDR, 0 },
|
|
{ 3, I2C4_BASE_ADDR, 0 },
|
|
#endif
|
|
};
|
|
|
|
struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap)
|
|
{
|
|
return &mxc_i2c_buses[adap->hwadapnr];
|
|
}
|
|
|
|
static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
|
|
uint addr, int alen, uint8_t *buffer,
|
|
int len)
|
|
{
|
|
return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
|
|
}
|
|
|
|
static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
|
|
uint addr, int alen, uint8_t *buffer,
|
|
int len)
|
|
{
|
|
return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
|
|
}
|
|
|
|
/*
|
|
* Test if a chip at a given address responds (probe the chip)
|
|
*/
|
|
static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
|
|
{
|
|
return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
|
|
}
|
|
|
|
int __enable_i2c_clk(unsigned char enable, unsigned i2c_num)
|
|
{
|
|
return 1;
|
|
}
|
|
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
|
|
__attribute__((weak, alias("__enable_i2c_clk")));
|
|
|
|
void bus_i2c_init(int index, int speed, int unused,
|
|
int (*idle_bus_fn)(void *p), void *idle_bus_data)
|
|
{
|
|
int ret;
|
|
|
|
if (index >= ARRAY_SIZE(mxc_i2c_buses)) {
|
|
debug("Error i2c index\n");
|
|
return;
|
|
}
|
|
|
|
mxc_i2c_buses[index].idle_bus_fn = idle_bus_fn;
|
|
mxc_i2c_buses[index].idle_bus_data = idle_bus_data;
|
|
|
|
ret = enable_i2c_clk(1, index);
|
|
if (ret < 0) {
|
|
debug("I2C-%d clk fail to enable.\n", index);
|
|
return;
|
|
}
|
|
|
|
bus_i2c_set_bus_speed(&mxc_i2c_buses[index], speed);
|
|
}
|
|
|
|
/*
|
|
* Init I2C Bus
|
|
*/
|
|
static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
|
|
{
|
|
bus_i2c_init(adap->hwadapnr, speed, slaveaddr, NULL, NULL);
|
|
}
|
|
|
|
/*
|
|
* Set I2C Speed
|
|
*/
|
|
static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
|
|
{
|
|
return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
|
|
}
|
|
|
|
/*
|
|
* Register mxc i2c adapters
|
|
*/
|
|
U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
|
|
mxc_i2c_read, mxc_i2c_write,
|
|
mxc_i2c_set_bus_speed,
|
|
CONFIG_SYS_MXC_I2C1_SPEED,
|
|
CONFIG_SYS_MXC_I2C1_SLAVE, 0)
|
|
U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
|
|
mxc_i2c_read, mxc_i2c_write,
|
|
mxc_i2c_set_bus_speed,
|
|
CONFIG_SYS_MXC_I2C2_SPEED,
|
|
CONFIG_SYS_MXC_I2C2_SLAVE, 1)
|
|
#ifdef CONFIG_SYS_I2C_MXC_I2C3
|
|
U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
|
|
mxc_i2c_read, mxc_i2c_write,
|
|
mxc_i2c_set_bus_speed,
|
|
CONFIG_SYS_MXC_I2C3_SPEED,
|
|
CONFIG_SYS_MXC_I2C3_SLAVE, 2)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_MXC_I2C4
|
|
U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe,
|
|
mxc_i2c_read, mxc_i2c_write,
|
|
mxc_i2c_set_bus_speed,
|
|
CONFIG_SYS_MXC_I2C4_SPEED,
|
|
CONFIG_SYS_MXC_I2C4_SLAVE, 3)
|
|
#endif
|
|
|
|
#else
|
|
|
|
static int mxc_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
|
|
return bus_i2c_set_bus_speed(i2c_bus, speed);
|
|
}
|
|
|
|
static int mxc_i2c_probe(struct udevice *bus)
|
|
{
|
|
struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
fdt_addr_t addr;
|
|
int ret;
|
|
|
|
i2c_bus->driver_data = dev_get_driver_data(bus);
|
|
|
|
addr = dev_get_addr(bus);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -ENODEV;
|
|
|
|
i2c_bus->base = addr;
|
|
i2c_bus->index = bus->seq;
|
|
|
|
/* Enable clk */
|
|
ret = enable_i2c_clk(1, bus->seq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_idle_bus(i2c_bus);
|
|
if (ret < 0) {
|
|
/* Disable clk */
|
|
enable_i2c_clk(0, bus->seq);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Pinmux settings are in board file now, until pinmux is supported,
|
|
* we can set pinmux here in probe function.
|
|
*/
|
|
|
|
debug("i2c : controller bus %d at %lu , speed %d: ",
|
|
bus->seq, i2c_bus->base,
|
|
i2c_bus->speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
|
|
u32 chip_flags)
|
|
{
|
|
int ret;
|
|
struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
|
|
ret = i2c_init_transfer(i2c_bus, chip_addr, 0, 0);
|
|
if (ret < 0) {
|
|
debug("%s failed, ret = %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_imx_stop(i2c_bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
|
|
int ret = 0;
|
|
ulong base = i2c_bus->base;
|
|
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
|
|
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
|
|
|
|
/*
|
|
* Here the 3rd parameter addr and the 4th one alen are set to 0,
|
|
* because here we only want to send out chip address. The register
|
|
* address is wrapped in msg.
|
|
*/
|
|
ret = i2c_init_transfer(i2c_bus, msg->addr, 0, 0);
|
|
if (ret < 0) {
|
|
debug("i2c_init_transfer error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
|
|
msg->len);
|
|
else {
|
|
ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
|
|
msg->len);
|
|
if (ret)
|
|
break;
|
|
if (next_is_read) {
|
|
/* Reuse ret */
|
|
ret = readb(base + (I2CR << reg_shift));
|
|
ret |= I2CR_RSTA;
|
|
writeb(ret, base + (I2CR << reg_shift));
|
|
|
|
ret = tx_byte(i2c_bus, (msg->addr << 1) | 1);
|
|
if (ret < 0) {
|
|
i2c_imx_stop(i2c_bus);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
debug("i2c_write: error sending\n");
|
|
|
|
i2c_imx_stop(i2c_bus);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dm_i2c_ops mxc_i2c_ops = {
|
|
.xfer = mxc_i2c_xfer,
|
|
.probe_chip = mxc_i2c_probe_chip,
|
|
.set_bus_speed = mxc_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id mxc_i2c_ids[] = {
|
|
{ .compatible = "fsl,imx21-i2c", },
|
|
{ .compatible = "fsl,vf610-i2c", .data = I2C_QUIRK_FLAG, },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_mxc) = {
|
|
.name = "i2c_mxc",
|
|
.id = UCLASS_I2C,
|
|
.of_match = mxc_i2c_ids,
|
|
.probe = mxc_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct mxc_i2c_bus),
|
|
.ops = &mxc_i2c_ops,
|
|
};
|
|
#endif
|