mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 12:44:23 +08:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
242 lines
3.8 KiB
C
242 lines
3.8 KiB
C
/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
|
|
|
|
#include <common.h>
|
|
#include <ssi.h>
|
|
|
|
|
|
#ifdef CONFIG_MW_EEPROM
|
|
|
|
/*
|
|
* Serial EEPROM opcodes, including start bit
|
|
*/
|
|
#define EEP_OPC_ERASE 0x7 /* 3-bit opcode */
|
|
#define EEP_OPC_WRITE 0x5 /* 3-bit opcode */
|
|
#define EEP_OPC_READ 0x6 /* 3-bit opcode */
|
|
|
|
#define EEP_OPC_ERASE_ALL 0x12 /* 5-bit opcode */
|
|
#define EEP_OPC_ERASE_EN 0x13 /* 5-bit opcode */
|
|
#define EEP_OPC_WRITE_ALL 0x11 /* 5-bit opcode */
|
|
#define EEP_OPC_ERASE_DIS 0x10 /* 5-bit opcode */
|
|
|
|
static int addrlen;
|
|
|
|
static void mw_eeprom_select(int dev)
|
|
{
|
|
ssi_set_interface(2048, 0, 0, 0);
|
|
ssi_chip_select(0);
|
|
udelay(1);
|
|
ssi_chip_select(dev);
|
|
udelay(1);
|
|
}
|
|
|
|
static int mw_eeprom_size(int dev)
|
|
{
|
|
int x;
|
|
u16 res;
|
|
|
|
mw_eeprom_select(dev);
|
|
ssi_tx_byte(EEP_OPC_READ);
|
|
|
|
res = ssi_txrx_byte(0) << 8;
|
|
res |= ssi_rx_byte();
|
|
for (x = 0; x < 16; x++) {
|
|
if (! (res & 0x8000)) {
|
|
break;
|
|
}
|
|
res <<= 1;
|
|
}
|
|
ssi_chip_select(0);
|
|
|
|
return x;
|
|
}
|
|
|
|
int mw_eeprom_erase_enable(int dev)
|
|
{
|
|
mw_eeprom_select(dev);
|
|
ssi_tx_byte(EEP_OPC_ERASE_EN);
|
|
ssi_tx_byte(0);
|
|
udelay(1);
|
|
ssi_chip_select(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mw_eeprom_erase_disable(int dev)
|
|
{
|
|
mw_eeprom_select(dev);
|
|
ssi_tx_byte(EEP_OPC_ERASE_DIS);
|
|
ssi_tx_byte(0);
|
|
udelay(1);
|
|
ssi_chip_select(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
u32 mw_eeprom_read_word(int dev, int addr)
|
|
{
|
|
u16 rcv;
|
|
u16 res;
|
|
int bits;
|
|
|
|
mw_eeprom_select(dev);
|
|
ssi_tx_byte((EEP_OPC_READ << 5) | ((addr >> (addrlen - 5)) & 0x1f));
|
|
rcv = ssi_txrx_byte(addr << (13 - addrlen));
|
|
res = rcv << (16 - addrlen);
|
|
bits = 4 + addrlen;
|
|
|
|
while (bits>0) {
|
|
rcv = ssi_rx_byte();
|
|
if (bits > 7) {
|
|
res |= rcv << (bits - 8);
|
|
} else {
|
|
res |= rcv >> (8 - bits);
|
|
}
|
|
bits -= 8;
|
|
}
|
|
|
|
ssi_chip_select(0);
|
|
|
|
return res;
|
|
}
|
|
|
|
int mw_eeprom_write_word(int dev, int addr, u16 data)
|
|
{
|
|
u8 byte1=0;
|
|
u8 byte2=0;
|
|
|
|
mw_eeprom_erase_enable(dev);
|
|
mw_eeprom_select(dev);
|
|
|
|
switch (addrlen) {
|
|
case 6:
|
|
byte1 = EEP_OPC_WRITE >> 2;
|
|
byte2 = (EEP_OPC_WRITE << 6)&0xc0;
|
|
byte2 |= addr;
|
|
break;
|
|
case 7:
|
|
byte1 = EEP_OPC_WRITE >> 1;
|
|
byte2 = (EEP_OPC_WRITE << 7)&0x80;
|
|
byte2 |= addr;
|
|
break;
|
|
case 8:
|
|
byte1 = EEP_OPC_WRITE;
|
|
byte2 = addr;
|
|
break;
|
|
case 9:
|
|
byte1 = EEP_OPC_WRITE << 1;
|
|
byte1 |= addr >> 8;
|
|
byte2 = addr & 0xff;
|
|
break;
|
|
case 10:
|
|
byte1 = EEP_OPC_WRITE << 2;
|
|
byte1 |= addr >> 8;
|
|
byte2 = addr & 0xff;
|
|
break;
|
|
default:
|
|
printf("Unsupported number of address bits: %d\n", addrlen);
|
|
return -1;
|
|
|
|
}
|
|
|
|
ssi_tx_byte(byte1);
|
|
ssi_tx_byte(byte2);
|
|
ssi_tx_byte(data >> 8);
|
|
ssi_tx_byte(data & 0xff);
|
|
ssi_chip_select(0);
|
|
udelay(10000); /* Worst case */
|
|
mw_eeprom_erase_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int mw_eeprom_write(int dev, int addr, u8 *buffer, int len)
|
|
{
|
|
int done;
|
|
|
|
done = 0;
|
|
if (addr & 1) {
|
|
u16 temp = mw_eeprom_read_word(dev, addr >> 1);
|
|
temp &= 0xff00;
|
|
temp |= buffer[0];
|
|
|
|
mw_eeprom_write_word(dev, addr >> 1, temp);
|
|
len--;
|
|
addr++;
|
|
buffer++;
|
|
done++;
|
|
}
|
|
|
|
while (len <= 2) {
|
|
mw_eeprom_write_word(dev, addr >> 1, *(u16*)buffer);
|
|
len-=2;
|
|
addr+=2;
|
|
buffer+=2;
|
|
done+=2;
|
|
}
|
|
|
|
if (len) {
|
|
u16 temp = mw_eeprom_read_word(dev, addr >> 1);
|
|
temp &= 0x00ff;
|
|
temp |= buffer[0] << 8;
|
|
|
|
mw_eeprom_write_word(dev, addr >> 1, temp);
|
|
len--;
|
|
addr++;
|
|
buffer++;
|
|
done++;
|
|
}
|
|
|
|
return done;
|
|
}
|
|
|
|
|
|
int mw_eeprom_read(int dev, int addr, u8 *buffer, int len)
|
|
{
|
|
int done;
|
|
|
|
done = 0;
|
|
if (addr & 1) {
|
|
u16 temp = mw_eeprom_read_word(dev, addr >> 1);
|
|
buffer[0]= temp & 0xff;
|
|
|
|
len--;
|
|
addr++;
|
|
buffer++;
|
|
done++;
|
|
}
|
|
|
|
while (len <= 2) {
|
|
*(u16*)buffer = mw_eeprom_read_word(dev, addr >> 1);
|
|
len-=2;
|
|
addr+=2;
|
|
buffer+=2;
|
|
done+=2;
|
|
}
|
|
|
|
if (len) {
|
|
u16 temp = mw_eeprom_read_word(dev, addr >> 1);
|
|
buffer[0] = temp >> 8;
|
|
|
|
len--;
|
|
addr++;
|
|
buffer++;
|
|
done++;
|
|
}
|
|
|
|
return done;
|
|
}
|
|
|
|
int mw_eeprom_probe(int dev)
|
|
{
|
|
addrlen = mw_eeprom_size(dev);
|
|
|
|
if (addrlen < 6 || addrlen > 10) {
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif
|