mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-29 15:43:44 +08:00
7f6bd0da9b
Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase patch] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
498 lines
15 KiB
C
498 lines
15 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
* Ilko Iliev <www.ronetix.at>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Eric Benard <eric@eukrea.com>
|
|
*
|
|
* Configuration settings for the Eukrea CPU9260 board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* to be removed once maemory-map.h is fixed */
|
|
#define AT91_BASE_SYS 0xffffe800
|
|
#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
|
|
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
|
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_AT91SAM9G20
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_AT91SAM9260
|
|
#else
|
|
#error "Unknown board"
|
|
#endif
|
|
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#if defined(CONFIG_NANDBOOT)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_SYS_TEXT_BASE 0x23f00000
|
|
#else
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
#endif
|
|
|
|
/* clocks */
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define MASTER_PLL_DIV 0x01
|
|
#define MASTER_PLL_MUL 0x2B
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define MASTER_PLL_DIV 0x09
|
|
#define MASTER_PLL_MUL 0x61
|
|
#endif
|
|
|
|
/* CKGR_MOR - enable main osc. */
|
|
#define CONFIG_SYS_MOR_VAL \
|
|
(AT91_PMC_MOSCEN | \
|
|
(255 << 8)) /* Main Oscillator Start-up Time */
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
|
|
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
|
|
AT91_PMC_OUT | \
|
|
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_CSS_PLLA | \
|
|
AT91_PMC_PRES_1 | \
|
|
AT91SAM9_PMC_MDIV_6 | \
|
|
AT91_PMC_PDIV_2)
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
CONFIG_SYS_MCKR1_VAL
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_CSS_SLOW | \
|
|
AT91_PMC_PRES_1 | \
|
|
AT91SAM9_PMC_MDIV_2 | \
|
|
AT91_PMC_PDIV_1)
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_CSS_PLLA | \
|
|
AT91_PMC_PRES_1 | \
|
|
AT91SAM9_PMC_MDIV_2 | \
|
|
AT91_PMC_PDIV_1)
|
|
#endif
|
|
|
|
/* define PDC[31:16] as DATA[31:16] */
|
|
#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
|
|
/* no pull-up for D[31:16] */
|
|
#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000
|
|
|
|
/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
|
|
#define CONFIG_SYS_MATRIX_EBICSA_VAL \
|
|
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \
|
|
AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V)
|
|
|
|
/* SDRAM */
|
|
/* SDRAMC_MR Mode register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL
|
|
/* SDRAMC_TR - Refresh Timer register */
|
|
#define CONFIG_SYS_SDRC_TR_VAL1 0x287
|
|
/* SDRAMC_CR - Configuration register*/
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_SDRC_CR_VAL_64MB \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* Write Recovery Delay */ \
|
|
(9 << 12) | /* Row Cycle Delay */ \
|
|
(3 << 16) | /* Row Precharge Delay */ \
|
|
(3 << 20) | /* Row to Column Delay */ \
|
|
(6 << 24) | /* Active to Precharge Delay */ \
|
|
(10 << 28)) /* Exit Self Refresh to Active Delay */
|
|
|
|
#define CONFIG_SYS_SDRC_CR_VAL_128MB \
|
|
(AT91_SDRAMC_NC_10 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* Write Recovery Delay */ \
|
|
(9 << 12) | /* Row Cycle Delay */ \
|
|
(3 << 16) | /* Row Precharge Delay */ \
|
|
(3 << 20) | /* Row to Column Delay */ \
|
|
(6 << 24) | /* Active to Precharge Delay */ \
|
|
(10 << 28)) /* Exit Self Refresh to Active Delay */
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_SDRC_CR_VAL_64MB \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* Write Recovery Delay */ \
|
|
(7 << 12) | /* Row Cycle Delay */ \
|
|
(2 << 16) | /* Row Precharge Delay */ \
|
|
(2 << 20) | /* Row to Column Delay */ \
|
|
(5 << 24) | /* Active to Precharge Delay */ \
|
|
(8 << 28)) /* Exit Self Refresh to Active Delay */
|
|
|
|
#define CONFIG_SYS_SDRC_CR_VAL_128MB \
|
|
(AT91_SDRAMC_NC_10 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_2 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(2 << 8) | /* Write Recovery Delay */ \
|
|
(7 << 12) | /* Row Cycle Delay */ \
|
|
(2 << 16) | /* Row Precharge Delay */ \
|
|
(2 << 20) | /* Row to Column Delay */ \
|
|
(5 << 24) | /* Active to Precharge Delay */ \
|
|
(8 << 28)) /* Exit Self Refresh to Active Delay */
|
|
#endif
|
|
|
|
/* Memory Device Register -> SDRAM */
|
|
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
|
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
|
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
|
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
|
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
|
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
|
|
|
/* setup SMC0, CS0 (NOR Flash) - 16-bit */
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \
|
|
AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \
|
|
AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | \
|
|
AT91_SMC_MODE_TDF_CYCLE(3))
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \
|
|
AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \
|
|
AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | \
|
|
AT91_SMC_MODE_TDF_CYCLE(2))
|
|
#endif
|
|
|
|
/* user reset enable */
|
|
#define CONFIG_SYS_RSTC_RMR_VAL \
|
|
(AT91_RSTC_KEY | \
|
|
AT91_RSTC_CR_PROCRST | \
|
|
AT91_RSTC_MR_ERSTL(1) | \
|
|
AT91_RSTC_MR_ERSTL(2))
|
|
|
|
/* Disable Watchdog */
|
|
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
|
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
|
AT91_WDT_MR_WDV(0xfff) | \
|
|
AT91_WDT_MR_WDDIS | \
|
|
AT91_WDT_MR_WDD(0xfff))
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_AT91SAM9_WATCHDOG
|
|
#define CONFIG_AT91_GPIO
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#undef CONFIG_CMD_BDI
|
|
#undef CONFIG_CMD_IMI
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_LOADS
|
|
#undef CONFIG_CMD_IMLS
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_MII
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M)
|
|
#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
|
|
#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB
|
|
#else
|
|
#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
|
|
#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB
|
|
#endif
|
|
|
|
/* NAND flash */
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
|
|
/* NOR flash */
|
|
#if defined(CONFIG_NANDBOOT)
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#else
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define PHYS_FLASH_2 0x12000000
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST \
|
|
{ PHYS_FLASH_1, PHYS_FLASH_2 }
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT (255+4)
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_MACB_SEARCH_PHY
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
/* LEDS */
|
|
/* Status LED */
|
|
#define CONFIG_STATUS_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
#define STATUS_LED_RED 0
|
|
#define STATUS_LED_GREEN 1
|
|
#define STATUS_LED_YELLOW 2
|
|
#define STATUS_LED_BLUE 3
|
|
/* Red */
|
|
#define STATUS_LED_BIT STATUS_LED_RED
|
|
#define STATUS_LED_STATE STATUS_LED_OFF
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
/* Green */
|
|
#define STATUS_LED_BIT1 STATUS_LED_GREEN
|
|
#define STATUS_LED_STATE1 STATUS_LED_OFF
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
|
|
/* Yellow */
|
|
#define STATUS_LED_BIT2 STATUS_LED_YELLOW
|
|
#define STATUS_LED_STATE2 STATUS_LED_OFF
|
|
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
|
|
/* Blue */
|
|
#define STATUS_LED_BIT3 STATUS_LED_BLUE
|
|
#define STATUS_LED_STATE3 STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2)
|
|
/* Optional value */
|
|
#define STATUS_LED_BOOT STATUS_LED_BIT
|
|
|
|
#define CONFIG_RED_LED AT91_PIO_PORTC, 11
|
|
#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12
|
|
#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7
|
|
#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20"
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
#endif
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000
|
|
#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END \
|
|
(CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
|
|
|
|
#if defined(CONFIG_NANDBOOT)
|
|
#define CONFIG_SYS_USE_NANDFLASH
|
|
#undef CONFIG_SYS_USE_FLASH
|
|
#else
|
|
#define CONFIG_SYS_USE_FLASH
|
|
#undef CONFIG_SYS_USE_NANDFLASH
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_BASEDIR "cpu9G20"
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_BASEDIR "cpu9260"
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_USE_FLASH)
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x40000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
|
|
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=physmap-flash.0:" \
|
|
"256k(u-boot)ro," \
|
|
"128k(u-boot-env)ro," \
|
|
"1792k(kernel)," \
|
|
"-(rootfs);" \
|
|
"atmel_nand:-(nand)"
|
|
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 "
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"partition=nand0,0\0" \
|
|
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
|
"ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \
|
|
"run ramargs;bootm 22000000\0" \
|
|
"flashboot=run ramargs;bootm 0x10060000\0" \
|
|
"basedir=" CONFIG_SYS_BASEDIR "\0" \
|
|
"updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \
|
|
"off 0x10000000 0x1003ffff;erase 0x10000000 " \
|
|
"0x1003ffff;cp.b 0x24000000 0x10000000 " \
|
|
"$(filesize)\0" \
|
|
"updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \
|
|
" 0x10060000 0x1021ffff;erase 0x10060000 " \
|
|
"0x1021ffff;cp.b 0x24000000 0x10060000 " \
|
|
"$(filesize)\0" \
|
|
"updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \
|
|
"protect off 0x10220000 0x13ffffff;erase " \
|
|
"0x10220000 0x13ffffff;cp.b 0x24000000 " \
|
|
"0x10220000 $(filesize)\0" \
|
|
""
|
|
#elif defined(CONFIG_NANDBOOT)
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
|
|
#define MTDIDS_DEFAULT "nand0=atmel_nand"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=atmel_nand:" \
|
|
"128k(bootstrap)ro," \
|
|
"256k(u-boot)ro," \
|
|
"128k(u-boot-env)ro," \
|
|
"128k(u-boot-env2)ro," \
|
|
"2M(kernel)," \
|
|
"-(rootfs)"
|
|
|
|
#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \
|
|
"ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"partition=nand0,5\0" \
|
|
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
|
"ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \
|
|
"run ramargs;bootm 22000000\0" \
|
|
"flashboot=run ramargs; nand read 0x22000000 0xA0000 " \
|
|
"0x200000; bootm 0x22000000\0" \
|
|
"basedir=" CONFIG_SYS_BASEDIR "\0" \
|
|
"u-boot=u-boot-eukrea-cpu9260.bin\0" \
|
|
"kernel=uImage-eukrea-cpu9260.bin\0" \
|
|
"rootfs=image-eukrea-cpu9260.ubi\0" \
|
|
"updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \
|
|
"nand erase 20000 40000; " \
|
|
"nand write ${loadaddr} 20000 40000\0" \
|
|
"updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \
|
|
"nand erase a0000 200000; " \
|
|
"nand write ${loadaddr} a0000 200000\0" \
|
|
"updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \
|
|
"nand erase 2a0000 fd60000; " \
|
|
"nand write ${loadaddr} 2a0000 ${filesize}\0"
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#if defined(CONFIG_CPU9G20)
|
|
#define CONFIG_SYS_PROMPT "CPU9G20=> "
|
|
#elif defined(CONFIG_CPU9260)
|
|
#define CONFIG_SYS_PROMPT "CPU9260=> "
|
|
#endif
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_SILENT_CONSOLE
|
|
#define CONFIG_NETCONSOLE
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN \
|
|
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#endif
|