mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-29 07:33:29 +08:00
a8f2d0e675
On a board with an i.mx28 and a Micron MT29F4G08ABAEAH4, Linux says: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABAEAH4), 512MiB, page size: 4096, OOB size: 224) the ECC strength is 16. root@(none):/sys/devices/virtual/mtd/mtd0# for i in ecc_strength oobsize subpagesize; do echo $i = `cat $i`; done ecc_strength = 16 oobsize = 224 subpagesize = 4096 The ECC strength was not properly discovered by U-Boot causing the data written by Linux to return an -74 (EBADMSG) when read from U-Boot. This patch fixes mxs_nand_get_ecc_strength() to function in case of a NAND flash with page_data_size = 4096 and page_oob_size= 224. Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> |
||
---|---|---|
.. | ||
nand | ||
onenand | ||
spi | ||
ubi | ||
at45.c | ||
cfi_flash.c | ||
cfi_mtd.c | ||
dataflash.c | ||
ftsmc020.c | ||
jedec_flash.c | ||
Makefile | ||
mtdconcat.c | ||
mtdcore.c | ||
mtdpart.c | ||
mw_eeprom.c | ||
st_smi.c |