u-boot/include/configs/k2g_evm.h
Tom Rini 582b4f7f39 Convert CONFIG_CADENCE_QSPI to Kconfig
This converts the following to Kconfig:
   CONFIG_CADENCE_QSPI

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29 13:34:43 -04:00

93 lines
2.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration header file for TI's k2g-evm
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*/
#ifndef __CONFIG_K2G_EVM_H
#define __CONFIG_K2G_EVM_H
#include <environment/ti/mmc.h>
#include <environment/ti/spi.h>
/* Platform type */
#define CONFIG_SOC_K2G
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
DEFAULT_FIT_TI_ARGS \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"rd_spec=-\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"findfdt="\
"if test $board_name = 66AK2GGP; then " \
"setenv name_fdt keystone-k2g-evm.dtb; " \
"else if test $board_name = 66AK2GG1; then " \
"setenv name_fdt keystone-k2g-evm.dtb; " \
"else if test $board_name = 66AK2GIC; then " \
"setenv name_fdt keystone-k2g-ice.dtb; " \
"else if test $name_fdt = undefined; then " \
"echo WARNING: Could not determine device tree to use;"\
"fi;fi;fi;fi; setenv fdtfile ${name_fdt}\0" \
"name_mon=skern-k2g.bin\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"init_mmc=run args_all args_mmc\0" \
"init_fw_rd_mmc=load mmc ${bootpart} ${rdaddr} " \
"${bootdir}/${name_fw_rd}; run set_rd_spec\0" \
"soc_variant=k2g\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
#ifndef CONFIG_TI_SECURE_DEVICE
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run init_${boot}; " \
"run get_mon_${boot} run_mon; " \
"run set_name_pmmc get_pmmc_${boot} run_pmmc; " \
"run get_kern_${boot}; " \
"run init_fw_rd_${boot}; " \
"run get_fdt_${boot}; " \
"run run_kern"
#else
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
"run envboot; " \
"run run_mon_hs; " \
"run init_${boot}; " \
"run get_fit_${boot}; " \
"bootm ${addr_fit}#${name_fdt}"
#endif
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 2
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CQSPI_REF_CLK 384000000
#endif
#define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS
#include <configs/ti_armv7_keystone2.h>
#endif /* __CONFIG_K2G_EVM_H */