mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-11 21:53:29 +08:00
Code Issues Packages Projects Releases Wiki Activity
a3058c08d9
u-boot/drivers/usb/host/dwc2.c
Oleksandr Tymoshenko 6e9e06260d usb: dwc2: Add driver for Synopsis DWC2 USB IP block 
This is the USB host controller used on the Altera SoCFPGA and Raspbery Pi.

This code has three checkpatch warnings, but to make sure it stays at least
readable and clear, these are not fixed. These bugs are in the USB request
handling combinatorial logic, so any abstracting of those is out of question.

Tested on DENX MCV (Altera SoCFPGA 5CSFXC6C6U23C8N) and RPi B+ (BCM2835).

Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: Vince Bridgers <vbridger@altera.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-10-22 22:01:58 +02:00

1054 lines
27 KiB
C
Raw Blame History

/*
* Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <usb.h>
#include <malloc.h>
#include <usbroothubdes.h>
#include <asm/io.h>
#include "dwc2.h"
/* Use only HC channel 0. */
#define DWC2_HC_CHANNEL 0
#define DWC2_STATUS_BUF_SIZE 64
#define DWC2_DATA_BUF_SIZE (64 * 1024)
/* We need doubleword-aligned buffers for DMA transfers */
DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer, DWC2_DATA_BUF_SIZE, 8);
DEFINE_ALIGN_BUFFER(uint8_t, status_buffer, DWC2_STATUS_BUF_SIZE, 8);
#define MAX_DEVICE 16
#define MAX_ENDPOINT 16
static int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
static int control_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
static int root_hub_devnum;
static struct dwc2_core_regs *regs =
(struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR;
/*
* DWC2 IP interface
*/
static int wait_for_bit(void *reg, const uint32_t mask, bool set)
{
unsigned int timeout = 1000000;
uint32_t val;
while (--timeout) {
val = readl(reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
udelay(1);
}
debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
__func__, reg, mask, set);
return -ETIMEDOUT;
}
/*
* Initializes the FSLSPClkSel field of the HCFG register
* depending on the PHY type.
*/
static void init_fslspclksel(struct dwc2_core_regs *regs)
{
uint32_t phyclk;
#if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
#else
/* High speed PHY running at full speed or high speed */
phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
#endif
#ifdef CONFIG_DWC2_ULPI_FS_LS
uint32_t hwcfg2 = readl(&regs->ghwcfg2);
uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
if (hval == 2 && fval == 1)
phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
#endif
clrsetbits_le32(&regs->host_regs.hcfg,
DWC2_HCFG_FSLSPCLKSEL_MASK,
phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
}
/*
* Flush a Tx FIFO.
*
* @param regs Programming view of DWC_otg controller.
* @param num Tx FIFO to flush.
*/
static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
{
int ret;
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
&regs->grstctl);
ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Wait for 3 PHY Clocks */
udelay(1);
}
/*
* Flush Rx FIFO.
*
* @param regs Programming view of DWC_otg controller.
*/
static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
{
int ret;
writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Wait for 3 PHY Clocks */
udelay(1);
}
/*
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
*/
static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
{
int ret;
/* Wait for AHB master IDLE state. */
ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Core Soft Reset */
writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/*
* Wait for core to come out of reset.
* NOTE: This long sleep is _very_ important, otherwise the core will
* not stay in host mode after a connector ID change!
*/
mdelay(100);
}
/*
* This function initializes the DWC_otg controller registers for
* host mode.
*
* This function flushes the Tx and Rx FIFOs and it flushes any entries in the
* request queues. Host channels are reset to ensure that they are ready for
* performing transfers.
*
* @param regs Programming view of DWC_otg controller
*
*/
static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
{
uint32_t nptxfifosize = 0;
uint32_t ptxfifosize = 0;
uint32_t hprt0 = 0;
int i, ret, num_channels;
/* Restart the Phy Clock */
writel(0, &regs->pcgcctl);
/* Initialize Host Configuration Register */
init_fslspclksel(regs);
#ifdef CONFIG_DWC2_DFLT_SPEED_FULL
setbits_le32(&regs->host_regs.hcfg, DWC2_HCFG_FSLSSUPP);
#endif
/* Configure data FIFO sizes */
#ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
if (readl(&regs->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) {
/* Rx FIFO */
writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, &regs->grxfsiz);
/* Non-periodic Tx FIFO */
nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
DWC2_FIFOSIZE_DEPTH_OFFSET;
nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
DWC2_FIFOSIZE_STARTADDR_OFFSET;
writel(nptxfifosize, &regs->gnptxfsiz);
/* Periodic Tx FIFO */
ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
DWC2_FIFOSIZE_DEPTH_OFFSET;
ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
DWC2_FIFOSIZE_STARTADDR_OFFSET;
writel(ptxfifosize, &regs->hptxfsiz);
}
#endif
/* Clear Host Set HNP Enable in the OTG Control Register */
clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
/* Make sure the FIFOs are flushed. */
dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */
dwc_otg_flush_rx_fifo(regs);
/* Flush out any leftover queued requests. */
num_channels = readl(&regs->ghwcfg2);
num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
num_channels += 1;
for (i = 0; i < num_channels; i++)
clrsetbits_le32(&regs->hc_regs[i].hcchar,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHDIS);
/* Halt all channels to put them into a known state. */
for (i = 0; i < num_channels; i++) {
clrsetbits_le32(&regs->hc_regs[i].hcchar,
DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
ret = wait_for_bit(&regs->hc_regs[i].hcchar,
DWC2_HCCHAR_CHEN, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
}
/* Turn on the vbus power. */
if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST) {
hprt0 = readl(&regs->hprt0);
hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
if (!(hprt0 & DWC2_HPRT0_PRTPWR)) {
hprt0 |= DWC2_HPRT0_PRTPWR;
writel(hprt0, &regs->hprt0);
}
}
}
/*
* This function initializes the DWC_otg controller registers and
* prepares the core for device mode or host mode operation.
*
* @param regs Programming view of the DWC_otg controller
*/
static void dwc_otg_core_init(struct dwc2_core_regs *regs)
{
uint32_t ahbcfg = 0;
uint32_t usbcfg = 0;
uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
/* Common Initialization */
usbcfg = readl(&regs->gusbcfg);
/* Program the ULPI External VBUS bit if needed */
#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
#else
usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
#endif
/* Set external TS Dline pulsing */
#ifdef CONFIG_DWC2_TS_DLINE
usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
#else
usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
#endif
writel(usbcfg, &regs->gusbcfg);
/* Reset the Controller */
dwc_otg_core_reset(regs);
/*
* This programming sequence needs to happen in FS mode before
* any other programming occurs
*/
#if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \
(CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
/* If FS mode with FS PHY */
setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
/* Reset after a PHY select */
dwc_otg_core_reset(regs);
/*
* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
* Also do this on HNP Dev/Host mode switches (done in dev_init
* and host_init).
*/
if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
init_fslspclksel(regs);
#ifdef CONFIG_DWC2_I2C_ENABLE
/* Program GUSBCFG.OtgUtmifsSel to I2C */
setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
/* Program GI2CCTL.I2CEn */
clrsetbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN |
DWC2_GI2CCTL_I2CDEVADDR_MASK,
1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET);
setbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN);
#endif
#else
/* High speed PHY. */
/*
* HS PHY parameters. These parameters are preserved during
* soft reset so only program the first time. Do a soft reset
* immediately after setting phyif.
*/
usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */
#ifdef CONFIG_DWC2_PHY_ULPI_DDR
usbcfg |= DWC2_GUSBCFG_DDRSEL;
#else
usbcfg &= ~DWC2_GUSBCFG_DDRSEL;
#endif
} else { /* UTMI+ interface */
#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16)
usbcfg |= DWC2_GUSBCFG_PHYIF;
#endif
}
writel(usbcfg, &regs->gusbcfg);
/* Reset after setting the PHY parameters */
dwc_otg_core_reset(regs);
#endif
usbcfg = readl(&regs->gusbcfg);
usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
#ifdef CONFIG_DWC2_ULPI_FS_LS
uint32_t hwcfg2 = readl(&regs->ghwcfg2);
uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
if (hval == 2 && fval == 1) {
usbcfg |= DWC2_GUSBCFG_ULPI_FSLS;
usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
}
#endif
writel(usbcfg, &regs->gusbcfg);
/* Program the GAHBCFG Register. */
switch (readl(&regs->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) {
case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY:
break;
case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA:
while (brst_sz > 1) {
ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET);
ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK;
brst_sz >>= 1;
}
#ifdef CONFIG_DWC2_DMA_ENABLE
ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
#endif
break;
case DWC2_HWCFG2_ARCHITECTURE_INT_DMA:
ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
#ifdef CONFIG_DWC2_DMA_ENABLE
ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
#endif
break;
}
writel(ahbcfg, &regs->gahbcfg);
/* Program the GUSBCFG register for HNP/SRP. */
setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP);
#ifdef CONFIG_DWC2_IC_USB_CAP
setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP);
#endif
}
/*
* Prepares a host channel for transferring packets to/from a specific
* endpoint. The HCCHARn register is set up with the characteristics specified
* in _hc. Host channel interrupts that may need to be serviced while this
* transfer is in progress are enabled.
*
* @param regs Programming view of DWC_otg controller
* @param hc Information needed to initialize the host channel
*/
static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in,
uint8_t ep_type, uint16_t max_packet)
{
struct dwc2_hc_regs *hc_regs = &regs->hc_regs[hc_num];
const uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
(ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
(ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
(ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
(max_packet << DWC2_HCCHAR_MPS_OFFSET);
/* Clear old interrupt conditions for this host channel. */
writel(0x3fff, &hc_regs->hcint);
/*
* Program the HCCHARn register with the endpoint characteristics
* for the current transfer.
*/
writel(hcchar, &hc_regs->hcchar);
/* Program the HCSPLIT register for SPLITs */
writel(0, &hc_regs->hcsplt);
}
/*
* DWC2 to USB API interface
*/
/* Direction: In ; Request: Status */
static int dwc_otg_submit_rh_msg_in_status(struct usb_device *dev, void *buffer,
int txlen, struct devrequest *cmd)
{
uint32_t hprt0 = 0;
uint32_t port_status = 0;
uint32_t port_change = 0;
int len = 0;
int stat = 0;
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
*(uint16_t *)buffer = cpu_to_le16(1);
len = 2;
break;
case USB_RECIP_INTERFACE:
case USB_RECIP_ENDPOINT:
*(uint16_t *)buffer = cpu_to_le16(0);
len = 2;
break;
case USB_TYPE_CLASS:
*(uint32_t *)buffer = cpu_to_le32(0);
len = 4;
break;
case USB_RECIP_OTHER | USB_TYPE_CLASS:
hprt0 = readl(&regs->hprt0);
if (hprt0 & DWC2_HPRT0_PRTCONNSTS)
port_status |= USB_PORT_STAT_CONNECTION;
if (hprt0 & DWC2_HPRT0_PRTENA)
port_status |= USB_PORT_STAT_ENABLE;
if (hprt0 & DWC2_HPRT0_PRTSUSP)
port_status |= USB_PORT_STAT_SUSPEND;
if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT)
port_status |= USB_PORT_STAT_OVERCURRENT;
if (hprt0 & DWC2_HPRT0_PRTRST)
port_status |= USB_PORT_STAT_RESET;
if (hprt0 & DWC2_HPRT0_PRTPWR)
port_status |= USB_PORT_STAT_POWER;
port_status |= USB_PORT_STAT_HIGH_SPEED;
if (hprt0 & DWC2_HPRT0_PRTENCHNG)
port_change |= USB_PORT_STAT_C_ENABLE;
if (hprt0 & DWC2_HPRT0_PRTCONNDET)
port_change |= USB_PORT_STAT_C_CONNECTION;
if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG)
port_change |= USB_PORT_STAT_C_OVERCURRENT;
*(uint32_t *)buffer = cpu_to_le32(port_status |
(port_change << 16));
len = 4;
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In ; Request: Descriptor */
static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
unsigned char data[32];
uint32_t dsc;
int len = 0;
int stat = 0;
uint16_t wValue = cpu_to_le16(cmd->value);
uint16_t wLength = cpu_to_le16(cmd->length);
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
switch (wValue & 0xff00) {
case 0x0100: /* device descriptor */
len = min3(txlen, sizeof(root_hub_dev_des), wLength);
memcpy(buffer, root_hub_dev_des, len);
break;
case 0x0200: /* configuration descriptor */
len = min3(txlen, sizeof(root_hub_config_des), wLength);
memcpy(buffer, root_hub_config_des, len);
break;
case 0x0300: /* string descriptors */
switch (wValue & 0xff) {
case 0x00:
len = min3(txlen, sizeof(root_hub_str_index0),
wLength);
memcpy(buffer, root_hub_str_index0, len);
break;
case 0x01:
len = min3(txlen, sizeof(root_hub_str_index1),
wLength);
memcpy(buffer, root_hub_str_index1, len);
break;
}
break;
default:
stat = USB_ST_STALLED;
}
break;
case USB_TYPE_CLASS:
/* Root port config, set 1 port and nothing else. */
dsc = 0x00000001;
data[0] = 9; /* min length; */
data[1] = 0x29;
data[2] = dsc & RH_A_NDP;
data[3] = 0;
if (dsc & RH_A_PSM)
data[3] |= 0x1;
if (dsc & RH_A_NOCP)
data[3] |= 0x10;
else if (dsc & RH_A_OCPM)
data[3] |= 0x8;
/* corresponds to data[4-7] */
data[5] = (dsc & RH_A_POTPGT) >> 24;
data[7] = dsc & RH_B_DR;
if (data[2] < 7) {
data[8] = 0xff;
} else {
data[0] += 2;
data[8] = (dsc & RH_B_DR) >> 8;
data[9] = 0xff;
data[10] = data[9];
}
len = min3(txlen, data[0], wLength);
memcpy(buffer, data, len);
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In ; Request: Configuration */
static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
int len = 0;
int stat = 0;
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
*(uint8_t *)buffer = 0x01;
len = 1;
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In */
static int dwc_otg_submit_rh_msg_in(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
switch (cmd->request) {
case USB_REQ_GET_STATUS:
return dwc_otg_submit_rh_msg_in_status(dev, buffer,
txlen, cmd);
case USB_REQ_GET_DESCRIPTOR:
return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer,
txlen, cmd);
case USB_REQ_GET_CONFIGURATION:
return dwc_otg_submit_rh_msg_in_configuration(dev, buffer,
txlen, cmd);
default:
puts("unsupported root hub command\n");
return USB_ST_STALLED;
}
}
/* Direction: Out */
static int dwc_otg_submit_rh_msg_out(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
int len = 0;
int stat = 0;
uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8);
uint16_t wValue = cpu_to_le16(cmd->value);
switch (bmrtype_breq & ~USB_DIR_IN) {
case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT:
case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS:
break;
case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
switch (wValue) {
case USB_PORT_FEAT_C_CONNECTION:
setbits_le32(&regs->hprt0, DWC2_HPRT0_PRTCONNDET);
break;
}
break;
case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
break;
case USB_PORT_FEAT_RESET:
clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
mdelay(50);
clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTRST);
break;
case USB_PORT_FEAT_POWER:
clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
break;
case USB_PORT_FEAT_ENABLE:
break;
}
break;
case (USB_REQ_SET_ADDRESS << 8):
root_hub_devnum = wValue;
break;
case (USB_REQ_SET_CONFIGURATION << 8):
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
len = min(len, txlen);
dev->act_len = len;
dev->status = stat;
return stat;
}
static int dwc_otg_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int txlen,
struct devrequest *cmd)
{
int stat = 0;
if (usb_pipeint(pipe)) {
puts("Root-Hub submit IRQ: NOT implemented\n");
return 0;
}
if (cmd->requesttype & USB_DIR_IN)
stat = dwc_otg_submit_rh_msg_in(dev, buffer, txlen, cmd);
else
stat = dwc_otg_submit_rh_msg_out(dev, buffer, txlen, cmd);
mdelay(1);
return stat;
}
/* U-Boot USB transmission interface */
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len)
{
int devnum = usb_pipedevice(pipe);
int ep = usb_pipeendpoint(pipe);
int max = usb_maxpacket(dev, pipe);
int done = 0;
uint32_t hctsiz, sub, tmp;
struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
uint32_t hcint;
uint32_t xfer_len;
uint32_t num_packets;
int stop_transfer = 0;
unsigned int timeout = 1000000;
if (devnum == root_hub_devnum) {
dev->status = 0;
return -EINVAL;
}
if (len > DWC2_DATA_BUF_SIZE) {
printf("%s: %d is more then available buffer size (%d)\n",
__func__, len, DWC2_DATA_BUF_SIZE);
dev->status = 0;
dev->act_len = 0;
return -EINVAL;
}
while ((done < len) && !stop_transfer) {
/* Initialize channel */
dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
usb_pipein(pipe), DWC2_HCCHAR_EPTYPE_BULK, max);
xfer_len = len - done;
/* Make sure that xfer_len is a multiple of max packet size. */
if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)
xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1;
if (xfer_len > 0) {
num_packets = (xfer_len + max - 1) / max;
if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) {
num_packets = CONFIG_DWC2_MAX_PACKET_COUNT;
xfer_len = num_packets * max;
}
} else {
num_packets = 1;
}
if (usb_pipein(pipe))
xfer_len = num_packets * max;
writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
(num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
(bulk_data_toggle[devnum][ep] <<
DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
memcpy(aligned_buffer, (char *)buffer + done, len - done);
writel((uint32_t)aligned_buffer, &hc_regs->hcdma);
/* Set host channel enable after all other setup is complete. */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
(1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
DWC2_HCCHAR_CHEN);
while (1) {
hcint = readl(&hc_regs->hcint);
if (!(hcint & DWC2_HCINT_CHHLTD))
continue;
if (hcint & DWC2_HCINT_XFERCOMP) {
hctsiz = readl(&hc_regs->hctsiz);
done += xfer_len;
sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK;
sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET;
if (usb_pipein(pipe)) {
done -= sub;
if (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK)
stop_transfer = 1;
}
tmp = hctsiz & DWC2_HCTSIZ_PID_MASK;
tmp >>= DWC2_HCTSIZ_PID_OFFSET;
if (tmp == DWC2_HC_PID_DATA1) {
bulk_data_toggle[devnum][ep] =
DWC2_HC_PID_DATA1;
} else {
bulk_data_toggle[devnum][ep] =
DWC2_HC_PID_DATA0;
}
break;
}
if (hcint & DWC2_HCINT_STALL) {
puts("DWC OTG: Channel halted\n");
bulk_data_toggle[devnum][ep] =
DWC2_HC_PID_DATA0;
stop_transfer = 1;
break;
}
if (!--timeout) {
printf("%s: Timeout!\n", __func__);
break;
}
}
}
if (done && usb_pipein(pipe))
memcpy(buffer, aligned_buffer, done);
writel(0, &hc_regs->hcintmsk);
writel(0xFFFFFFFF, &hc_regs->hcint);
dev->status = 0;
dev->act_len = done;
return 0;
}
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len, struct devrequest *setup)
{
struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
int done = 0;
int devnum = usb_pipedevice(pipe);
int ep = usb_pipeendpoint(pipe);
int max = usb_maxpacket(dev, pipe);
uint32_t hctsiz = 0, sub, tmp, ret;
uint32_t hcint;
const uint32_t hcint_comp_hlt_ack = DWC2_HCINT_XFERCOMP |
DWC2_HCINT_CHHLTD | DWC2_HCINT_ACK;
unsigned int timeout = 1000000;
/* For CONTROL endpoint pid should start with DATA1 */
int status_direction;
if (devnum == root_hub_devnum) {
dev->status = 0;
dev->speed = USB_SPEED_HIGH;
return dwc_otg_submit_rh_msg(dev, pipe, buffer, len, setup);
}
if (len > DWC2_DATA_BUF_SIZE) {
printf("%s: %d is more then available buffer size(%d)\n",
__func__, len, DWC2_DATA_BUF_SIZE);
dev->status = 0;
dev->act_len = 0;
return -EINVAL;
}
/* Initialize channel, OUT for setup buffer */
dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 0,
DWC2_HCCHAR_EPTYPE_CONTROL, max);
/* SETUP stage */
writel((8 << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
(1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
(DWC2_HC_PID_SETUP << DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
writel((uint32_t)setup, &hc_regs->hcdma);
/* Set host channel enable after all other setup is complete. */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
(1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN);
ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, 1);
if (ret)
printf("%s: Timeout!\n", __func__);
hcint = readl(&hc_regs->hcint);
if (!(hcint & DWC2_HCINT_CHHLTD) || !(hcint & DWC2_HCINT_XFERCOMP)) {
printf("%s: Error (HCINT=%08x)\n", __func__, hcint);
dev->status = 0;
dev->act_len = 0;
return -EINVAL;
}
/* Clear interrupts */
writel(0, &hc_regs->hcintmsk);
writel(0xFFFFFFFF, &hc_regs->hcint);
if (buffer) {
/* DATA stage */
dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
usb_pipein(pipe),
DWC2_HCCHAR_EPTYPE_CONTROL, max);
/* TODO: check if len < 64 */
control_data_toggle[devnum][ep] = DWC2_HC_PID_DATA1;
writel((len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
(1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
(control_data_toggle[devnum][ep] <<
DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
writel((uint32_t)buffer, &hc_regs->hcdma);
/* Set host channel enable after all other setup is complete */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
(1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
DWC2_HCCHAR_CHEN);
while (1) {
hcint = readl(&hc_regs->hcint);
if (!(hcint & DWC2_HCINT_CHHLTD))
continue;
if (hcint & DWC2_HCINT_XFERCOMP) {
hctsiz = readl(&hc_regs->hctsiz);
done = len;
sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK;
sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET;
if (usb_pipein(pipe))
done -= sub;
}
if (hcint & DWC2_HCINT_ACK) {
tmp = hctsiz & DWC2_HCTSIZ_PID_MASK;
tmp >>= DWC2_HCTSIZ_PID_OFFSET;
if (tmp == DWC2_HC_PID_DATA0) {
control_data_toggle[devnum][ep] =
DWC2_HC_PID_DATA0;
} else {
control_data_toggle[devnum][ep] =
DWC2_HC_PID_DATA1;
}
}
if (hcint != hcint_comp_hlt_ack) {
printf("%s: Error (HCINT=%08x)\n",
__func__, hcint);
goto out;
}
if (!--timeout) {
printf("%s: Timeout!\n", __func__);
goto out;
}
break;
}
} /* End of DATA stage */
/* STATUS stage */
if ((len == 0) || usb_pipeout(pipe))
status_direction = 1;
else
status_direction = 0;
dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
status_direction, DWC2_HCCHAR_EPTYPE_CONTROL, max);
writel((1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
(DWC2_HC_PID_DATA1 << DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
writel((uint32_t)status_buffer, &hc_regs->hcdma);
/* Set host channel enable after all other setup is complete. */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
(1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN);
while (1) {
hcint = readl(&hc_regs->hcint);
if (hcint & DWC2_HCINT_CHHLTD)
break;
}
if (hcint != hcint_comp_hlt_ack)
printf("%s: Error (HCINT=%08x)\n", __func__, hcint);
out:
dev->act_len = done;
dev->status = 0;
return done;
}
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len, int interval)
{
printf("dev = %p pipe = %#lx buf = %p size = %d int = %d\n",
dev, pipe, buffer, len, interval);
return -ENOSYS;
}
/* U-Boot USB control interface */
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
uint32_t snpsid;
int i, j;
root_hub_devnum = 0;
snpsid = readl(&regs->gsnpsid);
printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff);
if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx) {
printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid);
return -ENODEV;
}
dwc_otg_core_init(regs);
dwc_otg_core_host_init(regs);
clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
mdelay(50);
clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
DWC2_HPRT0_PRTRST);
for (i = 0; i < MAX_DEVICE; i++) {
for (j = 0; j < MAX_ENDPOINT; j++) {
control_data_toggle[i][j] = DWC2_HC_PID_DATA1;
bulk_data_toggle[i][j] = DWC2_HC_PID_DATA0;
}
}
return 0;
}
int usb_lowlevel_stop(int index)
{
/* Put everything in reset. */
clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink