mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-05 02:23:31 +08:00
a101361bfe
The U-boot DM9000x driver contains a compile time bus-width definition for the databus connected to the network controller. This compile check makes the code unclear, inflexible and is unneccessary. It can be asked to the network controller what its bus-width is by reading bits 6 and 7 of the interrupt status register. The linux kernel already uses a runtime mechanism to determine this bus-width, so the implementation below looks somewhat like that implementation. This change has been tested with DM9000A, DM9000E, DM9000EP. Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
322 lines
9.2 KiB
C
322 lines
9.2 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Stefano Babic, DENX Gmbh, sbabic@denx.de
|
|
*
|
|
* (C) Copyright 2004
|
|
* Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* Configuation settings for the LUBBOCK board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
|
|
|
|
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
|
|
|
|
#define CONFIG_MMC 1
|
|
#define BOARD_LATE_INIT 1
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define RTC
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL_MULTI
|
|
#define CONFIG_FFUART 1 /* we use FFUART on Conxs */
|
|
#define CONFIG_BTUART 1 /* we use BTUART on Conxs */
|
|
#define CONFIG_STUART 1 /* we use STUART on Conxs */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 38400
|
|
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_IMLS
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_USB
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
|
|
#undef CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_SERVERIP 192.168.1.99
|
|
#define CONFIG_BOOTCOMMAND "run boot_flash"
|
|
#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\
|
|
" rw root=/dev/ram initrd=0xa0800000,5m"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"program_boot_mmc=" \
|
|
"mw.b 0xa0010000 0xff 0x20000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0010000 u-boot.bin; " \
|
|
"then " \
|
|
"protect off 0x0 0x1ffff; " \
|
|
"erase 0x0 0x1ffff; " \
|
|
"cp.b 0xa0010000 0x0 0x20000; " \
|
|
"fi\0" \
|
|
"program_uzImage_mmc=" \
|
|
"mw.b 0xa0010000 0xff 0x180000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0010000 uzImage; " \
|
|
"then " \
|
|
"protect off 0x40000 0x1bffff; " \
|
|
"erase 0x40000 0x1bffff; " \
|
|
"cp.b 0xa0010000 0x40000 0x180000; " \
|
|
"fi\0" \
|
|
"program_ramdisk_mmc=" \
|
|
"mw.b 0xa0010000 0xff 0x500000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0010000 ramdisk.gz; " \
|
|
"then " \
|
|
"protect off 0x1c0000 0x6bffff; " \
|
|
"erase 0x1c0000 0x6bffff; " \
|
|
"cp.b 0xa0010000 0x1c0000 0x500000; " \
|
|
"fi\0" \
|
|
"boot_mmc=" \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0030000 uzImage && " \
|
|
"fatload mmc 0 0xa0800000 ramdisk.gz; " \
|
|
"then " \
|
|
"bootm 0xa0030000; " \
|
|
"fi\0" \
|
|
"boot_flash=" \
|
|
"cp.b 0x1c0000 0xa0800000 0x500000; " \
|
|
"bootm 0x40000\0" \
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
/* #define CONFIG_INITRD_TAG 1 */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_HUSH_PARSER 1
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT "$ " /* Monitor Command Prompt */
|
|
#else
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#endif
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_DEVICE_NULLDEV 1
|
|
|
|
#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0xa1000000 /* default load address */
|
|
|
|
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
|
|
#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CFG_MMC_BASE 0xF0000000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
|
|
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
|
|
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
|
|
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
|
|
#define CFG_DRAM_BASE 0xa0000000
|
|
#define CFG_DRAM_SIZE 0x04000000
|
|
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*
|
|
* GPIO settings
|
|
*/
|
|
#define CFG_GPSR0_VAL 0x00018000
|
|
#define CFG_GPSR1_VAL 0x00000000
|
|
#define CFG_GPSR2_VAL 0x400dc000
|
|
#define CFG_GPSR3_VAL 0x00000000
|
|
#define CFG_GPCR0_VAL 0x00000000
|
|
#define CFG_GPCR1_VAL 0x00000000
|
|
#define CFG_GPCR2_VAL 0x00000000
|
|
#define CFG_GPCR3_VAL 0x00000000
|
|
#define CFG_GPDR0_VAL 0x00018000
|
|
#define CFG_GPDR1_VAL 0x00028801
|
|
#define CFG_GPDR2_VAL 0x520dc000
|
|
#define CFG_GPDR3_VAL 0x0001E000
|
|
#define CFG_GAFR0_L_VAL 0x801c0000
|
|
#define CFG_GAFR0_U_VAL 0x00000013
|
|
#define CFG_GAFR1_L_VAL 0x6990100A
|
|
#define CFG_GAFR1_U_VAL 0x00000008
|
|
#define CFG_GAFR2_L_VAL 0xA0000000
|
|
#define CFG_GAFR2_U_VAL 0x010900F2
|
|
#define CFG_GAFR3_L_VAL 0x54000003
|
|
#define CFG_GAFR3_U_VAL 0x00002401
|
|
#define CFG_GRER0_VAL 0x00000000
|
|
#define CFG_GRER1_VAL 0x00000000
|
|
#define CFG_GRER2_VAL 0x00000000
|
|
#define CFG_GRER3_VAL 0x00000000
|
|
#define CFG_GFER0_VAL 0x00000000
|
|
#define CFG_GFER1_VAL 0x00000000
|
|
#define CFG_GFER2_VAL 0x00000000
|
|
#define CFG_GFER3_VAL 0x00000020
|
|
|
|
|
|
#define CFG_PSSR_VAL 0x20 /* CHECK */
|
|
|
|
/*
|
|
* Clock settings
|
|
*/
|
|
#define CFG_CKEN 0x01FFFFFF /* CHECK */
|
|
#define CFG_CCCR 0x02000290 /* 520Mhz */
|
|
|
|
/*
|
|
* Memory settings
|
|
*/
|
|
|
|
#define CFG_MSC0_VAL 0x4df84df0
|
|
#define CFG_MSC1_VAL 0x7ff87ff4
|
|
#define CFG_MSC2_VAL 0xa26936d4
|
|
#define CFG_MDCNFG_VAL 0x880009C9
|
|
#define CFG_MDREFR_VAL 0x20ca201e
|
|
#define CFG_MDMRS_VAL 0x00220022
|
|
|
|
#define CFG_FLYCNFG_VAL 0x00000000
|
|
#define CFG_SXCNFG_VAL 0x40044004
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CFG_MECR_VAL 0x00000001
|
|
#define CFG_MCMEM0_VAL 0x00004204
|
|
#define CFG_MCMEM1_VAL 0x00010204
|
|
#define CFG_MCATT0_VAL 0x00010504
|
|
#define CFG_MCATT1_VAL 0x00010504
|
|
#define CFG_MCIO0_VAL 0x00008407
|
|
#define CFG_MCIO1_VAL 0x0000c108
|
|
|
|
#define CONFIG_DRIVER_DM9000 1
|
|
#define CONFIG_DM9000_BASE 0x08000000
|
|
#define DM9000_IO CONFIG_DM9000_BASE
|
|
#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004)
|
|
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CFG_USB_OHCI_BOARD_INIT 1
|
|
#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
|
|
#define CFG_USB_OHCI_REGS_BASE 0x4C000000
|
|
#define CFG_USB_OHCI_SLOT_NAME "trizepsiv"
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CFG_USB_OHCI_CPU_INIT 1
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
#define CFG_FLASH_CFI
|
|
#define CFG_FLASH_CFI_DRIVER 1
|
|
|
|
#define CFG_MONITOR_BASE 0
|
|
#define CFG_MONITOR_LEN 0x40000
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
/* write flash less slowly */
|
|
#define CFG_FLASH_USE_BUFFER_WRITE 1
|
|
|
|
/* Flash environment locations */
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */
|
|
#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
|
|
#endif /* __CONFIG_H */
|