mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-30 08:03:32 +08:00
466fff1a7b
This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
352 lines
11 KiB
C
352 lines
11 KiB
C
/*
|
|
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define BOOT_SMALL_FLASH 32 /* 00100000 */
|
|
#define FLASH_ONBD_N 2 /* 00000010 */
|
|
#define FLASH_SRAM_SEL 1 /* 00000001 */
|
|
|
|
long int fixed_sdram (void);
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
unsigned long sdrreg;
|
|
/* TBS: Setup the GPIO access for the user LEDs */
|
|
mfsdr(sdr_pfc0, sdrreg);
|
|
mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
|
|
out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
|
|
LED0_OFF();
|
|
LED1_OFF();
|
|
LED2_OFF();
|
|
LED3_OFF();
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the external bus controller/chip selects
|
|
*-------------------------------------------------------------------*/
|
|
|
|
/* set the bus controller */
|
|
mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */
|
|
mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
|
|
mtebc (pb1ap, 0x04055200); /* FLASH/SRAM */
|
|
mtebc (pb1cr, 0xfe098000); /* BAS=0xff8 16MB R/W 8-bit */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr (uic0sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic0er, 0x00000000); /* disable all */
|
|
mtdcr (uic0cr, 0x00000003); /* SMI & UIC1 crit are critical */
|
|
mtdcr (uic0pr, 0xfffffe00); /* per ref-board manual */
|
|
mtdcr (uic0tr, 0x01c00000); /* per ref-board manual */
|
|
mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic0sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic1er, 0x00000000); /* disable all */
|
|
mtdcr (uic1cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic1pr, 0xffffc0ff); /* per ref-board manual */
|
|
mtdcr (uic1tr, 0x00ff8000); /* per ref-board manual */
|
|
mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic2er, 0x00000000); /* disable all */
|
|
mtdcr (uic2cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
|
|
mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
|
|
mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uicb0sr, 0xfc000000); /* clear all */
|
|
mtdcr (uicb0er, 0x00000000); /* disable all */
|
|
mtdcr (uicb0cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uicb0pr, 0xfc000000); /* */
|
|
mtdcr (uicb0tr, 0x00000000); /* */
|
|
mtdcr (uicb0vr, 0x00000001); /* */
|
|
|
|
LED0_ON();
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
printf ("Board: XES XPedite1000 440GX\n");
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = spd_sdram ();
|
|
#else
|
|
dram_size = fixed_sdram ();
|
|
#endif
|
|
return dram_size;
|
|
}
|
|
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) 0x00000000;
|
|
uint *pend = (uint *) 0x08000000;
|
|
uint *p;
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
*
|
|
* Assumes: 128 MB, non-ECC, non-registered
|
|
* PLB @ 133 MHz
|
|
*
|
|
************************************************************************/
|
|
long int fixed_sdram (void)
|
|
{
|
|
uint reg;
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup some default
|
|
*------------------------------------------------------------------*/
|
|
mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
|
|
mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
|
|
mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
|
|
mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
|
|
mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup for board-specific specific mem
|
|
*------------------------------------------------------------------*/
|
|
/*
|
|
* Following for CAS Latency = 2.5 @ 133 MHz PLB
|
|
*/
|
|
mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
|
|
mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
|
|
/* RA=10 RD=3 */
|
|
mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
|
|
mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
|
|
mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
|
|
udelay (400); /* Delay 200 usecs (min) */
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Enable the controller, then wait for DCEN to complete
|
|
*------------------------------------------------------------------*/
|
|
mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
|
|
for (;;) {
|
|
mfsdram (mem_mcsts, reg);
|
|
if (reg & 0x80000000)
|
|
break;
|
|
}
|
|
|
|
return (128 * 1024 * 1024); /* 128 MB */
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
|
|
/*************************************************************************
|
|
* pci_pre_init
|
|
*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int pci_pre_init(struct pci_controller * hose )
|
|
{
|
|
unsigned long strap;
|
|
/* See if we're supposed to setup the pci */
|
|
mfsdr(sdr_sdstp1, strap);
|
|
if ((strap & 0x00010000) == 0) {
|
|
return (0);
|
|
}
|
|
|
|
#if defined(CFG_PCI_FORCE_PCI_CONV)
|
|
/* Setup System Device Register PCIX0_XCR */
|
|
mfsdr(sdr_xcr, strap);
|
|
strap &= 0x0f000000;
|
|
mtsdr(sdr_xcr, strap);
|
|
#endif
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
/*************************************************************************
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller * hose )
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
* Disable everything
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM1SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM2SA, 0 ); /* disable */
|
|
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
|
* options to not support sizes such as 128/256 MB.
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
|
|
out32r( PCIX0_PIM0LAH, 0 );
|
|
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
|
|
|
|
out32r( PCIX0_BAR0, 0 );
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Program the board's subsystem id/vendor id
|
|
*--------------------------------------------------------------------------*/
|
|
out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
|
|
out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
|
|
|
|
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
|
|
|
|
|
/*************************************************************************
|
|
* is_pci_host
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
return ((in32(CFG_GPIO_BASE + 0x1C) & 0x00000800) == 0);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
#ifdef CONFIG_POST
|
|
/*
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
* Called from board_init_f().
|
|
*/
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
|
|
return (ctrlc());
|
|
}
|
|
|
|
void post_word_store (ulong a)
|
|
{
|
|
volatile ulong *save_addr =
|
|
(volatile ulong *)(CFG_POST_WORD_ADDR);
|
|
|
|
*save_addr = a;
|
|
}
|
|
|
|
ulong post_word_load (void)
|
|
{
|
|
volatile ulong *save_addr =
|
|
(volatile ulong *)(CFG_POST_WORD_ADDR);
|
|
|
|
return *save_addr;
|
|
}
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM
|
|
*-----------------------------------------------------------------------------
|
|
*/
|
|
static int enetaddr_num = 0;
|
|
void board_get_enetaddr (uchar * enet)
|
|
{
|
|
int i;
|
|
unsigned char buff[0x100], *cp;
|
|
|
|
/* Initialize I2C */
|
|
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
|
|
|
/* Read 256 bytes in EEPROM */
|
|
i2c_read (0x50, 0, 1, buff, 0x100);
|
|
|
|
if (enetaddr_num == 0) {
|
|
cp = &buff[0xF4];
|
|
enetaddr_num = 1;
|
|
}
|
|
else
|
|
cp = &buff[0xFA];
|
|
|
|
for (i = 0; i < 6; i++,cp++)
|
|
enet[i] = *cp;
|
|
|
|
printf ("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
enet[0], enet[1], enet[2], enet[3], enet[4], enet[5]);
|
|
|
|
}
|