mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-21 02:33:27 +08:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
316 lines
8.3 KiB
C
316 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/libfdt.h>
|
|
#include <mmc.h>
|
|
#include <sdhci.h>
|
|
|
|
/* HRS - Host Register Set (specific to Cadence) */
|
|
#define SDHCI_CDNS_HRS04 0x10 /* PHY access port */
|
|
#define SDHCI_CDNS_HRS04_ACK BIT(26)
|
|
#define SDHCI_CDNS_HRS04_RD BIT(25)
|
|
#define SDHCI_CDNS_HRS04_WR BIT(24)
|
|
#define SDHCI_CDNS_HRS04_RDATA GENMASK(23, 16)
|
|
#define SDHCI_CDNS_HRS04_WDATA GENMASK(15, 8)
|
|
#define SDHCI_CDNS_HRS04_ADDR GENMASK(5, 0)
|
|
|
|
#define SDHCI_CDNS_HRS06 0x18 /* eMMC control */
|
|
#define SDHCI_CDNS_HRS06_TUNE_UP BIT(15)
|
|
#define SDHCI_CDNS_HRS06_TUNE GENMASK(13, 8)
|
|
#define SDHCI_CDNS_HRS06_MODE GENMASK(2, 0)
|
|
#define SDHCI_CDNS_HRS06_MODE_SD 0x0
|
|
#define SDHCI_CDNS_HRS06_MODE_MMC_SDR 0x2
|
|
#define SDHCI_CDNS_HRS06_MODE_MMC_DDR 0x3
|
|
#define SDHCI_CDNS_HRS06_MODE_MMC_HS200 0x4
|
|
#define SDHCI_CDNS_HRS06_MODE_MMC_HS400 0x5
|
|
#define SDHCI_CDNS_HRS06_MODE_MMC_HS400ES 0x6
|
|
|
|
/* SRS - Slot Register Set (SDHCI-compatible) */
|
|
#define SDHCI_CDNS_SRS_BASE 0x200
|
|
|
|
/* PHY */
|
|
#define SDHCI_CDNS_PHY_DLY_SD_HS 0x00
|
|
#define SDHCI_CDNS_PHY_DLY_SD_DEFAULT 0x01
|
|
#define SDHCI_CDNS_PHY_DLY_UHS_SDR12 0x02
|
|
#define SDHCI_CDNS_PHY_DLY_UHS_SDR25 0x03
|
|
#define SDHCI_CDNS_PHY_DLY_UHS_SDR50 0x04
|
|
#define SDHCI_CDNS_PHY_DLY_UHS_DDR50 0x05
|
|
#define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY 0x06
|
|
#define SDHCI_CDNS_PHY_DLY_EMMC_SDR 0x07
|
|
#define SDHCI_CDNS_PHY_DLY_EMMC_DDR 0x08
|
|
#define SDHCI_CDNS_PHY_DLY_SDCLK 0x0b
|
|
#define SDHCI_CDNS_PHY_DLY_HSMMC 0x0c
|
|
#define SDHCI_CDNS_PHY_DLY_STROBE 0x0d
|
|
|
|
/*
|
|
* The tuned val register is 6 bit-wide, but not the whole of the range is
|
|
* available. The range 0-42 seems to be available (then 43 wraps around to 0)
|
|
* but I am not quite sure if it is official. Use only 0 to 39 for safety.
|
|
*/
|
|
#define SDHCI_CDNS_MAX_TUNING_LOOP 40
|
|
|
|
struct sdhci_cdns_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
void __iomem *hrs_addr;
|
|
};
|
|
|
|
struct sdhci_cdns_phy_cfg {
|
|
const char *property;
|
|
u8 addr;
|
|
};
|
|
|
|
static const struct sdhci_cdns_phy_cfg sdhci_cdns_phy_cfgs[] = {
|
|
{ "cdns,phy-input-delay-sd-highspeed", SDHCI_CDNS_PHY_DLY_SD_HS, },
|
|
{ "cdns,phy-input-delay-legacy", SDHCI_CDNS_PHY_DLY_SD_DEFAULT, },
|
|
{ "cdns,phy-input-delay-sd-uhs-sdr12", SDHCI_CDNS_PHY_DLY_UHS_SDR12, },
|
|
{ "cdns,phy-input-delay-sd-uhs-sdr25", SDHCI_CDNS_PHY_DLY_UHS_SDR25, },
|
|
{ "cdns,phy-input-delay-sd-uhs-sdr50", SDHCI_CDNS_PHY_DLY_UHS_SDR50, },
|
|
{ "cdns,phy-input-delay-sd-uhs-ddr50", SDHCI_CDNS_PHY_DLY_UHS_DDR50, },
|
|
{ "cdns,phy-input-delay-mmc-highspeed", SDHCI_CDNS_PHY_DLY_EMMC_SDR, },
|
|
{ "cdns,phy-input-delay-mmc-ddr", SDHCI_CDNS_PHY_DLY_EMMC_DDR, },
|
|
{ "cdns,phy-dll-delay-sdclk", SDHCI_CDNS_PHY_DLY_SDCLK, },
|
|
{ "cdns,phy-dll-delay-sdclk-hsmmc", SDHCI_CDNS_PHY_DLY_HSMMC, },
|
|
{ "cdns,phy-dll-delay-strobe", SDHCI_CDNS_PHY_DLY_STROBE, },
|
|
};
|
|
|
|
static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_plat *plat,
|
|
u8 addr, u8 data)
|
|
{
|
|
void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS04;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
tmp = FIELD_PREP(SDHCI_CDNS_HRS04_WDATA, data) |
|
|
FIELD_PREP(SDHCI_CDNS_HRS04_ADDR, addr);
|
|
writel(tmp, reg);
|
|
|
|
tmp |= SDHCI_CDNS_HRS04_WR;
|
|
writel(tmp, reg);
|
|
|
|
ret = readl_poll_timeout(reg, tmp, tmp & SDHCI_CDNS_HRS04_ACK, 10);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp &= ~SDHCI_CDNS_HRS04_WR;
|
|
writel(tmp, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_cdns_phy_init(struct sdhci_cdns_plat *plat,
|
|
const void *fdt, int nodeoffset)
|
|
{
|
|
const fdt32_t *prop;
|
|
int ret, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sdhci_cdns_phy_cfgs); i++) {
|
|
prop = fdt_getprop(fdt, nodeoffset,
|
|
sdhci_cdns_phy_cfgs[i].property, NULL);
|
|
if (!prop)
|
|
continue;
|
|
|
|
ret = sdhci_cdns_write_phy_reg(plat,
|
|
sdhci_cdns_phy_cfgs[i].addr,
|
|
fdt32_to_cpu(*prop));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_cdns_set_control_reg(struct sdhci_host *host)
|
|
{
|
|
struct mmc *mmc = host->mmc;
|
|
struct sdhci_cdns_plat *plat = dev_get_plat(mmc->dev);
|
|
unsigned int clock = mmc->clock;
|
|
u32 mode, tmp;
|
|
|
|
/*
|
|
* REVISIT:
|
|
* The mode should be decided by MMC_TIMING_* like Linux, but
|
|
* U-Boot does not support timing. Use the clock frequency instead.
|
|
*/
|
|
if (clock <= 26000000) {
|
|
mode = SDHCI_CDNS_HRS06_MODE_SD; /* use this for Legacy */
|
|
} else if (clock <= 52000000) {
|
|
if (mmc->ddr_mode)
|
|
mode = SDHCI_CDNS_HRS06_MODE_MMC_DDR;
|
|
else
|
|
mode = SDHCI_CDNS_HRS06_MODE_MMC_SDR;
|
|
} else {
|
|
if (mmc->ddr_mode)
|
|
mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400;
|
|
else
|
|
mode = SDHCI_CDNS_HRS06_MODE_MMC_HS200;
|
|
}
|
|
|
|
tmp = readl(plat->hrs_addr + SDHCI_CDNS_HRS06);
|
|
tmp &= ~SDHCI_CDNS_HRS06_MODE;
|
|
tmp |= FIELD_PREP(SDHCI_CDNS_HRS06_MODE, mode);
|
|
writel(tmp, plat->hrs_addr + SDHCI_CDNS_HRS06);
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_cdns_ops = {
|
|
.set_control_reg = sdhci_cdns_set_control_reg,
|
|
};
|
|
|
|
static int sdhci_cdns_set_tune_val(struct sdhci_cdns_plat *plat,
|
|
unsigned int val)
|
|
{
|
|
void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS06;
|
|
u32 tmp;
|
|
int i, ret;
|
|
|
|
if (WARN_ON(!FIELD_FIT(SDHCI_CDNS_HRS06_TUNE, val)))
|
|
return -EINVAL;
|
|
|
|
tmp = readl(reg);
|
|
tmp &= ~SDHCI_CDNS_HRS06_TUNE;
|
|
tmp |= FIELD_PREP(SDHCI_CDNS_HRS06_TUNE, val);
|
|
|
|
/*
|
|
* Workaround for IP errata:
|
|
* The IP6116 SD/eMMC PHY design has a timing issue on receive data
|
|
* path. Send tune request twice.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
tmp |= SDHCI_CDNS_HRS06_TUNE_UP;
|
|
writel(tmp, reg);
|
|
|
|
ret = readl_poll_timeout(reg, tmp,
|
|
!(tmp & SDHCI_CDNS_HRS06_TUNE_UP), 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sdhci_cdns_execute_tuning(struct udevice *dev,
|
|
unsigned int opcode)
|
|
{
|
|
struct sdhci_cdns_plat *plat = dev_get_plat(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
int cur_streak = 0;
|
|
int max_streak = 0;
|
|
int end_of_streak = 0;
|
|
int i;
|
|
|
|
/*
|
|
* This handler only implements the eMMC tuning that is specific to
|
|
* this controller. The tuning for SD timing should be handled by the
|
|
* SDHCI core.
|
|
*/
|
|
if (!IS_MMC(mmc))
|
|
return -ENOTSUPP;
|
|
|
|
if (WARN_ON(opcode != MMC_CMD_SEND_TUNING_BLOCK_HS200))
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < SDHCI_CDNS_MAX_TUNING_LOOP; i++) {
|
|
if (sdhci_cdns_set_tune_val(plat, i) ||
|
|
mmc_send_tuning(mmc, opcode, NULL)) { /* bad */
|
|
cur_streak = 0;
|
|
} else { /* good */
|
|
cur_streak++;
|
|
if (cur_streak > max_streak) {
|
|
max_streak = cur_streak;
|
|
end_of_streak = i;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!max_streak) {
|
|
dev_err(dev, "no tuning point found\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return sdhci_cdns_set_tune_val(plat, end_of_streak - max_streak / 2);
|
|
}
|
|
|
|
static struct dm_mmc_ops sdhci_cdns_mmc_ops;
|
|
|
|
static int sdhci_cdns_bind(struct udevice *dev)
|
|
{
|
|
struct sdhci_cdns_plat *plat = dev_get_plat(dev);
|
|
|
|
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static int sdhci_cdns_probe(struct udevice *dev)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct sdhci_cdns_plat *plat = dev_get_plat(dev);
|
|
struct sdhci_host *host = dev_get_priv(dev);
|
|
fdt_addr_t base;
|
|
int ret;
|
|
|
|
base = dev_read_addr(dev);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->hrs_addr = devm_ioremap(dev, base, SZ_1K);
|
|
if (!plat->hrs_addr)
|
|
return -ENOMEM;
|
|
|
|
host->name = dev->name;
|
|
host->ioaddr = plat->hrs_addr + SDHCI_CDNS_SRS_BASE;
|
|
host->ops = &sdhci_cdns_ops;
|
|
host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD;
|
|
sdhci_cdns_mmc_ops = sdhci_ops;
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
sdhci_cdns_mmc_ops.execute_tuning = sdhci_cdns_execute_tuning;
|
|
#endif
|
|
|
|
ret = mmc_of_parse(dev, &plat->cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sdhci_cdns_phy_init(plat, gd->fdt_blob, dev_of_offset(dev));
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->mmc = &plat->mmc;
|
|
host->mmc->dev = dev;
|
|
ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
host->mmc->priv = host;
|
|
|
|
return sdhci_probe(dev);
|
|
}
|
|
|
|
static const struct udevice_id sdhci_cdns_match[] = {
|
|
{ .compatible = "socionext,uniphier-sd4hc" },
|
|
{ .compatible = "cdns,sd4hc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sdhci_cdns) = {
|
|
.name = "sdhci-cdns",
|
|
.id = UCLASS_MMC,
|
|
.of_match = sdhci_cdns_match,
|
|
.bind = sdhci_cdns_bind,
|
|
.probe = sdhci_cdns_probe,
|
|
.priv_auto = sizeof(struct sdhci_host),
|
|
.plat_auto = sizeof(struct sdhci_cdns_plat),
|
|
.ops = &sdhci_cdns_mmc_ops,
|
|
};
|