u-boot/test/dm/i2c.c
Simon Glass 911954859d dm: Use dm_scan_fdt_dev() directly where possible
Quite a few places have a bind() method which just calls dm_scan_fdt_dev().
We may as well call dm_scan_fdt_dev() directly. Update the code to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:54 -06:00

225 lines
7.2 KiB
C

/*
* Copyright (C) 2013 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*
* Note: Test coverage does not include 10-bit addressing
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/state.h>
#include <asm/test.h>
#include <dm/device-internal.h>
#include <dm/test.h>
#include <dm/uclass-internal.h>
#include <dm/util.h>
#include <test/ut.h>
static const int busnum;
static const int chip = 0x2c;
/* Test that we can find buses and chips */
static int dm_test_i2c_find(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
const int no_chip = 0x10;
ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
false, &bus));
/*
* The post_bind() method will bind devices to chip selects. Check
* this then remove the emulation and the slave device.
*/
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(dm_i2c_probe(bus, chip, 0, &dev));
ut_asserteq(-ENODEV, dm_i2c_probe(bus, no_chip, 0, &dev));
ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
return 0;
}
DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_read_write(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
uint8_t buf[5];
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
return 0;
}
DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_speed(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
uint8_t buf[5];
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
/* Use test mode so we create the required errors for invalid speeds */
sandbox_i2c_set_test_mode(bus, true);
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
ut_assertok(dm_i2c_set_bus_speed(bus, 100000));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(dm_i2c_set_bus_speed(bus, 400000));
ut_asserteq(400000, dm_i2c_get_bus_speed(bus));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_asserteq(-EINVAL, dm_i2c_write(dev, 0, buf, 5));
sandbox_i2c_set_test_mode(bus, false);
return 0;
}
DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_offset_len(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
uint8_t buf[5];
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
ut_assertok(i2c_set_chip_offset_len(dev, 1));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
/* This is not supported by the uclass */
ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5));
return 0;
}
DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_probe_empty(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
/* Use test mode so that this chip address will always probe */
sandbox_i2c_set_test_mode(bus, true);
ut_assertok(dm_i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev));
sandbox_i2c_set_test_mode(bus, false);
return 0;
}
DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_bytewise(struct unit_test_state *uts)
{
struct udevice *bus, *dev;
struct udevice *eeprom;
uint8_t buf[5];
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
/* Tell the EEPROM to only read/write one register at a time */
ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
ut_assertnonnull(eeprom);
sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE);
/* Now we only get the first byte - the rest will be 0xff */
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
/* If we do a separate transaction for each byte, it works */
ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
/* This will only write A */
ut_assertok(i2c_set_chip_flags(dev, 0));
ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
/* Check that the B was ignored */
ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf)));
/* Now write it again with the new flags, it should work */
ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS));
ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS |
DM_I2C_CHIP_RD_ADDRESS));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf)));
/* Restore defaults */
sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE);
ut_assertok(i2c_set_chip_flags(dev, 0));
return 0;
}
DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
static int dm_test_i2c_offset(struct unit_test_state *uts)
{
struct udevice *eeprom;
struct udevice *dev;
uint8_t buf[5];
ut_assertok(i2c_get_chip_for_busnum(busnum, chip, 1, &dev));
/* Do a transfer so we can find the emulator */
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
/* Offset length 0 */
sandbox_i2c_eeprom_set_offset_len(eeprom, 0);
ut_assertok(i2c_set_chip_offset_len(dev, 0));
ut_assertok(dm_i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf)));
/* Offset length 1 */
sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
ut_assertok(i2c_set_chip_offset_len(dev, 1));
ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf)));
/* Offset length 2 */
sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
ut_assertok(i2c_set_chip_offset_len(dev, 2));
ut_assertok(dm_i2c_write(dev, 0x210, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0x210, buf, 5));
ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
/* Offset length 3 */
sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
ut_assertok(i2c_set_chip_offset_len(dev, 2));
ut_assertok(dm_i2c_write(dev, 0x410, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0x410, buf, 5));
ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
/* Offset length 4 */
sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
ut_assertok(i2c_set_chip_offset_len(dev, 2));
ut_assertok(dm_i2c_write(dev, 0x420, (uint8_t *)"AB", 2));
ut_assertok(dm_i2c_read(dev, 0x420, buf, 5));
ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
/* Restore defaults */
sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
return 0;
}
DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);