mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-13 06:43:29 +08:00
172437472a
R8A7794 has the same sh-ether IP core as other SH/rmobile. This patch adds support of R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
660 lines
16 KiB
C
660 lines
16 KiB
C
/*
|
|
* sh_eth.c - Driver for Renesas ethernet controler.
|
|
*
|
|
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
|
|
* Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
|
|
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
|
|
* Copyright (C) 2013 Renesas Electronics Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "sh_eth.h"
|
|
|
|
#ifndef CONFIG_SH_ETHER_USE_PORT
|
|
# error "Please define CONFIG_SH_ETHER_USE_PORT"
|
|
#endif
|
|
#ifndef CONFIG_SH_ETHER_PHY_ADDR
|
|
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
|
|
#endif
|
|
|
|
#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
|
|
#define flush_cache_wback(addr, len) \
|
|
flush_dcache_range((u32)addr, (u32)(addr + len - 1))
|
|
#else
|
|
#define flush_cache_wback(...)
|
|
#endif
|
|
|
|
#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
|
|
#define invalidate_cache(addr, len) \
|
|
{ \
|
|
u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \
|
|
u32 start, end; \
|
|
\
|
|
start = (u32)addr; \
|
|
end = start + len; \
|
|
start &= ~(line_size - 1); \
|
|
end = ((end + line_size - 1) & ~(line_size - 1)); \
|
|
\
|
|
invalidate_dcache_range(start, end); \
|
|
}
|
|
#else
|
|
#define invalidate_cache(...)
|
|
#endif
|
|
|
|
#define TIMEOUT_CNT 1000
|
|
|
|
int sh_eth_send(struct eth_device *dev, void *packet, int len)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
int port = eth->port, ret = 0, timeout;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
|
|
if (!packet || len > 0xffff) {
|
|
printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* packet must be a 4 byte boundary */
|
|
if ((int)packet & 3) {
|
|
printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n"
|
|
, __func__);
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
|
|
/* Update tx descriptor */
|
|
flush_cache_wback(packet, len);
|
|
port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
|
|
port_info->tx_desc_cur->td1 = len << 16;
|
|
/* Must preserve the end of descriptor list indication */
|
|
if (port_info->tx_desc_cur->td0 & TD_TDLE)
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
|
|
else
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
|
|
|
|
/* Restart the transmitter if disabled */
|
|
if (!(sh_eth_read(eth, EDTRR) & EDTRR_TRNS))
|
|
sh_eth_write(eth, EDTRR_TRNS, EDTRR);
|
|
|
|
/* Wait until packet is transmitted */
|
|
timeout = TIMEOUT_CNT;
|
|
do {
|
|
invalidate_cache(port_info->tx_desc_cur,
|
|
sizeof(struct tx_desc_s));
|
|
udelay(100);
|
|
} while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
|
|
|
|
if (timeout < 0) {
|
|
printf(SHETHER_NAME ": transmit timeout\n");
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
port_info->tx_desc_cur++;
|
|
if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
int sh_eth_recv(struct eth_device *dev)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
int port = eth->port, len = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
uchar *packet;
|
|
|
|
/* Check if the rx descriptor is ready */
|
|
invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
|
|
if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
|
|
/* Check for errors */
|
|
if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
|
|
len = port_info->rx_desc_cur->rd1 & 0xffff;
|
|
packet = (uchar *)
|
|
ADDR_TO_P2(port_info->rx_desc_cur->rd2);
|
|
invalidate_cache(packet, len);
|
|
NetReceive(packet, len);
|
|
}
|
|
|
|
/* Make current descriptor available again */
|
|
if (port_info->rx_desc_cur->rd0 & RD_RDLE)
|
|
port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
|
|
else
|
|
port_info->rx_desc_cur->rd0 = RD_RACT;
|
|
/* Point to the next descriptor */
|
|
port_info->rx_desc_cur++;
|
|
if (port_info->rx_desc_cur >=
|
|
port_info->rx_desc_base + NUM_RX_DESC)
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
}
|
|
|
|
/* Restart the receiver if disabled */
|
|
if (!(sh_eth_read(eth, EDRRR) & EDRRR_R))
|
|
sh_eth_write(eth, EDRRR_R, EDRRR);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int sh_eth_reset(struct sh_eth_dev *eth)
|
|
{
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
int ret = 0, i;
|
|
|
|
/* Start e-dmac transmitter and receiver */
|
|
sh_eth_write(eth, EDSR_ENALL, EDSR);
|
|
|
|
/* Perform a software reset and wait for it to complete */
|
|
sh_eth_write(eth, EDMR_SRST, EDMR);
|
|
for (i = 0; i < TIMEOUT_CNT; i++) {
|
|
if (!(sh_eth_read(eth, EDMR) & EDMR_SRST))
|
|
break;
|
|
udelay(1000);
|
|
}
|
|
|
|
if (i == TIMEOUT_CNT) {
|
|
printf(SHETHER_NAME ": Software reset timeout\n");
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
#else
|
|
sh_eth_write(eth, sh_eth_read(eth, EDMR) | EDMR_SRST, EDMR);
|
|
udelay(3000);
|
|
sh_eth_write(eth, sh_eth_read(eth, EDMR) & ~EDMR_SRST, EDMR);
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int port = eth->port, i, ret = 0;
|
|
u32 tmp_addr;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
struct tx_desc_s *cur_tx_desc;
|
|
|
|
/*
|
|
* Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned
|
|
*/
|
|
port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
|
|
sizeof(struct tx_desc_s) +
|
|
TX_DESC_SIZE - 1);
|
|
if (!port_info->tx_desc_malloc) {
|
|
printf(SHETHER_NAME ": malloc failed\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
|
|
~(TX_DESC_SIZE - 1));
|
|
flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s));
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
|
|
cur_tx_desc++, i++) {
|
|
cur_tx_desc->td0 = 0x00;
|
|
cur_tx_desc->td1 = 0x00;
|
|
cur_tx_desc->td2 = 0x00;
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_tx_desc--;
|
|
cur_tx_desc->td0 |= TD_TDLE;
|
|
|
|
/* Point the controller to the tx descriptor list. Must use physical
|
|
addresses */
|
|
sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR);
|
|
sh_eth_write(eth, ADDR_TO_PHY(cur_tx_desc), TDFXR);
|
|
sh_eth_write(eth, 0x01, TDFFR);/* Last discriptor bit */
|
|
#endif
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int port = eth->port, i , ret = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
struct rx_desc_s *cur_rx_desc;
|
|
u32 tmp_addr;
|
|
u8 *rx_buf;
|
|
|
|
/*
|
|
* Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned
|
|
*/
|
|
port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
|
|
sizeof(struct rx_desc_s) +
|
|
RX_DESC_SIZE - 1);
|
|
if (!port_info->rx_desc_malloc) {
|
|
printf(SHETHER_NAME ": malloc failed\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
|
|
~(RX_DESC_SIZE - 1));
|
|
flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s));
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
|
|
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
|
|
/*
|
|
* Allocate rx data buffers. They must be 32 bytes aligned and in
|
|
* P2 area
|
|
*/
|
|
port_info->rx_buf_malloc = malloc(
|
|
NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1);
|
|
if (!port_info->rx_buf_malloc) {
|
|
printf(SHETHER_NAME ": malloc failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_buf_malloc;
|
|
}
|
|
|
|
tmp_addr = (u32)(((int)port_info->rx_buf_malloc
|
|
+ (RX_BUF_ALIGNE_SIZE - 1)) &
|
|
~(RX_BUF_ALIGNE_SIZE - 1));
|
|
port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_rx_desc = port_info->rx_desc_base,
|
|
rx_buf = port_info->rx_buf_base, i = 0;
|
|
i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
|
|
cur_rx_desc->rd0 = RD_RACT;
|
|
cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
|
|
cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf);
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_rx_desc--;
|
|
cur_rx_desc->rd0 |= RD_RDLE;
|
|
|
|
/* Point the controller to the rx descriptor list */
|
|
sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR);
|
|
sh_eth_write(eth, ADDR_TO_PHY(cur_rx_desc), RDFXR);
|
|
sh_eth_write(eth, RDFFR_RDLF, RDFFR);
|
|
#endif
|
|
|
|
return ret;
|
|
|
|
err_buf_malloc:
|
|
free(port_info->rx_desc_malloc);
|
|
port_info->rx_desc_malloc = NULL;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
|
|
{
|
|
int port = eth->port;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
|
|
if (port_info->tx_desc_malloc) {
|
|
free(port_info->tx_desc_malloc);
|
|
port_info->tx_desc_malloc = NULL;
|
|
}
|
|
}
|
|
|
|
static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
|
|
{
|
|
int port = eth->port;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
|
|
if (port_info->rx_desc_malloc) {
|
|
free(port_info->rx_desc_malloc);
|
|
port_info->rx_desc_malloc = NULL;
|
|
}
|
|
|
|
if (port_info->rx_buf_malloc) {
|
|
free(port_info->rx_buf_malloc);
|
|
port_info->rx_buf_malloc = NULL;
|
|
}
|
|
}
|
|
|
|
static int sh_eth_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = sh_eth_tx_desc_init(eth);
|
|
if (ret)
|
|
goto err_tx_init;
|
|
|
|
ret = sh_eth_rx_desc_init(eth);
|
|
if (ret)
|
|
goto err_rx_init;
|
|
|
|
return ret;
|
|
err_rx_init:
|
|
sh_eth_tx_desc_free(eth);
|
|
|
|
err_tx_init:
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_phy_config(struct sh_eth_dev *eth)
|
|
{
|
|
int port = eth->port, ret = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
struct eth_device *dev = port_info->dev;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_connect(
|
|
miiphy_get_dev_by_name(dev->name),
|
|
port_info->phy_addr, dev, CONFIG_SH_ETHER_PHY_MODE);
|
|
port_info->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
|
|
{
|
|
int port = eth->port, ret = 0;
|
|
u32 val;
|
|
struct sh_eth_info *port_info = ð->port_info[port];
|
|
struct eth_device *dev = port_info->dev;
|
|
struct phy_device *phy;
|
|
|
|
/* Configure e-dmac registers */
|
|
sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) |
|
|
(EMDR_DESC | EDMR_EL), EDMR);
|
|
|
|
sh_eth_write(eth, 0, EESIPR);
|
|
sh_eth_write(eth, 0, TRSCER);
|
|
sh_eth_write(eth, 0, TFTR);
|
|
sh_eth_write(eth, (FIFO_SIZE_T | FIFO_SIZE_R), FDR);
|
|
sh_eth_write(eth, RMCR_RST, RMCR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(eth, 0, RPADIR);
|
|
#endif
|
|
sh_eth_write(eth, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR);
|
|
|
|
/* Configure e-mac registers */
|
|
sh_eth_write(eth, 0, ECSIPR);
|
|
|
|
/* Set Mac address */
|
|
val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
|
|
dev->enetaddr[2] << 8 | dev->enetaddr[3];
|
|
sh_eth_write(eth, val, MAHR);
|
|
|
|
val = dev->enetaddr[4] << 8 | dev->enetaddr[5];
|
|
sh_eth_write(eth, val, MALR);
|
|
|
|
sh_eth_write(eth, RFLR_RFL_MIN, RFLR);
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(eth, 0, PIPR);
|
|
#endif
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(eth, APR_AP, APR);
|
|
sh_eth_write(eth, MPR_MP, MPR);
|
|
sh_eth_write(eth, TPAUSER_TPAUSE, TPAUSER);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
|
|
sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
|
|
#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
|
|
defined(CONFIG_R8A7794)
|
|
sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR);
|
|
#endif
|
|
/* Configure phy */
|
|
ret = sh_eth_phy_config(eth);
|
|
if (ret) {
|
|
printf(SHETHER_NAME ": phy config timeout\n");
|
|
goto err_phy_cfg;
|
|
}
|
|
phy = port_info->phydev;
|
|
ret = phy_startup(phy);
|
|
if (ret) {
|
|
printf(SHETHER_NAME ": phy startup failure\n");
|
|
return ret;
|
|
}
|
|
|
|
val = 0;
|
|
|
|
/* Set the transfer speed */
|
|
if (phy->speed == 100) {
|
|
printf(SHETHER_NAME ": 100Base/");
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(eth, GECMR_100B, GECMR);
|
|
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
|
|
sh_eth_write(eth, 1, RTRATE);
|
|
#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
|
|
defined(CONFIG_R8A7791) || defined(CONFIG_R8A7794)
|
|
val = ECMR_RTM;
|
|
#endif
|
|
} else if (phy->speed == 10) {
|
|
printf(SHETHER_NAME ": 10Base/");
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(eth, GECMR_10B, GECMR);
|
|
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
|
|
sh_eth_write(eth, 0, RTRATE);
|
|
#endif
|
|
}
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
else if (phy->speed == 1000) {
|
|
printf(SHETHER_NAME ": 1000Base/");
|
|
sh_eth_write(eth, GECMR_1000B, GECMR);
|
|
}
|
|
#endif
|
|
|
|
/* Check if full duplex mode is supported by the phy */
|
|
if (phy->duplex) {
|
|
printf("Full\n");
|
|
sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM),
|
|
ECMR);
|
|
} else {
|
|
printf("Half\n");
|
|
sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR);
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_phy_cfg:
|
|
return ret;
|
|
}
|
|
|
|
static void sh_eth_start(struct sh_eth_dev *eth)
|
|
{
|
|
/*
|
|
* Enable the e-dmac receiver only. The transmitter will be enabled when
|
|
* we have something to transmit
|
|
*/
|
|
sh_eth_write(eth, EDRRR_R, EDRRR);
|
|
}
|
|
|
|
static void sh_eth_stop(struct sh_eth_dev *eth)
|
|
{
|
|
sh_eth_write(eth, ~EDRRR_R, EDRRR);
|
|
}
|
|
|
|
int sh_eth_init(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
int ret = 0;
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
|
|
ret = sh_eth_reset(eth);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = sh_eth_desc_init(eth);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = sh_eth_config(eth, bd);
|
|
if (ret)
|
|
goto err_config;
|
|
|
|
sh_eth_start(eth);
|
|
|
|
return ret;
|
|
|
|
err_config:
|
|
sh_eth_tx_desc_free(eth);
|
|
sh_eth_rx_desc_free(eth);
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
void sh_eth_halt(struct eth_device *dev)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
sh_eth_stop(eth);
|
|
}
|
|
|
|
int sh_eth_initialize(bd_t *bd)
|
|
{
|
|
int ret = 0;
|
|
struct sh_eth_dev *eth = NULL;
|
|
struct eth_device *dev = NULL;
|
|
|
|
eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
|
|
if (!eth) {
|
|
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev = (struct eth_device *)malloc(sizeof(struct eth_device));
|
|
if (!dev) {
|
|
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
memset(eth, 0, sizeof(struct sh_eth_dev));
|
|
|
|
eth->port = CONFIG_SH_ETHER_USE_PORT;
|
|
eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
|
|
|
|
dev->priv = (void *)eth;
|
|
dev->iobase = 0;
|
|
dev->init = sh_eth_init;
|
|
dev->halt = sh_eth_halt;
|
|
dev->send = sh_eth_send;
|
|
dev->recv = sh_eth_recv;
|
|
eth->port_info[eth->port].dev = dev;
|
|
|
|
sprintf(dev->name, SHETHER_NAME);
|
|
|
|
/* Register Device to EtherNet subsystem */
|
|
eth_register(dev);
|
|
|
|
bb_miiphy_buses[0].priv = eth;
|
|
miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write);
|
|
|
|
if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr))
|
|
puts("Please set MAC address\n");
|
|
|
|
return ret;
|
|
|
|
err:
|
|
if (dev)
|
|
free(dev);
|
|
|
|
if (eth)
|
|
free(eth);
|
|
|
|
printf(SHETHER_NAME ": Failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/******* for bb_miiphy *******/
|
|
static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MMD, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MMD, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
|
|
if (v)
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDO, PIR);
|
|
else
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDO, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
|
|
*v = (sh_eth_read(eth, PIR) & PIR_MDI) >> 3;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
|
|
if (v)
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDC, PIR);
|
|
else
|
|
sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDC, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
|
|
{
|
|
udelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct bb_miiphy_bus bb_miiphy_buses[] = {
|
|
{
|
|
.name = "sh_eth",
|
|
.init = sh_eth_bb_init,
|
|
.mdio_active = sh_eth_bb_mdio_active,
|
|
.mdio_tristate = sh_eth_bb_mdio_tristate,
|
|
.set_mdio = sh_eth_bb_set_mdio,
|
|
.get_mdio = sh_eth_bb_get_mdio,
|
|
.set_mdc = sh_eth_bb_set_mdc,
|
|
.delay = sh_eth_bb_delay,
|
|
}
|
|
};
|
|
int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
|